Loading ...
Sorry, an error occurred while loading the content.
 

Re: CFGSR Program

Expand Messages
  • k5dnl
    Jose , Thanks for info Ken -===================================
    Message 1 of 3 , Sep 1, 2011
      Jose ,
      Thanks for info
      Ken

      -===================================

      --- In softrock40@yahoogroups.com, Jose Bonanca <jabct1aos@...> wrote:
      >
      > Have you installed the USB driver?
      > Course not.... you must get a recognised device ti install the driver. so
      > check if you get 5 V from the USB port and the 3.3V from the LP regulator.
      > then again you can check the 3.3V from pin 6 of si570 and pin 4 Of the AVR.
      >
      > 73
      >
      > On 1 September 2011 17:44, k5dnl <kwroberson@...> wrote:
      >
      > > **
      > >
      > >
      > > Hello All,
      > >
      > > I'm the newbie , And not having any luck.
      > > Can not get CFGSR program to work with USB
      > > port.
      > > The computer is Acer netbook.
      > > The message is ( USB device not recognized )
      > > In device manager it is listed as unknown device .
      > >
      > > Thanks
      > > Ken K5DNL
      > >
      > >
      > >
      >
      >
      >
      > --
      > Jose (Ct1aos)
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.