Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] CFGSR not opening on Ubuntu under Wine

Expand Messages
  • John Williams
    I don t know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me. Can you confirm that the SRDLL.dll is installed and
    Message 1 of 13 , Nov 1, 2011
    • 0 Attachment
      I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

      Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

      John - ke5ssh

      On 11/1/2011 9:40 AM, Sid Boyce wrote:
       

      Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
      73 ... Sid.

      On 01/11/11 12:14, ak4jr wrote:

       

      Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



      -- 
      Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
      Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
      Senior Staff Specialist, Cricket Coach
      Microsoft Windows Free Zone - Linux used for all Computing Tasks
      

      -- 
      
      John Williams
      
      KE5SSH - ham since 2007
      WQKA523 - GMRS for family use on the farm
      
    • Sid Boyce
      The only SDR.dll I have around is for WSPR, I don t know if that is what s needed and where it should be put for CFGSR. 73 ... Sid. ... -- Sid Boyce ...
      Message 2 of 13 , Nov 1, 2011
      • 0 Attachment
        The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
        73 ... Sid.

        On 01/11/11 14:58, John Williams wrote:
         

        I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

        Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

        John - ke5ssh

        On 11/1/2011 9:40 AM, Sid Boyce wrote:

         

        Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
        73 ... Sid.

        On 01/11/11 12:14, ak4jr wrote:

         

        Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



        -- 
        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
        Senior Staff Specialist, Cricket Coach
        Microsoft Windows Free Zone - Linux used for all Computing Tasks
        

        -- 
        
        John Williams
        
        KE5SSH - ham since 2007
        WQKA523 - GMRS for family use on the farm
        


        -- 
        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
        Senior Staff Specialist, Cricket Coach
        Microsoft Windows Free Zone - Linux used for all Computing Tasks
        
      • Sid Boyce
        I ll have to dig further having looked at the errors again - need to install libusb and SDR.dll. wine: configuration in /root/.wine has been updated.
        Message 3 of 13 , Nov 1, 2011
        • 0 Attachment
          I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
          wine: configuration in '/root/.wine' has been updated.
          err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
          err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
          err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
          err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
          73 ... Sid.

          On 01/11/11 15:20, Sid Boyce wrote:
           

          The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
          73 ... Sid.

          On 01/11/11 14:58, John Williams wrote:

           

          I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

          Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

          John - ke5ssh

          On 11/1/2011 9:40 AM, Sid Boyce wrote:

           

          Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
          73 ... Sid.

          On 01/11/11 12:14, ak4jr wrote:

           

          Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



          -- 
          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
          Senior Staff Specialist, Cricket Coach
          Microsoft Windows Free Zone - Linux used for all Computing Tasks
          

          -- 
          
          John Williams
          
          KE5SSH - ham since 2007
          WQKA523 - GMRS for family use on the farm
          


          -- 
          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
          Senior Staff Specialist, Cricket Coach
          Microsoft Windows Free Zone - Linux used for all Computing Tasks
          


          -- 
          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
          Senior Staff Specialist, Cricket Coach
          Microsoft Windows Free Zone - Linux used for all Computing Tasks
          
        • Sid Boyce
          A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system
          Message 4 of 13 , Nov 1, 2011
          • 0 Attachment
            A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system and ~/.wine/windows/system32.
            Basically I'm not a Windows person though I have programs like Hamcalc, Elsie, freepcb, schemedit, un_dipfree_en.exe_15033, Rocky and Winrad installed, except the last 2 have a problem with sound.

            The guy at Codeweavers had exactly the same distro installation, hardware, etc. but sound worked for him and we never got to the cause. Going back some years all that worked fine with Windows Media Player.
            73 ... Sid.

            On 01/11/11 15:26, Sid Boyce wrote:
             

            I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
            wine: configuration in '/root/.wine' has been updated.
            err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
            err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
            err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
            err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
            73 ... Sid.

            On 01/11/11 15:20, Sid Boyce wrote:

             

            The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
            73 ... Sid.

            On 01/11/11 14:58, John Williams wrote:

             

            I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

            Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

            John - ke5ssh

            On 11/1/2011 9:40 AM, Sid Boyce wrote:

             

            Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
            73 ... Sid.

            On 01/11/11 12:14, ak4jr wrote:

             

            Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            

            -- 
            
            John Williams
            
            KE5SSH - ham since 2007
            WQKA523 - GMRS for family use on the farm
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            
        • John Williams
          I am guessing that those files were in the cfgsr.msi file. How did you install the code? I can install it on a windows machine and send you the files... John -
          Message 5 of 13 , Nov 1, 2011
          • 0 Attachment
            I am guessing that those files were in the cfgsr.msi file. How did you install the code?

            I can install it on a windows machine and send you the files...

