Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Re: OK, I give up.....

Expand Messages
  • Alan
    ... From: Preston Douglas Subject: Re: [softrock40] Re: OK, I give up..... ... Except noise and possibly other signals. 73 Alan G4ZFQ
    Message 1 of 37 , Feb 1, 2011
    • 0 Attachment
      ----- Original Message -----
      From: "Preston Douglas"
      Subject: Re: [softrock40] Re: OK, I give up.....


      >If your freq is off by even as little as 200 Hz you will see nothing.

      Except noise and possibly other signals.

      73 Alan G4ZFQ
    • Alan
      ... From: Subject: Re: [softrock40] Adjust level in Soft Rock light. ... In my experience you should not use the mixer. In my system it introduces phase shift
      Message 37 of 37 , Feb 6, 2011
      • 0 Attachment
        ----- Original Message -----
        From:
        Subject: Re: [softrock40] Adjust level in Soft Rock light.


        >OK I finally got a chance to play again and found the Delta 44 panel. The
        >inputs were all the way to the bottom. -144, I raised them to the top of
        >the green -13 on the Delta 44 panel and will see how it runs.


        In my experience you should not use the mixer.
        In my system it introduces phase shift under certain settings.
        Just use the default setting in the Patchbay/Router.
        Just use the presets.

        73 Alan G4ZFQ
      Your message has been successfully submitted and would be delivered to recipients shortly.