Loading ...
Sorry, an error occurred while loading the content.

72224Re: [softrock40] USB recognition

Expand Messages
  • false
    Feb 12, 2013
    • 0 Attachment
      i had the same problem so i pulled up the USB for the rx/tx cleaned it all up and re-solder it to the rx/tx and it worked fine after that i guess i had a solder bridge under the USB socket causing the problem

      From: MIKE DURKIN <Patriot121@...>
      To: softrock40@yahoogroups.com
      Sent: Friday, December 7, 2012 8:38 AM
      Subject: RE: [softrock40] USB recognition

      Sounds odd ..... softrock PE0FKO firmware really shouldn't affect a previously working mouse ....

      Using a powered hub?

      Or its snotty OS..... cough cough ....

      Mike KC7NOA

      To: softrock40@yahoogroups.com
      From: n8ham@...
      Date: Fri, 7 Dec 2012 06:59:17 -0800
      Subject: Re: [softrock40] USB recognition

      I unplugged all, zip, then tried to unistall all and still nothing.  Now I can't even get my USB mouse to work.  I'm throwing in the towel.

      From: Alan <alan4alan@...>
      To: softrock40@yahoogroups.com
      Sent: Thu, December 6, 2012 2:04:16 PM
      Subject: Re: [softrock40] USB recognition


      ----- Original Message -----
      Subject: [softrock40] USB recognition

      >I spent yesterday trying to get my RXTX Ensemble to recognize the USB port and finally did something this AM---still not sure
      >what--that resulted in my computer recognizing the USB. I then moved onto the configuration tool and was having problems with
      >that. In frustration I shut everything down and am now back to square 1--the computer does not recognize the USB--In fact when I
      >plug it into the computer I get no feedback while when I plug it into a hub I get the 'does not recognize' message. Any ideas---I
      >guess my frustration is that I thought I had the problem corrected.

      Unplug ALL USB devices before putting in Softrock?

      73 Alan G4ZFQ

    • Show all 10 messages in this topic