Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Progress??

Expand Messages
  • Alan
    ... From: Garey Barrell Subject: [softrock40] Progress?? ... The most sensitive setting is -10dBV ...
    Message 1 of 37 , Feb 1, 2011
    • 0 Attachment
      ----- Original Message -----
      From: "Garey Barrell
      Subject: [softrock40] Progress??


      > OK. I increased the level to +4 dBm,

      The most sensitive setting is -10dBV

      >
      > Of course by resetting the Si-570 under CFGSR I lost what frequency
      > accuracy I may have had. PSDR 2.0 is still not controlling the Si-570
      > at all. I can't seem to get it calibrated in SR40 for some reason.

      http://sites.google.com/site/g4zfqradio/calibrating-the-softrock-si570-usb-controller

      73 Alan G4ZFQ
    • Alan
      ... From: Subject: Re: [softrock40] Adjust level in Soft Rock light. ... In my experience you should not use the mixer. In my system it introduces phase shift
      Message 37 of 37 , Feb 6, 2011
      • 0 Attachment
        ----- Original Message -----
        From:
        Subject: Re: [softrock40] Adjust level in Soft Rock light.


        >OK I finally got a chance to play again and found the Delta 44 panel. The
        >inputs were all the way to the bottom. -144, I raised them to the top of
        >the green -13 on the Delta 44 panel and will see how it runs.


        In my experience you should not use the mixer.
        In my system it introduces phase shift under certain settings.
        Just use the default setting in the Patchbay/Router.
        Just use the presets.

        73 Alan G4ZFQ
      Your message has been successfully submitted and would be delivered to recipients shortly.