Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Linux SI570 control...

Expand Messages
  • Sid Boyce
    ... http://groups.yahoo.com/group/softrock40/files/VK6JBL/ Quisk is a python GUI and usbsoftrock is the si570 control software that you can use standalone or
    Message 1 of 9 , Feb 20, 2010
    • 1 Attachment
    • 177 KB
    On 20/02/10 04:36, aa9wqham@... wrote:
    >
    >
    > Hello Everyone
    >
    > I am new to Linux. I but eager to learn. I want to control the SI570
    > with a program. I am using Ubuntu 9.10. What do the Guru's recommend?
    > Hopefully something GUI instead of command line interface but beggers
    > can be choosy. Thanks in advance!
    >
    > Larry W9AMR
    >

    http://groups.yahoo.com/group/softrock40/files/VK6JBL/
    Quisk is a python GUI and usbsoftrock is the si570 control software that
    you can use standalone or via quisk.
    73 ... Sid.
    --
    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
    Specialist, Cricket Coach
    Microsoft Windows Free Zone - Linux used for all Computing Tasks
  • aa9wqham@aol.com
    Thanks Glen. Larry In a message dated 2/20/2010 12:34:06 A.M. Eastern Standard Time, ... with a ... choosy. I use usbsoftrock on Fedora 9 and OSX 11.6 to
    Message 2 of 9 , Feb 20, 2010
    • 0 Attachment
      Thanks Glen.
       
      Larry
       
      In a message dated 2/20/2010 12:34:06 A.M. Eastern Standard Time, goverby@... writes:
       



      --- In softrock40@yahoogro ups.com, aa9wqham@... wrote:

      > I am new to Linux. I but eager to learn. I want to control the SI570 with a
      > program. I am using Ubuntu 9.10. What do the Guru's recommend? Hopefully
      > something GUI instead of command line interface but beggers can be choosy.

      I use usbsoftrock on Fedora 9 and OSX 11.6 to control a USB-Synth, which is the same device as the USB I2C Interface kit.

      Use the usbsoftrock calibrate function to get the correct crystal frequency to use with the -x option.

      Glen, kc0iyt

    • aa9wqham@aol.com
      Thanks Eric. I have a few local hams here that are my guru s. I am just getting started. I have played a little with Linux over the years but want to learn
      Message 3 of 9 , Feb 22, 2010
      • 0 Attachment
         
        Thanks Eric. I have a few local hams here that are my guru's. I am just getting started. I have played a little with Linux over the years but want to learn and do more with it!
         
        Larry W9AMR 
         
        In a message dated 2/22/2010 1:54:57 P.M. Eastern Standard Time, eric@... writes:
         

        Larry,

        If you need a little help getting Quisk set up, check out the following posting:

        http://groups. yahoo.com/ group/softrock40 /message/ 38939

        It should give you an idea of what I had to do to get Quisk running on Ubuntu 9. It works great! I am really loving this new sport...

        I am a bit of a Linux nut -- glad to have found a reasonably easy way to get going on Linux with SoftRock.

        Eric

        --- In softrock40@yahoogro ups.com, aa9wqham@... wrote:
        >
        >
        > Thank you Sid. I will check it out!
        >
        > Larry
        >
        >
        >
        > In a message dated 2/20/2010 7:24:16 P.M. Eastern Standard Time,
        > sboyce@... writes:
        >
        >
        >
        > [_Attachment( s)_ (mip://07830730/ default.html# TopText) from Sid Boyce
        > included below]
        > On 20/02/10 04:36, _aa9wqham@.. ._ (mailto:aa9wqham@ ...) wrote:
        > >
        > >
        > > Hello Everyone
        > >
        > > I am new to Linux. I but eager to learn. I want to control the SI570
        > > with a program. I am using Ubuntu 9.10. What do the Guru's recommend?
        > > Hopefully something GUI instead of command line interface but beggers
        > > can be choosy. Thanks in advance!
        > >
        > > Larry W9AMR
        > >
        >
        > _http://groups. http://grohttp: //groups.<Whttp://groups. _
        > (http://groups. yahoo.com/ group/softrock40 /files/VK6JBL/)
        > Quisk is a python GUI and usbsoftrock is the si570 control software that
        > you can use standalone or via quisk.
        > 73 ... Sid.
        > --
        > Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
        > Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
        > Specialist, Cricket Coach
        > Microsoft Windows Free Zone - Linux used for all Computing Tasks
        >

