RE: [softrock40] Re: V9 w/ ATTiny85 and HF BPF and Rocky
- View Source
Hi Ron, have a look on eBay:
73 de Frank PH2M
So is anyone selling ATTiny85’s with PE0FKO’s software already burned?
Sadly, you are correct, that is one of the limitations of the v2.0 firmware. The QRP2000 guys were expecting (hoping)? Alex would produce a new version of Rocky to provide BPF switching support for it.
The best solution, as said many times before, is to change to Fred PE0FKO's version v15.10 firmware, not only does that provide full support for Rocky 3.6, but all other main SDR programs and the 'band switching' and 'smooth tuning' functions are implemented in the firmware.
As the v15.10 firmware enables the v9.0 to work completely with Rocky v3.6, there really is no reason for Alex to bother to change his program.
73, Bob G8VOI
--- In firstname.lastname@example.org, "Ronald Wagner" <rcwagner@...> wrote:
> So I should NOT expect Rocky to change the filters on the HF BPF even if I
> have the new ATTiny85 from Tony. Is that correct? Is there some condition
> to make Rocky set the filters correctly?
> I have J3 on the V9 board tied to pin 1's of JP1 and JP2 of the HF BPF
> (pin 1 of J3 goes to JP1), but those two pins are always low.
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.35/2034 - Release Date: 04/01/09 06:06:00