Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] phase noise

Expand Messages
  • Jim Miller
    i think the conspiracists are on shakey ground. couldn t resist... back to my cypress fx2lp datasheet... 73 jim ab3cv ... From: To:
    Message 1 of 21 , Jun 1, 2006
    • 0 Attachment
      i think the conspiracists are on "shakey" ground.

      couldn't resist...

      back to my cypress fx2lp datasheet...

      73

      jim ab3cv
      ----- Original Message -----
      From: <riese-k3djc@...>
      To: <softrock40@yahoogroups.com>
      Sent: Thursday, June 01, 2006 3:28 PM
      Subject: Re: [softrock40] phase noise


      right wing conspiracy

      K3DJC
      On Thu, 01 Jun 2006 13:17:23 -0500 KD5NWA <KD5NWA@...> writes:
      > According to some, phase noise and jitter is a vast conspiracy.
      >
      > At 11:49 AM 6/1/2006, Bill Dumke wrote:
      > >Francis,
      > >
      > >Thank you for posting that. Personally, I believe that is the
      > biggest
      > >single problem with these SDR type radios.
      > >
      > >Bill WB5TCO
      > >
      > >FRANCIS CARCIA wrote:
      > >
      > > > I just found a good article on measuring phase noise. I have
      > used the
      > > > one with a mixer and HP8640B. It is uploaded into the file area.
      > gfz
      > > >
      > > >
      > > > SPONSORED LINKS
      > > > Ham radio
      > > >
      > >
      >
      <http://groups.yahoo.com/gads?t=ms&k=Ham+radio&w1=Ham+radio&c=1&s=15&.sig
      =t8IpznzYq-E2LbCrDXaGPQ>
      >
      > >
      > > >
      > > >
      > > >
      > > >
      >
      ------------------------------------------------------------------------
      > > > YAHOO! GROUPS LINKS
      > > >
      > > > * Visit your group "softrock40
      > > > <http://groups.yahoo.com/group/softrock40>" on the web.
      > > >
      > > > * To unsubscribe from this group, send an email to:
      > > > softrock40-unsubscribe@yahoogroups.com
      > > >
      > <mailto:softrock40-unsubscribe@yahoogroups.com?subject=Unsubscribe>
      > > >
      > > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms
      > of
      > > > Service <http://docs.yahoo.com/info/terms/>.
      > > >
      > > >
      > > >
      >
      ------------------------------------------------------------------------
      > > >
      > >
      > >
      > >
      > >
      > >Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
      >
      > Cecil Bayona
      > KD5NWA
      > www.qrpradio.com
      >
      > "Windows, the most successful software virus ever" Don Seglio Batuna
      >
      >
      >
      >
      >
      > ------------------------ Yahoo! Groups Sponsor
      > --------------------~-->
      > You can search right from your browser? It's easy and it's free.
      > See how.
      > http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/b9A1lB/TM
      > --------------------------------------------------------------------~->

      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      >
      >
      >




      Yahoo! Groups Links
    • FRANCIS CARCIA
      I got similar numbers with my homebrew running about 500 hz. bw. Rob Campbell wrote: I managed to get a couple of hours after work today so
      Message 2 of 21 , Jun 1, 2006
      • 0 Attachment
        I got similar numbers with my homebrew running about 500 hz. bw.

        Rob Campbell <gm6oqn@...> wrote:
        I managed to get a couple of hours after work today so here are the
        results of my testing so far:

        Signal (dBm)   Winrad display (dB)   Comment
        ------------   -------------------   -------
        -32             0                    multiple harmonics visible
        -32.2          -2                    S8
        -40            -5                    S7
        -50            -15                   S6
        -60            -25                   S5
        -70            -35                   S4
        -80            -45                   S3
        -90            -55                   S2
        -100           -65                   S1/S2
        -110           -75                   S1
        -120           -85                   <S1
        -130           -95                   see note 1 below
        -134           -**                   see note 2
        -135           -**                   see note 3

        Notes
        -----
        1. It was difficult to see any signal over the noise on the Spectrum
        display but the trace on the Waterfall was still distinct.
        2. No visible signal on the Spectrum, Waterfall becoming indistinct.
        3. Last traces of a signal still visible on the Waterfall.
        4. All measurements taken with an unmodulated carrier at 7.046MHz.
        5. Soundcard was a Crystal Fusion AC97 on the motherboard.
        6. Noise with no signal applied sits about the -100dB mark.
        7. Below -130dBm in it was hard to make out any audible tone but the
        waterfall display was still usable (probably only for slow morse).