      • Sid Boyce
        ... Your local guys should be able to assist you with some stuff. There are also distribution forums where a massive amount of help can get had and there is
        Message 4 of 9 , Feb 23, 2010
        • 0 Attachment
          On 23/02/10 03:14, aa9wqham@... wrote:
          >
          >
          > Thanks Eric. I have a few local hams here that are my guru's. I am just
          > getting started. I have played a little with Linux over the years but
          > want to learn and do more with it!
          > Larry W9AMR
          Your local guys should be able to assist you with some stuff. There are
          also distribution forums where a massive amount of help can get had and
          there is also www.google.com/linux. Back when Win95 was the standard for
          PC's I migrated all my home and work stuff to Linux as I could do more
          on Linux, like being able to work seemlessly with multiple sessions to
          partitions on large SPARC systems and mainframes, while the guys using
          Windows or Solaris had to logoff one and logon to another and it also
          allowed me to teach the hardware and software using a real system rather
          than the outdated printed material.
          I used Citrix client for Linux to work with our Windows server based
          apps, Lotus Notes under wine for email, Cisco Linux VPN client to
          connect to our corporate network, X3270 to the mainframes at Corporate
          HQ, StarOffice for word processing, spreadsheets and presentations at a
          time when Linux was a dirty word and when one guy in our Worldwide
          Support Centre told me he installed Linux on his PC at home and wondered
          what you could do with Linux once installed - I pointed to my laptop on
          the desk opposite which I was using to handle problems they escalated to
          me, so the same as he did and more.
          The only time I had problems was in the Madrid, Spain office where
          their network banned logins from other than Windows and I had to use a
          Windows laptop to login to corporate in order to download some files.

          On piece of advice I have always given - Think - Linux is not Windows
          and wake up each day saying "I know jack about Linux", that puts
          preconceived ideas out of your mind and speeds progress. I was having to
          switch mindsets between z/OS, Solaris and Linux most days. Windows?, it
          still puzzles me.
          There is very little that can't be done under Linux.
          73 ... Sid.

          > In a message dated 2/22/2010 1:54:57 P.M. Eastern Standard Time,
          > eric@... writes:
          >
          > Larry,
          >
          > If you need a little help getting Quisk set up, check out the
          > following posting:
          >
          > http://groups.yahoo.com/group/softrock40/message/38939
          > <http://groups.yahoo.com/group/softrock40/message/38939>
          >
          > It should give you an idea of what I had to do to get Quisk running
          > on Ubuntu 9. It works great! I am really loving this new sport...
          >
          > I am a bit of a Linux nut -- glad to have found a reasonably easy
          > way to get going on Linux with SoftRock.
          >
          > Eric
          >
          > --- In softrock40@yahoogroups.com
          > <mailto:softrock40%40yahoogroups.com>, aa9wqham@... wrote:
          > >
          > >
          > > Thank you Sid. I will check it out!
          > >
          > > Larry
          > >
          > >
          > >
          > > In a message dated 2/20/2010 7:24:16 P.M. Eastern Standard Time,
          > > sboyce@... writes:
          > >
          > >
          > >
          > > [_Attachment(s)_ (mip://07830730/default.html#TopText
          > <mip://07830730/default.html#TopText>) from Sid Boyce
          > > included below]
          > > On 20/02/10 04:36, _aa9wqham@..._ (mailto:aa9wqham@...) wrote:
          > > >
          > > >
          > > > Hello Everyone
          > > >
          > > > I am new to Linux. I but eager to learn. I want to control the
          > SI570
          > > > with a program. I am using Ubuntu 9.10. What do the Guru's
          > recommend?
          > > > Hopefully something GUI instead of command line interface but
          > beggers
          > > > can be choosy. Thanks in advance!
          > > >
          > > > Larry W9AMR
          > > >
          > >
          > > _http://groups.http://grohttp://groups.
          > <http://groups.http//grohttp://groups.><Whttp://groups._
          > <whttp://groups._/>
          > > (http://groups.yahoo.com/group/softrock40/files/VK6JBL/
          > <http://groups.yahoo.com/group/softrock40/files/VK6JBL/>)
          > > Quisk is a python GUI and usbsoftrock is the si570 control
          > software that
          > > you can use standalone or via quisk.
          > > 73 ... Sid.
          > > --