            John - ke5ssh

            On 11/1/2011 11:06 AM, Sid Boyce wrote:
             

            A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system and ~/.wine/windows/system32.
            Basically I'm not a Windows person though I have programs like Hamcalc, Elsie, freepcb, schemedit, un_dipfree_en.exe_15033, Rocky and Winrad installed, except the last 2 have a problem with sound.

            The guy at Codeweavers had exactly the same distro installation, hardware, etc. but sound worked for him and we never got to the cause. Going back some years all that worked fine with Windows Media Player.
            73 ... Sid.

            On 01/11/11 15:26, Sid Boyce wrote:

             

            I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
            wine: configuration in '/root/.wine' has been updated.
            err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
            err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
            err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
            err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
            73 ... Sid.

            On 01/11/11 15:20, Sid Boyce wrote:

             

            The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
            73 ... Sid.

            On 01/11/11 14:58, John Williams wrote:

             

            I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

            Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

            John - ke5ssh

            On 11/1/2011 9:40 AM, Sid Boyce wrote:

             

            Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
            73 ... Sid.

            On 01/11/11 12:14, ak4jr wrote:

             

            Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            

            -- 
            
            John Williams
            
            KE5SSH - ham since 2007
            WQKA523 - GMRS for family use on the farm
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            


            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            

            -- 
            
            John Williams
            
            KE5SSH - ham since 2007
            WQKA523 - GMRS for family use on the farm
            
          • John Williams
            Sid, Found this on google With Ubuntu Linux and p7zip installed, rename the .msi file to .7z to open it with the Archive manager. John - ke5ssh ... -- John
            Message 6 of 13 , Nov 1, 2011
            • 0 Attachment
              Sid,

              Found this on google

              With Ubuntu Linux and p7zip installed, rename the .msi file to .7z to open it with the Archive manager.

              John - ke5ssh

              On 11/1/2011 11:06 AM, Sid Boyce wrote:
               

              A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system and ~/.wine/windows/system32.
              Basically I'm not a Windows person though I have programs like Hamcalc, Elsie, freepcb, schemedit, un_dipfree_en.exe_15033, Rocky and Winrad installed, except the last 2 have a problem with sound.

              The guy at Codeweavers had exactly the same distro installation, hardware, etc. but sound worked for him and we never got to the cause. Going back some years all that worked fine with Windows Media Player.
              73 ... Sid.

              On 01/11/11 15:26, Sid Boyce wrote:

               

              I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
              wine: configuration in '/root/.wine' has been updated.
              err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
              err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
              err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
              err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
              73 ... Sid.

              On 01/11/11 15:20, Sid Boyce wrote:

               

              The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
              73 ... Sid.

              On 01/11/11 14:58, John Williams wrote:

               

              I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

              Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

              John - ke5ssh

              On 11/1/2011 9:40 AM, Sid Boyce wrote:

               

              Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
              73 ... Sid.

              On 01/11/11 12:14, ak4jr wrote:

               

              Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



              -- 
              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
              Senior Staff Specialist, Cricket Coach
              Microsoft Windows Free Zone - Linux used for all Computing Tasks
              

              -- 
              
              John Williams
              
              KE5SSH - ham since 2007
              WQKA523 - GMRS for family use on the farm
              


              -- 
              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
              Senior Staff Specialist, Cricket Coach
              Microsoft Windows Free Zone - Linux used for all Computing Tasks
              


              -- 
              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
              Senior Staff Specialist, Cricket Coach
              Microsoft Windows Free Zone - Linux used for all Computing Tasks
              


              -- 
              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
              Senior Staff Specialist, Cricket Coach
              Microsoft Windows Free Zone - Linux used for all Computing Tasks
              

              -- 
              
              John Williams
              
              KE5SSH - ham since 2007
              WQKA523 - GMRS for family use on the farm
              
            • Sid Boyce
              Thanks, I can then try it under wine. I installed it in Crossover office from the .msi file. Just checked and it failed to start but with no error output.
              Message 7 of 13 , Nov 1, 2011
              • 0 Attachment
                Thanks, I can then try it under wine.
                I installed it in Crossover office from the .msi file. Just checked and it failed to start but with no error output. Everything else at lest starts and most run fine.
                Crossover Office is usually ahead of wine. They get paid to support certain applications and they leave it a reasonable while before contributing the changes to wine so as to allow their customers to benefit from what they paid for.
                73 ... Sid.

                On 01/11/11 16:33, John Williams wrote:
                 

                I am guessing that those files were in the cfgsr.msi file. How did you install the code?

                I can install it on a windows machine and send you the files...

                John - ke5ssh

                On 11/1/2011 11:06 AM, Sid Boyce wrote:

                 

                A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system and ~/.wine/windows/system32.
                Basically I'm not a Windows person though I have programs like Hamcalc, Elsie, freepcb, schemedit, un_dipfree_en.exe_15033, Rocky and Winrad installed, except the last 2 have a problem with sound.