        No measurements taken with Rocky yet but subjectively it looks
        pretty good. After doing a sweep with the signal generator (50 1kHz
        steps pausing for 1s at each step) to set the balance, image
        rejection is about 80dB.

        Hope this is useful.

        Rob, GM6OQN

        --- In softrock40@yahoogroups.com, "Rob Campbell" <gm6oqn@...> wrote:
        > --- In softrock40@yahoogroups.com, Bill Dumke <billd@> wrote:
        > >
        > > Rob,
        > >
        > > It would be interesting if you could use your signal generator
        to
        > make a
        > > standardized measurement of MDS looking for 3 dB (S+N)/N, then
        > noting
        > > the level you have going in from the generator.  This will give
        > the
        > > noise floor of the SoftRock.
        > >
        > > Bill, WB5TCO
        > >






      • FRANCIS CARCIA
        Nigel, I sent the daVinci code to the wrong place please send me a pm and I will try again. I deleted you mail so lost the address. frank Ford Peterson
        Message 3 of 21 , Jun 1, 2006
        • 0 Attachment
          Nigel,
          I sent the daVinci code to the wrong place please send me a pm and I will try again.
          I deleted you mail so lost the address. frank

          Ford Peterson <ford@...> wrote:
          Bill wrote:

          > Francis,
          >
          > Thank you for posting that. Personally, I believe that is the biggest
          > single problem with these SDR type radios.
          >
          > Bill WB5TCO

          "that is" being phase noise of course.

          Actually, your comment is true, but not because of the "SDR type radios." These extremely simple receiver mixers are simply responding to the simply aweful Local Oscillators (by modern standards)that many of us are using to run the SR series mixers. Garbage-in / garbage-out as they say.

          My personal view is that there is likely no substitute for the multi-conversion receiver. We have become accustomed to enjoying the ability to QSY from the AM broadcast band up to 440MHz (and higher) with the touch of a button on most modern radios. I can see using an SDR type of mixer to acquire base-band data, and replace a large segment of a traditional radio using the sound card. But performance will be lack-luster at best when you QSY to any upper band without first performing a block-conversion of that band using traditional mixers and LOs. There is likely no substitute for traditional block conversion down to a reasonable frequency for the SDR to deal with. If you want real performance, then the focus of attention should be on the LO. Clean, frequency agile, spurious free, low-phase noise LOs is the name of the game. Use these nifty detectors as the final conversion from a relatively low frequency IF to your ears--and make that LO pristine clean of course.

          Ford-N0FP
          ford@...




          ------------------------ Yahoo! Groups Sponsor --------------------~-->
          Protect your PC from spy ware with award winning anti spy technology. It's free.
          http://us.click.yahoo.com/97bhrC/LGxNAA/yQLSAA/b9A1lB/TM
          --------------------------------------------------------------------~->


          Yahoo! Groups Links

          <*> To visit your group on the web, go to:
          http://groups.yahoo.com/group/softrock40/

          <*> To unsubscribe from this group, send an email to:
          softrock40-unsubscribe@yahoogroups.com

          <*> Your use of Yahoo! Groups is subject to:
          http://docs.yahoo.com/info/terms/





        • Alberto I2PHD
          ... Something went in saturation above -40 dBm....probably the opamps or the sound card. 73 Alberto I2PHD
          Message 4 of 21 , Jun 1, 2006
          • 0 Attachment
            > Signal (dBm) Winrad display (dB) Comment
            > ------------ ------------------- -------
            > -32 0 multiple harmonics visible
            > -32.2 -2 S8
            > -40 -5 S7
            > -50 -15 S6
            > -60 -25 S5
            ---- snip ----

            Something went in saturation above -40 dBm....probably the opamps or the sound card.

