Loading ...
Sorry, an error occurred while loading the content.

Re: RxTx Enseble case drill templates

Expand Messages
  • Philip
    Thanks very much Hugh... You re a star :)
    Message 1 of 2 , Jun 28, 2011
    • 0 Attachment
      Thanks very much Hugh...
      You're a star :)



      --- In softrock40@yahoogroups.com, "Hugh" <hughgibs@...> wrote:
      >
      > Hi All,
      > I have uploaded templates for the holes required for the RxTx Ensemble, for both A4 (8.3 x 11.7 inch) and Letter(8.5 x 11 inch) paper sizes to help drilling your box.
      > Files are:
      > Ensemble case Model A4
      > Ensemble case Mosel Letter
      >
      > I used 10 diameter holes for the 3.5mm plug and you need just over 13mm for the BNC (12mm with extra filing!). The USB square is done by perforaring the box with a line of drill holes, and then connecting. This worked out quite nicely.
      >
      > You of course need to work out how deep etc.. to set the drill template, and of course check your printer is not re-scaling the plot!
      >
      > To double check.. the distance from the edge of the USB square to the BNC center is 105mm
      >
      > I found a Hammond die-cast case - 1590JBK - 145X95X49 Black
      > is an ideal candidate.. the unit fits in nice and snugly, and costs around 15 Dollars, but there are of course alternatives, Happy drilling!
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.