          --
          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
          Specialist, Cricket Coach
          Microsoft Windows Free Zone - Linux used for all Computing Tasks
        • n4fbz
          I ll be running my RXTX6.3 under Linux when it s finished, so this information is very useful. I m glad to see others taking up Linux and trying to run SDR
          Message 5 of 9 , Feb 23, 2010
          • 0 Attachment
            I'll be running my RXTX6.3 under Linux when it's finished, so this information is very useful. I'm glad to see others taking up Linux and trying to run SDR under that OS!!!

            However, maybe someone knows of something we can use under Linux (related to this interest group and thread). I and a friend have the QRP2000 Si570 USB Frequency Synthesizer kits (from http://www.sdr-kits.net/). We're looking for something that will EASILY and SIMPLY set the frequency for that kit under Linux (Ubuntu 9.10)- where there is no multiplier (or the multiplier is == 1), and a simple command will change the frequency (in terminal mode- something like "Freq 146.520". We need something simple like this for the experimenting we're doing.

            (usbsoftrock is far far more complex than what we need... and for our applications, probably would not work properly.)

            I will be commanding the Frequency Synthesizer through the R language. That way, I can do analysis on the results fairly easily!!!

            Any suggestions or links to Linux software (simple syntax command line preferred) would be greatly appreciated!!!

            Bob
            N4FBZ



            --- In softrock40@yahoogroups.com, aa9wqham@... wrote:
            >
            >
            > Thanks Eric. I have a few local hams here that are my guru's. I am just
            > getting started. I have played a little with Linux over the years but want to
            > learn and do more with it!
            >
            > Larry W9AMR
            >
            >
            > In a message dated 2/22/2010 1:54:57 P.M. Eastern Standard Time,
            > eric@... writes:
            >
            >
            >
            >
            > Larry,
            >
            > If you need a little help getting Quisk set up, check out the following
            > posting:
            >
            > _http://groups.http://grohttp://groups.<Whttp://grhttp:_
            > (http://groups.yahoo.com/group/softrock40/message/38939)
            >
            > It should give you an idea of what I had to do to get Quisk running on
            > Ubuntu 9. It works great! I am really loving this new sport...
            >
            > I am a bit of a Linux nut -- glad to have found a reasonably easy way to
            > get going on Linux with SoftRock.
            >
            > Eric
            >
            > --- In _softrock40@yahoogrosoftroc_ (mailto:softrock40@yahoogroups.com) ,
            > aa9wqham@ wrote:
            > >
            > >
            > > Thank you Sid. I will check it out!
            > >
            > > Larry
            > >
            > >
            > >
            > > In a message dated 2/20/2010 7:24:16 P.M. Eastern Standard Time,
            > > sboyce@ writes:
            > >
            > >
            > >
            > > [_Attachment( [_At_mip://07830730/mip://0783073mip://0_
            > (mip://07830730/default.html#TopText) ) from Sid Boyce
            > > included below]
            > > On 20/02/10 04:36, _aa9wqham@ On 20/02/10 04:36, On 20/02/1
            > > >
            > > >
            > > > Hello Everyone
            > > >
            > > > I am new to Linux. I but eager to learn. I want to control the SI570
            > > > with a program. I am using Ubuntu 9.10. What do the Guru's recommend?
            > > > Hopefully something GUI instead of command line interface but beggers
            > > > can be choosy. Thanks in advance!
            > > >
            > > > Larry W9AMR
            > > >
            > >
            > > __http://groups.http://groups.http://gr_
            > (http://groups.http//grohttp://groups.) <_Whttp://groups.W_ (whttp://groups._/)
            > > (_http://groups.http://grohttp://groups.<Whttp://groups._
            > (http://groups.yahoo.com/group/softrock40/files/VK6JBL/) )
            > > Quisk is a python GUI and usbsoftrock is the si570 control software that
            > > you can use standalone or via quisk.
            > > 73 ... Sid.
            > > --
            > > Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
            > > Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            > > Specialist, Cricket Coach
            > > Microsoft Windows Free Zone - Linux used for all Computing Tasks
            > >
            >
          • Sid Boyce
            ... No problem, you don t have to use usbsoftrock with quisk unless you are using the ATTiny or UBW to control the si570. I use a DPDT switch so I can use
            Message 6 of 9 , Feb 24, 2010
            • 0 Attachment
              On 24/02/10 05:34, n4fbz wrote:
              >
              >
              > I'll be running my RXTX6.3 under Linux when it's finished, so this
              > information is very useful. I'm glad to see others taking up Linux and
              > trying to run SDR under that OS!!!
              >
              > However, maybe someone knows of something we can use under Linux
              > (related to this interest group and thread). I and a friend have the
              > QRP2000 Si570 USB Frequency Synthesizer kits (from
              > http://www.sdr-kits.net/ <http://www.sdr-kits.net/>). We're looking for
              > something that will EASILY and SIMPLY set the frequency for that kit
              > under Linux (Ubuntu 9.10)- where there is no multiplier (or the
              > multiplier is == 1), and a simple command will change the frequency (in
              > terminal mode- something like "Freq 146.520". We need something simple
              > like this for the experimenting we're doing.
              >
              > (usbsoftrock is far far more complex than what we need... and for our
              > applications, probably would not work properly.)
              >
              > I will be commanding the Frequency Synthesizer through the R language.
              > That way, I can do analysis on the results fairly easily!!!
              >