            73 Alberto I2PHD
          • Bill Tracey
            Probably the sound card started saturating above -40 dbm -- the SR 6 hardware I ve measured will produce a 4.5Vpp signal with a -18 dbm input signal on 7 MHz.
            Message 5 of 21 , Jun 1, 2006
            • 0 Attachment
              Probably the sound card started saturating above -40 dbm -- the SR 6
              hardware I've measured will produce a 4.5Vpp signal with a -18 dbm input
              signal on 7 MHz. Suspect the sound card saturates long before that.

              Cheers,

              Bill (kd5tfd)

              At 06:48 PM 6/1/2006, Alberto I2PHD wrote:
              > > Signal (dBm) Winrad display (dB) Comment
              > > ------------ ------------------- -------
              > > -32 0 multiple harmonics visible
              > > -32.2 -2 S8
              > > -40 -5 S7
              > > -50 -15 S6
              > > -60 -25 S5
              >---- snip ----
              >
              >Something went in saturation above -40 dBm....probably the opamps or the
              >sound card.
              >
              >73 Alberto I2PHD
            • FRANCIS CARCIA
              That is what I found. The OP amp gain jacks the signal to sound card saturation. Bill Tracey wrote: Probably the sound card started
              Message 6 of 21 , Jun 1, 2006
              • 0 Attachment
                That is what I found. The OP amp gain jacks the signal to sound card saturation.

                Bill Tracey <kd5tfd@...> wrote:
                Probably the sound card started saturating above -40 dbm -- the SR 6
                hardware I've measured will produce a 4.5Vpp signal with a -18 dbm input
                signal  on 7 MHz.  Suspect the sound card saturates long before that.

                Cheers,

                Bill (kd5tfd)

                At 06:48 PM 6/1/2006, Alberto I2PHD wrote:
                > > Signal (dBm)   Winrad display (dB)   Comment
                > > ------------   -------------------   -------
                > > -32             0                    multiple harmonics visible
                > > -32.2          -2                    S8
                > > -40            -5                    S7
                > > -50            -15                   S6
                > > -60            -25                   S5
                >---- snip ----
                >
                >Something went in saturation above -40 dBm....probably the opamps or the
                >sound card.
                >
                >73  Alberto  I2PHD




                SPONSORED LINKS
                Ham radio

              • Sparkes, John
                Well, according to ONE, anyway...!________________________________From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of KD5NWA
                Message 7 of 21 , Jun 1, 2006
                • 0 Attachment
                  Well, according to ONE, anyway...!


                  From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of KD5NWA
                  Sent: Friday, 2 June 2006 02:17
                  To: softrock40@yahoogroups.com
                  Cc: softrock40@yahoogroups.com
                  Subject: Re: [softrock40] phase noise

                  According to some, phase noise and jitter is a vast conspiracy.

