Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Fwd: Re: [QRP-L] Surface Mount Power Splitter Wanted

Expand Messages
  • Rein A. Smit
    Hi Cecil, I am in for 2 ea. 73 Rein W6/PA0ZN
    Message 1 of 4 , Aug 4, 2006
    • 0 Attachment
      Hi Cecil,


      I am in for 2 ea.


      73 Rein W6/PA0ZN



      KD5NWA wrote:

      >
      >
      > Mini-Circuits makes a SMT signal splitter that is quite useful for use in
      > SDR radios or in transmitters. I'm thinking of buying some of these
      > devices from Mini-Circuits and thought if others were interested to the
      > point where we could make the 25 unit pricing we could save a lot of money.
      > The unit price is $15.10 but at the 25 quantity order the part cost $2.64
      > each. The part is rated 5MHz to 1 GHz with very flat response in the whole
      > range.
      >
      > The device specs are listed below, I'm looking at the SBTC-2-10L+ device
      > for
      > the buy.
      >
      > <http://www.minicircuits.com/SBTC-2-10_10L.pdf
      > <http://www.minicircuits.com/SBTC-2-10_10L.pdf> >
      >
      > I would sell these at Cost+Shipping+PayPal fees+ Mailing fees, I will make
      > nothing on the deal but then I don't want to loose anything either.
      >
      > Shipping cost will be determined by the number of parts ordered. Mailing
      > fees will be the cost of a padded envelope + stamp cost, Internaltional
      > orders are $.90 + the cost of a padded envelope.
      >
      > If interested let me know how may you are interested in, and if we get a
      > sufficient desired quantity I can make a descision to make the buy.
      >
      > Thanks
      >
      > --
      >
      > Cecil
      > KD5NWA
      > www.qrpradio.com www.hpsdr.com
      >
      > "Life is short and I'm too busy tipping Sacred Cows." Don Seglio Batuna
      >
      >
      > ------------------------------------------------------------------------
      >
      > Subject:
      > Re: [QRP-L] Surface Mount Power Splitter Wanted
      > From:
      > Ceciliio A Bayona <kd5nwa@...>
      > Date:
      > Thu, 3 Aug 2006 07:06:54 -0500
      > To:
      > Leon Heller <leon.heller@...>
      >
      > To:
      > Leon Heller <leon.heller@...>
      > CC:
      > qrp-l@...
      >
      >
      > $1.69 is the 1000 price, a more realistic price is $2.64 for qty 25 of
      > the "L" part.
      >
      > I would be interested in a couple of these things also, I will think
      > about it and by this weekend decide if I want to make a group purchase
      > on the item.
      >
      > I'll figure the cost and see if there is enough interest in some of the
      > SDR list, and I will post back after a decision is made. I will looking
      > at the SBCT-2-10L+ for the buy.
      >
      > I would sell these if I do at Cost+Shipping+PayPal fees, I will make
      > nothing on the deal but then I don't want to loose anything either.
      >
      > Thanks
      >
      > On Aug 3, 2006, at 2:07 AM, Leon Heller wrote:
      >
      >> ----- Original Message ----- From: "Kurt Loken" <ae6uj@...>
      >> To: <qrp-l@...>
      >> Sent: Thursday, August 03, 2006 5:10 AM
      >> Subject: [QRP-L] Surface Mount Power Splitter Wanted
      >>
      >>
      >> Hello All,
      >>
      >> Any one know where I could buy one of these
      >> Minicurcuit surface mount power splitters for the
      >> price on the spec sheet ($1.69)? Looks like they want
      >> $15 if I try to buy 1.
      >>
      >> http://www.minicircuits.com/SBTC-2-10_10L.pdf
      >>
      >> The last time I needed a few mixers from MCL I bought 25 pieces to
      >> get a good price on them, kept some for myself and sold the unwanted
      >> ones to other hams. I got my mixers for nothing, and the people who
      >> bought them got them much cheaper than they could get them from the
      >> usual suppliers.
      >>
      >> 73, Leon
      >> ______________________________________________________________
      >> QRP-L mailing list
      >> Home: http://mailman.qth.net/mailman/listinfo/qrp-l
      >> Help: http://mailman.qth.net/mmfaq.htm
      >> Post: mailto:QRP-L@...
      >
      >
      > ______________________________________________________________
      > QRP-L mailing list
      > Home: http://mailman.qth.net/mailman/listinfo/qrp-l
      > Help: http://mailman.qth.net/mmfaq.htm
      > Post: mailto:QRP-L@...
    • Ben Hall
      Hi Cecil, I d be in for 4 of them at the $2.64 price... thanks and 73, ben, KD5BYB
      Message 2 of 4 , Aug 4, 2006
      • 0 Attachment
        Hi Cecil,

        I'd be in for 4 of them at the $2.64 price...