                The guy at Codeweavers had exactly the same distro installation, hardware, etc. but sound worked for him and we never got to the cause. Going back some years all that worked fine with Windows Media Player.
                73 ... Sid.

                On 01/11/11 15:26, Sid Boyce wrote:

                 

                I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
                wine: configuration in '/root/.wine' has been updated.
                err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
                err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
                err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
                err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
                73 ... Sid.

                On 01/11/11 15:20, Sid Boyce wrote:

                 

                The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
                73 ... Sid.

                On 01/11/11 14:58, John Williams wrote:

                 

                I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

                Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

                John - ke5ssh

                On 11/1/2011 9:40 AM, Sid Boyce wrote:

                 

                Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
                73 ... Sid.

                On 01/11/11 12:14, ak4jr wrote:

                 

                Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



                -- 
                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                Senior Staff Specialist, Cricket Coach
                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                

                -- 
                
                John Williams
                
                KE5SSH - ham since 2007
                WQKA523 - GMRS for family use on the farm
                


                -- 
                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                Senior Staff Specialist, Cricket Coach
                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                


                -- 
                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                Senior Staff Specialist, Cricket Coach
                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                


                -- 
                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                Senior Staff Specialist, Cricket Coach
                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                

                -- 
                
                John Williams
                
                KE5SSH - ham since 2007
                WQKA523 - GMRS for family use on the farm
                


              • -- 
                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                Senior Staff Specialist, Cricket Coach
                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                
              • ak4jr
                Solved the problem by switching to MAC + DL2SDR s DSP Radio. Plug-in, and works, no error messages or anything, works instantly. I can change the frequency of
                Message 8 of 13 , Nov 1, 2011
                • 0 Attachment
                  Solved the problem by switching to MAC + DL2SDR's DSP Radio. Plug-in, and works, no error messages or anything, works instantly. I can change the frequency of the oscillator remotely from DSP Radio. Just have to put the rest of the parts on the board now and test receive. I will post my experiences with this MAC based software once the PCB is complete.

                  Anyone needing a Notebook with Ubuntu? I'm selling mine. From now on, MAC only.

                  --- In softrock40@yahoogroups.com, "ak4jr" <rolfbertramdotcom@...> wrote:
                  >
                  > Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.
                  >
                • JOHN GREUSEL
                  Most of us have only used Windows (or Linux) software. If you d do a brief review of DSP Radio for this group it would be well received. John KC9OJV
                  Message 9 of 13 , Nov 1, 2011
                  • 0 Attachment
                    Most of us have only used Windows (or Linux) software.
                    If you'd do a brief review of DSP Radio for this group it would be well received.

                    John
                    KC9OJV

                    From: ak4jr <rolfbertramdotcom@...>
                    To: softrock40@yahoogroups.com
                    Sent: Tuesday, November 1, 2011 1:14 PM
                    Subject: [softrock40] Re: CFGSR not opening on Ubuntu under Wine - Solved: Switched to MAC

                     


                    Solved the problem by switching to MAC + DL2SDR's DSP Radio. Plug-in, and works, no error messages or anything, works instantly. I can change the frequency of the oscillator remotely from DSP Radio. Just have to put the rest of the parts on the board now and test receive. I will post my experiences with this MAC based software once the PCB is complete.

                    Anyone needing a Notebook with Ubuntu? I'm selling mine. From now on, MAC only.

                    --- In softrock40@yahoogroups.com, "ak4jr" <rolfbertramdotcom@...> wrote:
                    >
                    > Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.
                    >



                  • William Dillon
                    I m just interjecting here, but... I briefly discussed it on my blog entry about weather satellites: http://alternet.us.com/?p=1398 I _LOVE_ DSP Radio. I
                    Message 10 of 13 , Nov 1, 2011
                    • 0 Attachment
                      I'm just interjecting here, but...

                      I briefly discussed it on my blog entry about weather satellites: http://alternet.us.com/?p=1398

                      I _LOVE_ DSP Radio.  I tried every SDR app I could get my hands on, for linux windows and mac, and I think DSP Radio is the best.  I just wish it was more scriptable.  In fact, I get better copy of APT transmissions using DSP Radio than I do with GNU Radio.

                      The only real gotcha that I've found is that I can't get sound routing (ala Jack or Soundflower) in and out of DSP Radio w/o major stuttering.

                      Just as an f.y.i, I don't know if google has updated yet, but the DSP Radio page had to move because .mac websites went away.  It's here now:

                      Just my $.02

                      - Will

                      On Nov 1, 2011, at 11:31 AM, JOHN GREUSEL wrote:

                       

                      Most of us have only used Windows (or Linux) software.
                      If you'd do a brief review of DSP Radio for this group it would be well received.