              > Any suggestions or links to Linux software (simple syntax command line
              > preferred) would be greatly appreciated!!!
              >
              > Bob
              > N4FBZ
              >
              No problem, you don't have to use usbsoftrock with quisk unless you are
              using the ATTiny or UBW to control the si570.
              I use a DPDT switch so I can use either the UBW under usbsoftrock or use
              K5BCQ's si570 Controller which acts like an old style knob and dial with
              LCD frequency readout and also does the automatic band changing on the
              Mobo v3.6. As a matter of fact I use the same script for quisk for both,
              except I set and read the frequency from the si570 Controller when it is
              switched to the si570.
              You could comment out these lines in the file so usbsoftrock doesn't get
              started.
              # grep usbsoftrock /opt/quisk-3.3.0/quisk_hardware_vk6jbl.py
              command = "usbsoftrock -a -d"
              self.usbsoftrock_pid = os.spawnlp(os.P_NOWAIT, "usbsoftrock",
              "usbsoftrock", "-a", "-d", "-m 4")
              print 'usbsoftrock pid = %d' % self.usbsoftrock_pid
              73 ... Sid.


              > --- In softrock40@yahoogroups.com <mailto:softrock40%40yahoogroups.com>,
              > aa9wqham@... wrote:
              > >
              > >
              > > Thanks Eric. I have a few local hams here that are my guru's. I am just
              > > getting started. I have played a little with Linux over the years but
              > want to
              > > learn and do more with it!
              > >
              > > Larry W9AMR
              > >
              > >
              > > In a message dated 2/22/2010 1:54:57 P.M. Eastern Standard Time,
              > > eric@... writes:
              > >
              > >
              > >
              > >
              > > Larry,
              > >
              > > If you need a little help getting Quisk set up, check out the following
              > > posting:
              > >
              > > _http://groups.http://grohttp://groups.
              > <http://groups.http://grohttp://groups.><Whttp://grhttp:_
              > <Whttp://grhttp:_>
              > > (http://groups.yahoo.com/group/softrock40/message/38939
              > <http://groups.yahoo.com/group/softrock40/message/38939>)
              > >
              > > It should give you an idea of what I had to do to get Quisk running on
              > > Ubuntu 9. It works great! I am really loving this new sport...
              > >
              > > I am a bit of a Linux nut -- glad to have found a reasonably easy way to
              > > get going on Linux with SoftRock.
              > >
              > > Eric
              > >
              > > --- In _softrock40@yahoogrosoftroc_
              > (mailto:softrock40@yahoogroups.com <mailto:softrock40%40yahoogroups.com>) ,
              > > aa9wqham@ wrote:
              > > >
              > > >
              > > > Thank you Sid. I will check it out!
              > > >
              > > > Larry
              > > >
              > > >
              > > >
              > > > In a message dated 2/20/2010 7:24:16 P.M. Eastern Standard Time,
              > > > sboyce@ writes:
              > > >
              > > >
              > > >
              > > > [_Attachment( [_At_mip://07830730/mip://0783073mip://0_
              > <mip://07830730/mip://0783073mip://0_>
              > > (mip://07830730/default.html#TopText
              > <mip://07830730/default.html#TopText>) ) from Sid Boyce
              > > > included below]
              > > > On 20/02/10 04:36, _aa9wqham@ On 20/02/10 04:36, On 20/02/1
              > > > >
              > > > >
              > > > > Hello Everyone
              > > > >
              > > > > I am new to Linux. I but eager to learn. I want to control the SI570
              > > > > with a program. I am using Ubuntu 9.10. What do the Guru's recommend?
              > > > > Hopefully something GUI instead of command line interface but beggers
              > > > > can be choosy. Thanks in advance!
              > > > >
              > > > > Larry W9AMR
              > > > >

              --
              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
              Specialist, Cricket Coach
              Microsoft Windows Free Zone - Linux used for all Computing Tasks
            • n4fbz
              Uhhh... I m asking about something else to run the QRP2000 Si570 USB Frequency Synthesizer that doesn t have all the extra code connected with usbsoftrock, not
              Message 7 of 9 , Feb 24, 2010
              • 0 Attachment
                Uhhh...

                I'm asking about something else to run the QRP2000 Si570 USB Frequency Synthesizer that doesn't have all the extra code connected with usbsoftrock, not about running the RXTX board without USB control.

                I just need something that through a command line in Linux will set the frequency (and I don't need multipliers- or have a default multiplier of 1). It needs to be a single simple command, like "Freq 146.52". The extra commands/settings/size of usbsoftrock makes it too unwieldy for our application... we just need one simple piece of code/a single simple command

                (I don't even need to "read" the frequency, just set it. I can use usbsoftrock to do anything special, but I will be using that command in a module- which will be used in a loop to gather data under R.)

                I asked the question in this thread, because it seemed to be related to the topic and not outside the bounds of this group... (and I don't think there is a separate group for the Freq synthesizer- some websites I've visited linked to THIS group for information!)


                When I get my RXTX6.3 finished, I will also have the I2C kit installed, and be operating using that, so THEN I will be using usbsoftrock (or whatever is good and easy/adequate for what I want to do).

                Thanks if you can help...