        thanks and 73,
        ben, KD5BYB


        KD5NWA wrote:
        >
        >
        > Mini-Circuits makes a SMT signal splitter that is quite useful for use in
        > SDR radios or in transmitters. I'm thinking of buying some of these
        > devices from Mini-Circuits and thought if others were interested to the
        > point where we could make the 25 unit pricing we could save a lot of money.
        > The unit price is $15.10 but at the 25 quantity order the part cost $2.64
        > each. The part is rated 5MHz to 1 GHz with very flat response in the whole
        > range.
        >
        > The device specs are listed below, I'm looking at the SBTC-2-10L+ device
        > for
        > the buy.
        >
        > <http://www.minicircuits.com/SBTC-2-10_10L.pdf
        > <http://www.minicircuits.com/SBTC-2-10_10L.pdf> >
        >
        > I would sell these at Cost+Shipping+PayPal fees+ Mailing fees, I will make
        > nothing on the deal but then I don't want to loose anything either.
        >
        > Shipping cost will be determined by the number of parts ordered. Mailing
        > fees will be the cost of a padded envelope + stamp cost, Internaltional
        > orders are $.90 + the cost of a padded envelope.
        >
        > If interested let me know how may you are interested in, and if we get a
        > sufficient desired quantity I can make a descision to make the buy.
        >
        > Thanks
        >
        > --
        >
        > Cecil
        > KD5NWA
        > www.qrpradio.com www.hpsdr.com
        >
        > "Life is short and I'm too busy tipping Sacred Cows." Don Seglio Batuna
        >
        >
        > ------------------------------------------------------------------------
        >
        > Subject:
        > Re: [QRP-L] Surface Mount Power Splitter Wanted
        > From:
        > Ceciliio A Bayona <kd5nwa@...>
        > Date:
        > Thu, 3 Aug 2006 07:06:54 -0500
        > To:
        > Leon Heller <leon.heller@...>
        >
        > To:
        > Leon Heller <leon.heller@...>
        > CC:
        > qrp-l@...
        >
        >
        > $1.69 is the 1000 price, a more realistic price is $2.64 for qty 25 of
        > the "L" part.
        >
        > I would be interested in a couple of these things also, I will think
        > about it and by this weekend decide if I want to make a group purchase
        > on the item.
        >
        > I'll figure the cost and see if there is enough interest in some of the
        > SDR list, and I will post back after a decision is made. I will looking
        > at the SBCT-2-10L+ for the buy.
        >
        > I would sell these if I do at Cost+Shipping+PayPal fees, I will make
        > nothing on the deal but then I don't want to loose anything either.
        >
        > Thanks
        >
        > On Aug 3, 2006, at 2:07 AM, Leon Heller wrote:
        >
        >> ----- Original Message ----- From: "Kurt Loken" <ae6uj@...>
        >> To: <qrp-l@...>
        >> Sent: Thursday, August 03, 2006 5:10 AM
        >> Subject: [QRP-L] Surface Mount Power Splitter Wanted
        >>
        >>
        >> Hello All,
        >>
        >> Any one know where I could buy one of these
        >> Minicurcuit surface mount power splitters for the
        >> price on the spec sheet ($1.69)? Looks like they want
        >> $15 if I try to buy 1.
        >>
        >> http://www.minicircuits.com/SBTC-2-10_10L.pdf
        >>
        >> The last time I needed a few mixers from MCL I bought 25 pieces to get
        >> a good price on them, kept some for myself and sold the unwanted ones
        >> to other hams. I got my mixers for nothing, and the people who bought
        >> them got them much cheaper than they could get them from the usual
        >> suppliers.
        >>
        >> 73, Leon
        >> ______________________________________________________________
        >> QRP-L mailing list
        >> Home: http://mailman.qth.net/mailman/listinfo/qrp-l
        >> Help: http://mailman.qth.net/mmfaq.htm
        >> Post: mailto:QRP-L@...
        >
        > ______________________________________________________________
        > QRP-L mailing list
        > Home: http://mailman.qth.net/mailman/listinfo/qrp-l
        > Help: http://mailman.qth.net/mmfaq.htm
        > Post: mailto:QRP-L@...
        >
        >
        > ------------------------------------------------------------------------
        >
        > No virus found in this incoming message.
        > Checked by AVG Free Edition.
        > Version: 7.1.394 / Virus Database: 268.10.5/406 - Release Date: 8/2/2006
      • KD5NWA
        Be aware that $2.64 is just the price of the part, there is also mailing cost and the shipping charge for ordering the parts that will be split by everyone.
        Message 3 of 4 , Aug 4, 2006
        • 0 Attachment
          Be aware that $2.64 is just the price of the part, there is also mailing
          cost and the shipping charge for ordering the parts that will be split by
          everyone.