                  At 11:49 AM 6/1/2006, Bill Dumke wrote:
                  >Francis,
                  >
                  >Thank you for posting that. 
                  Personally, I believe that is the biggest
                  >single problem with these SDR
                  type radios.
                  >
                  >Bill  WB5TCO
                  >
                  >FRANCIS CARCIA
                  wrote:
                  >
                  > > I just found a good article on measuring phase
                  noise. I have used the
                  > > one with a mixer and HP8640B. It is uploaded
                  into the file area.  gfz
                  > >
                  > >
                  > > SPONSORED
                  LINKS
                  > > Ham radio
                  > >
                  > <
                  href="http://groups.yahoo.com/gads?t=ms&k=Ham+radio&w1=Ham+radio&c=1&s=15&.sig=t8IpznzYq-E2LbCrDXaGPQ">http://groups.yahoo.com/gads?t=ms&k=Ham+radio&w1=Ham+radio&c=1&s=15&.sig=t8IpznzYq-E2LbCrDXaGPQ>
                  >
                  > >
                  > >
                  > >
                  > >
                  ------------------------------------------------------------------------
                  > > YAHOO! GROUPS LINKS
                  > >
                  > >    
                  *  Visit your group "softrock40
                  > >       <
                  href="http://groups.yahoo.com/group/softrock40">http://groups.yahoo.com/group/softrock40>" on the web.
                  > >
                  > >     *  To
                  unsubscribe from this group, send an email to:
                  > >       
                  softrock40-unsubscribe@yahoogroups.com
                  > >      
                  <mailto:softrock40-unsubscribe@yahoogroups.com?subject=Unsubscribe>
                  > >
                  > >     *  Your use of Yahoo! Groups is
                  subject to the Yahoo! Terms of
                  > >      
                  Service <http://docs.yahoo.com/info/terms/>.
                  > >
                  > >
                  > >
                  ------------------------------------------------------------------------
                  > >
                  >
                  >
                  >
                  >
                  >Yahoo! Groups
                  Links
                  >
                  >
                  >
                  >


                  Cecil Bayona
                  KD5NWA
                  www.qrpradio.com

                  "Windows, the most successful software virus ever" Don Seglio Batuna


                  This message and any attached files may contain information that is confidential and/or subject of legal privilege intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error and that any dissemination, copying or use of this message or attachment is strictly forbidden, as is the disclosure of the information therein. If you have received this message in error please notify the sender immediately and delete the message.
                • Robert Campbell
                  Thanks, guys. Looks like the perfomance is OK and I haven t messed up in construction. I figured the harmonics were down to overdriving the soundcard input.
                  Message 8 of 21 , Jun 2, 2006
                  • 0 Attachment
                    Thanks, guys.

                    Looks like the perfomance is OK and I haven't messed
                    up in construction. I figured the harmonics were down
                    to overdriving the soundcard input.

                    Just need to see what it does with an antenna now :-)

                    Rob GM6OQN

                    --- FRANCIS CARCIA <carcia@...> wrote:

                    > That is what I found. The OP amp gain jacks the
                    > signal to sound card saturation.
                    >
                    > Bill Tracey <kd5tfd@...> wrote: Probably the
                    > sound card started saturating above -40 dbm -- the
                    > SR 6
                    > hardware I've measured will produce a 4.5Vpp signal
                    > with a -18 dbm input
                    > signal on 7 MHz. Suspect the sound card saturates
                    > long before that.
                    >
                    > Cheers,
                    >
                    > Bill (kd5tfd)
                    >
                    > At 06:48 PM 6/1/2006, Alberto I2PHD wrote:
                    > > > Signal (dBm) Winrad display (dB) Comment
                    > > > ------------ ------------------- -------
                    > > > -32 0 multiple
                    > harmonics visible
                    > > > -32.2 -2 S8
                    > > > -40 -5 S7
                    > > > -50 -15 S6
                    > > > -60 -25 S5
                    > >---- snip ----
                    > >
                    > >Something went in saturation above -40
                    > dBm....probably the opamps or the
                    > >sound card.
                    > >
                    > >73 Alberto I2PHD
                    >
                    >
                    >
                    >
                    > SPONSORED LINKS
                    > Ham radio
                    >
                    > ---------------------------------
                    > YAHOO! GROUPS LINKS
                    >
                    >
                    > Visit your group "softrock40" on the web.
                    >
                    > To unsubscribe from this group, send an email
                    > to:
                    > softrock40-unsubscribe@yahoogroups.com
                    >
                    > Your use of Yahoo! Groups is subject to the
                    > Yahoo! Terms of Service.
                    >
                    >
                    > ---------------------------------
                    >
                    >
                    >
                    >






                    ___________________________________________________________
                    All new Yahoo! Mail "The new Interface is stunning in its simplicity and ease of use." - PC Magazine
                    http://uk.docs.yahoo.com/nowyoucan.html
                  Your message has been successfully submitted and would be delivered to recipients shortly.