                Bob
                N4FBZ



                --- In softrock40@yahoogroups.com, Sid Boyce <sboyce@...> wrote:
                >
                > On 24/02/10 05:34, n4fbz wrote:
                > >
                > >
                > > I'll be running my RXTX6.3 under Linux when it's finished, so this
                > > information is very useful. I'm glad to see others taking up Linux and
                > > trying to run SDR under that OS!!!
                > >
                > > However, maybe someone knows of something we can use under Linux
                > > (related to this interest group and thread). I and a friend have the
                > > QRP2000 Si570 USB Frequency Synthesizer kits (from
                > > http://www.sdr-kits.net/ <http://www.sdr-kits.net/>). We're looking for
                > > something that will EASILY and SIMPLY set the frequency for that kit
                > > under Linux (Ubuntu 9.10)- where there is no multiplier (or the
                > > multiplier is == 1), and a simple command will change the frequency (in
                > > terminal mode- something like "Freq 146.520". We need something simple
                > > like this for the experimenting we're doing.
                > >
                > > (usbsoftrock is far far more complex than what we need... and for our
                > > applications, probably would not work properly.)
                > >
                > > I will be commanding the Frequency Synthesizer through the R language.
                > > That way, I can do analysis on the results fairly easily!!!
                > >
                >
                > > Any suggestions or links to Linux software (simple syntax command line
                > > preferred) would be greatly appreciated!!!
                > >
                > > Bob
                > > N4FBZ
                > >
                > No problem, you don't have to use usbsoftrock with quisk unless you are
                > using the ATTiny or UBW to control the si570.
                > I use a DPDT switch so I can use either the UBW under usbsoftrock or use
                > K5BCQ's si570 Controller which acts like an old style knob and dial with
                > LCD frequency readout and also does the automatic band changing on the
                > Mobo v3.6. As a matter of fact I use the same script for quisk for both,
                > except I set and read the frequency from the si570 Controller when it is
                > switched to the si570.
                > You could comment out these lines in the file so usbsoftrock doesn't get
                > started.
                > # grep usbsoftrock /opt/quisk-3.3.0/quisk_hardware_vk6jbl.py
                > command = "usbsoftrock -a -d"
                > self.usbsoftrock_pid = os.spawnlp(os.P_NOWAIT, "usbsoftrock",
                > "usbsoftrock", "-a", "-d", "-m 4")
                > print 'usbsoftrock pid = %d' % self.usbsoftrock_pid
                > 73 ... Sid.
                >
                >
                > > --- In softrock40@yahoogroups.com <mailto:softrock40%40yahoogroups.com>,
                > > aa9wqham@ wrote:
                > > >
                > > >
                > > > Thanks Eric. I have a few local hams here that are my guru's. I am just
                > > > getting started. I have played a little with Linux over the years but