          On Friday 04 August 2006 13:32, Ben Hall wrote:
          > Hi Cecil,
          >
          > I'd be in for 4 of them at the $2.64 price...
          >
          > thanks and 73,
          > ben, KD5BYB
          >
          > KD5NWA wrote:
          > > Mini-Circuits makes a SMT signal splitter that is quite useful for use
          > > in SDR radios or in transmitters. I'm thinking of buying some of these
          > > devices from Mini-Circuits and thought if others were interested to the
          > > point where we could make the 25 unit pricing we could save a lot of
          > > money. The unit price is $15.10 but at the 25 quantity order the part
          > > cost $2.64 each. The part is rated 5MHz to 1 GHz with very flat
          > > response in the whole range.
          > >
          > > The device specs are listed below, I'm looking at the SBTC-2-10L+
          > > device for
          > > the buy.
          > >
          > > <http://www.minicircuits.com/SBTC-2-10_10L.pdf
          > > <http://www.minicircuits.com/SBTC-2-10_10L.pdf> >
          > >
          > > I would sell these at Cost+Shipping+PayPal fees+ Mailing fees, I will
          > > make nothing on the deal but then I don't want to loose anything
          > > either.
          > >
          > > Shipping cost will be determined by the number of parts ordered.
          > > Mailing fees will be the cost of a padded envelope + stamp cost,
          > > Internaltional orders are $.90 + the cost of a padded envelope.
          > >
          > > If interested let me know how may you are interested in, and if we get
          > > a sufficient desired quantity I can make a descision to make the buy.
          > >
          > > Thanks
          > >
          > > --
          > >
          > > Cecil
          > > KD5NWA
          > > www.qrpradio.com www.hpsdr.com
          > >
          > > "Life is short and I'm too busy tipping Sacred Cows." Don Seglio Batuna
          > >
          > >
          > > -----------------------------------------------------------------------
          > >-
          > >
          > > Subject:
          > > Re: [QRP-L] Surface Mount Power Splitter Wanted
          > > From:
          > > Ceciliio A Bayona <kd5nwa@...>
          > > Date:
          > > Thu, 3 Aug 2006 07:06:54 -0500
          > > To:
          > > Leon Heller <leon.heller@...>
          > >
          > > To:
          > > Leon Heller <leon.heller@...>
          > > CC:
          > > qrp-l@...
          > >
          > >
          > > $1.69 is the 1000 price, a more realistic price is $2.64 for qty 25 of
          > > the "L" part.
          > >
          > > I would be interested in a couple of these things also, I will think
          > > about it and by this weekend decide if I want to make a group purchase
          > > on the item.
          > >
          > > I'll figure the cost and see if there is enough interest in some of the
          > > SDR list, and I will post back after a decision is made. I will looking
          > > at the SBCT-2-10L+ for the buy.
          > >
          > > I would sell these if I do at Cost+Shipping+PayPal fees, I will make
          > > nothing on the deal but then I don't want to loose anything either.
          > >
          > > Thanks
          > >
          > > On Aug 3, 2006, at 2:07 AM, Leon Heller wrote:
          > >> ----- Original Message ----- From: "Kurt Loken" <ae6uj@...>
          > >> To: <qrp-l@...>
          > >> Sent: Thursday, August 03, 2006 5:10 AM
          > >> Subject: [QRP-L] Surface Mount Power Splitter Wanted
          > >>
          > >>
          > >> Hello All,
          > >>
          > >> Any one know where I could buy one of these
          > >> Minicurcuit surface mount power splitters for the
          > >> price on the spec sheet ($1.69)? Looks like they want
          > >> $15 if I try to buy 1.
          > >>
          > >> http://www.minicircuits.com/SBTC-2-10_10L.pdf
          > >>
          > >> The last time I needed a few mixers from MCL I bought 25 pieces to get
          > >> a good price on them, kept some for myself and sold the unwanted ones
          > >> to other hams. I got my mixers for nothing, and the people who bought
          > >> them got them much cheaper than they could get them from the usual
          > >> suppliers.
          > >>
          > >> 73, Leon
          > >> ______________________________________________________________
          > >> QRP-L mailing list
          > >> Home: http://mailman.qth.net/mailman/listinfo/qrp-l
          > >> Help: http://mailman.qth.net/mmfaq.htm
          > >> Post: mailto:QRP-L@...
          > >
          > > ______________________________________________________________
          > > QRP-L mailing list
          > > Home: http://mailman.qth.net/mailman/listinfo/qrp-l
          > > Help: http://mailman.qth.net/mmfaq.htm
          > > Post: mailto:QRP-L@...
          > >
          > >
          > > -----------------------------------------------------------------------
          > >-
          > >
          > > No virus found in this incoming message.
          > > Checked by AVG Free Edition.
          > > Version: 7.1.394 / Virus Database: 268.10.5/406 - Release Date:
          > > 8/2/2006
          >
          > Yahoo! Groups Links
          >
          >
          >

          --

          Cecil
          KD5NWA
          www.qrpradio.com www.hpsdr.com

          "Life is short and I'm too busy tipping Sacred Cows." Don Seglio Batuna
        Your message has been successfully submitted and would be delivered to recipients shortly.