70081Re: [softrock40] Peaberry SDR new firmware available
- Nov 15, 2012Hi Dave,
Search on Cypress Miniprog, this seems to be the one needed.
73 ... Sid.
On 14/11/12 02:47, Dave Watson wrote:
I'm just getting started with programming via JTAG so I don't have a clue. Do you know if the USB Blaster can be used to load the new firmware on the Cypress PSoC 3?
Ricardo, you need a JTAG programmer with software that supports the
Cypress PSoC 3. JTAG has been an IEEE standard for more than 20 years
so there are many different kinds.
Cheapest option is to find someone who already has one. Ask at your
local ham club or dorkbot. Links on the wiki:
There's a $15.68 board (free shipping) you can get on eBay as described here:
However, I can not help with this as I have not tried it yet.
I use a Cypress MiniProg 3 as listed on the wiki:
The connector on the Peaberry fits the MiniProg 3 exactly. This is a
The 10-pin connector on the Peaberry is a somewhat new format that
Cypress and ARM have started using. If you need an adapter, see the
73 David AE9RB
On Tue, Nov 13, 2012 at 10:54 AM, Ricardo Caratti <pu2clr@...> wrote:
> Hi David,
> Good news. I am very interested in upgrading my Peaberry firmware as soon as possible.
> But I would like to know how can I do that.
> I mean, how can I upload the peaberry 13 NOV 2012.hex to the PSoC chip?
> Sorry if my question is too elementary
-- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
- << Previous post in topic