                > > want to
                > > > learn and do more with it!
                > > >
                > > > Larry W9AMR
                > > >
                > > >
                > > > In a message dated 2/22/2010 1:54:57 P.M. Eastern Standard Time,
                > > > eric@ writes:
                > > >
                > > >
                > > >
                > > >
                > > > Larry,
                > > >
                > > > If you need a little help getting Quisk set up, check out the following
                > > > posting:
                > > >
                > > > _http://groups.http://grohttp://groups.
                > > <http://groups.http://grohttp://groups.><Whttp://grhttp:_
                > > <Whttp://grhttp:_>
                > > > (http://groups.yahoo.com/group/softrock40/message/38939
                > > <http://groups.yahoo.com/group/softrock40/message/38939>)
                > > >
                > > > It should give you an idea of what I had to do to get Quisk running on
                > > > Ubuntu 9. It works great! I am really loving this new sport...
                > > >
                > > > I am a bit of a Linux nut -- glad to have found a reasonably easy way to
                > > > get going on Linux with SoftRock.
                > > >
                > > > Eric
                > > >
                > > > --- In _softrock40@yahoogrosoftroc_
                > > (mailto:softrock40@yahoogroups.com <mailto:softrock40%40yahoogroups.com>) ,
                > > > aa9wqham@ wrote:
                > > > >
                > > > >
                > > > > Thank you Sid. I will check it out!
                > > > >
                > > > > Larry
                > > > >
                > > > >
                > > > >
                > > > > In a message dated 2/20/2010 7:24:16 P.M. Eastern Standard Time,
                > > > > sboyce@ writes:
                > > > >
                > > > >
                > > > >
                > > > > [_Attachment( [_At_mip://07830730/mip://0783073mip://0_
                > > <mip://07830730/mip://0783073mip://0_>
                > > > (mip://07830730/default.html#TopText
                > > <mip://07830730/default.html#TopText>) ) from Sid Boyce
                > > > > included below]
                > > > > On 20/02/10 04:36, _aa9wqham@ On 20/02/10 04:36, On 20/02/1
                > > > > >
                > > > > >
                > > > > > Hello Everyone
                > > > > >
                > > > > > I am new to Linux. I but eager to learn. I want to control the SI570
                > > > > > with a program. I am using Ubuntu 9.10. What do the Guru's recommend?
                > > > > > Hopefully something GUI instead of command line interface but beggers
                > > > > > can be choosy. Thanks in advance!
                > > > > >
                > > > > > Larry W9AMR
                > > > > >
                >
                > --
                > Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                > Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                > Specialist, Cricket Coach
                > Microsoft Windows Free Zone - Linux used for all Computing Tasks
                >
              Your message has been successfully submitted and would be delivered to recipients shortly.