                      John
                      KC9OJV

                      From: ak4jr <rolfbertramdotcom@...>
                      To: softrock40@yahoogroups.com
                      Sent: Tuesday, November 1, 2011 1:14 PM
                      Subject: [softrock40] Re: CFGSR not opening on Ubuntu under Wine - Solved: Switched to MAC

                       


                      Solved the problem by switching to MAC + DL2SDR's DSP Radio. Plug-in, and works, no error messages or anything, works instantly. I can change the frequency of the oscillator remotely from DSP Radio. Just have to put the rest of the parts on the board now and test receive. I will post my experiences with this MAC based software once the PCB is complete.

                      Anyone needing a Notebook with Ubuntu? I'm selling mine. From now on, MAC only.

                      --- In softrock40@yahoogroups.com, "ak4jr" <rolfbertramdotcom@...> wrote:
                      >
                      > Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.
                      >





                    • Sid Boyce
                      OK, 7z e Install_CFGSR_V2.3.msi extracts it but there are no dll s or executable files there. Under Crossover Office cxrun Install_CFGSR_V2.3.msi offered
                      Message 11 of 13 , Nov 1, 2011
                      • 0 Attachment
                        OK, "7z e  Install_CFGSR_V2.3.msi" extracts it but there are no dll's or executable files there.
                        Under Crossover Office "cxrun Install_CFGSR_V2.3.msi" offered to repair and said it had but the real problem was libusb0.dll missing.

                        I think that is how I installed it originally.

                        I copied libusb0_x86.dll and libusb0.sys to ~/.cxoffice/winxp/drive_c/windows/system/ and system32 as libusb0.dll and libusb0.sys
                        This time cfgsr comes up but can't open the si570 - "USB device not found".

                        testlibusb-win.exe  returns no devices:
                        DLL version:    1.2.5.0
                        Driver version:    -1.-1.-1.-1

                        bus/device  idVendor/idProduct

                        --------------------------------------------
                        I'll try to get back to it later.
                        73 ... Sid.
                         
                        On 01/11/11 17:05, John Williams wrote:
                         

                        Sid,

                        Found this on google

                        With Ubuntu Linux and p7zip installed, rename the .msi file to .7z to open it with the Archive manager.

                        John - ke5ssh

                        On 11/1/2011 11:06 AM, Sid Boyce wrote:

                         

                        A google search for SDRLL.dll turns up nothing. Where to get? I got libusb-win32-bin-1.2.5.0.zip and placed the .dll and .sys files in ~/.wine/windows/system and ~/.wine/windows/system32.
                        Basically I'm not a Windows person though I have programs like Hamcalc, Elsie, freepcb, schemedit, un_dipfree_en.exe_15033, Rocky and Winrad installed, except the last 2 have a problem with sound.

                        The guy at Codeweavers had exactly the same distro installation, hardware, etc. but sound worked for him and we never got to the cause. Going back some years all that worked fine with Windows Media Player.
                        73 ... Sid.

                        On 01/11/11 15:26, Sid Boyce wrote:

                         

                        I'll have to dig further having looked at the errors again - need to install libusb and SDR.dll.
                        wine: configuration in '/root/.wine' has been updated.
                        err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
                        err:module:import_dll Library libusb0.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\SRDLL.dll") not found
                        err:module:import_dll Library SRDLL.dll (which is needed by L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe") not found
                        err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\lancelot\\ftp\\10APR\\CFGSR_V1.3.exe" failed, status c0000135
                        73 ... Sid.

                        On 01/11/11 15:20, Sid Boyce wrote:

                         

                        The only SDR.dll I have around is for WSPR, I don't know if that is what's needed and where it should be put for CFGSR.
                        73 ... Sid.

                        On 01/11/11 14:58, John Williams wrote:

                         

                        I don't know whether this is supposed to work or not. Wine has always been a bit of a crap shoot for me.

                        Can you confirm that the SRDLL.dll is installed and accessible to CFGSR.exe?

                        John - ke5ssh

                        On 11/1/2011 9:40 AM, Sid Boyce wrote:

                         

                        Same under openSUSE with wine or Crossover Office. It doesn't even throw up any error messages.
                        73 ... Sid.

                        On 01/11/11 12:14, ak4jr wrote:

                         

                        Clicking on CFGSR under Wine on Ubuntu makes the busy symbol circle for a few seconds, but it does not open the CFGSR window.



                        -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        

                        -- 
                        
                        John Williams
                        
                        KE5SSH - ham since 2007
                        WQKA523 - GMRS for family use on the farm
                        


                        -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        


                        -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        


                        -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        

                        -- 
                        
                        John Williams
                        
                        KE5SSH - ham since 2007
                        WQKA523 - GMRS for family use on the farm
                        


                      • -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        
                        Your message has been successfully submitted and would be delivered to recipients shortly.