Loading ...
Sorry, an error occurred while loading the content.

30671Re: [softrock40] DDS-34 / Re: Kits and a Website

Expand Messages
  • Stelian Valceanu
    Feb 2, 2009
    • 0 Attachment
      Well I don't know to much aobut this Si 570, how is generating the needed freq, it is a DDS or what?
      This DDS has the feature that is USB and can be used to continuus tune the freq.

      --- On Mon, 2/2/09, Mark J. Dulcey <mark@...> wrote:
      From: Mark J. Dulcey <mark@...>
      Subject: Re: [softrock40] DDS-34 / Re: Kits and a Website
      To: softrock40@yahoogroups.com
      Date: Monday, February 2, 2009, 3:33 AM

      ad9850 wrote:
      > please avoid using this DDS34 for a RXTX. Have a look at the output
      > spectrum of this oscillator:
      > http://softrock. raisdorf. org/images/ 80mx4.jpg
      > <http://softrock. raisdorf. org/images/ 80mx4.jpg>
      > This an example for a center frequeny of 14.600 MHz to operate on 80m
      > around 3.650 MHz. In case of the receiver the various spurious signals
      > are just your personal problem. But in case of transmitting you will
      > be outside of the regulations regarding suprious signals and you will
      > surely disturb other services and hams.

      It might be possible to use that DDS with careful selection of output
      frequencies (DDS spurs are highly dependent on that, and some choices
      are MUCH worse than others), but that would require the use of a
      spectrum analyzer to study its output. Output filtering would also help,
      as the really bad spurs in the example are well away from the center
      frequency. That said, it would be a lot easier to use an Si570-based
      frequency source instead.

    • Show all 25 messages in this topic