50245Re: [softrock40] Re: QRP2000 USB-Controlled Synthesizer - Unknown Device (USB)
- Dec 6, 2010Hi,
I have tried during the weekend to extract all other USB devices (around 8) and check that the RXTX Ensemble and QRP2000 are recognised by Windows XP with a positive result.
Then adding USB devices one by one to find who is the conflicting one.
The answer is: the USB KVM switch (ATEN using a Logitech USB keyboard and a VX Nano cordless mouse). If this is not connected when the Softrock is connected, then it is recognized each time when plugged without problems.
The same happen with both Softrock and QRP2000, so fore sure a different type/version of firmware does not help.
It seems for me that the USB to I2C chip/firmware has some incompatibilities most probable with the USB mouse, even at the current version of firmware.
On 11/30/2010 11:39 PM, g8voip wrote:
You might not see the same problem with the Ensemble, as that uses Fred PE0FKO's upgraded version of the AVR firmware, where the QRP2000 USB Synth still uses the original DG8SAQ v1.4 firmware, which does have an odd bug in it.
I have swapped the firmware in the couple of USB synths I have here to Fred's version and not had any problem.
I actually used one of my modified USB synths as the test bed for all of the beta firmware testing Ihave done for Fred since v15.09.
73, Bob G8VOI
--- In firstname.lastname@example.org, Dan <danto@...> wrote:
> Hi Roelof,
> Great that you are satisfied with the Asus. For me is useless as I need it in Linux for the WebSDR and I cannot use it because some incompatibilities with other cards.
> Anyway, the majority of WebSDR servers around here are using the Asus with very good results.
> I'm in the process of building the RxTx Ensemble with a similar USB controlled Oscillator as in QRP2000.
> I will see soon if the problem is the same.
> WebSDR: http://yo3ggx.1p.ro:8765/
> On 11/30/2010 11:07 PM, Roelof Bakker wrote:
> > Hello Dan,
> > I'm afraid I can't help you with this problem.
> > On an other note, I have a similar problem with a EMU 0202 USB external
> > soundcard.
> > Under Windows XP the PC freezes on start up and will only proceed further
> > when the EMU is switched of with the hardware power switch. I have tried
> > all advice available, including
> > It does start up under Winder 7 32 bit, but only as USB 1.1 device. Again
> > switching it on and off with the power switch on the front panel let it
> > start as USB 2.0 device. It is an excellent sound card, but these start up
> > problems are a bit annoying.
> > I have tried all advice available, including the most recent Windows 7
> > drivers from EMU, but alas, no joy.
> > Hence I followed your advice, given last week, and purchased a ASUS Xonar
> > D1 internal soundcard. It works very well with my RX LF Ensemble once the
> > ASIO drivers are used. This is also the case with the EMU 0202 USB.
> > I use the RX LF Ensemble for weak signal work at longwave and the ASUS
> > card seems to be able to copy the weak ones as good as the EMU 0202.
> > 73,
> > Roelof, pa0rdt
- << Previous post in topic