Loading ...
Sorry, an error occurred while loading the content.

Re: [soaplite] SOAP::Lite server returning complex types in wrong namespace?

Expand Messages
  • rjray@blackperl.com
    You are on the right track in noting that the element was given the wrong namespace for your purposes. When you don t give your out-going data an
    Message 1 of 8 , Jun 30, 2002
    • 0 Attachment
      You are on the right track in noting that the <minutes> element was given the
      wrong namespace for your purposes. When you don't give your out-going data an
      explicit namespace, SOAP::Lite tries to deduce one. For simple types it's much
      easier, but the complex types need *something* that goes beyond the xsd
      namespace, so http://namespaces.soaplite.com/perl gets used when there is no
      additional info.

      Good news is, this is easy to fix:

      sub getMinutes(){

      SOAP::Data->type('minutes')->uri('urn:SprintPCS')
      ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
      minutesLeft =>SOAP::Data->type(int => 500)});
      }

      (Apologies for the slight formatting changes, XEmacs gets a little eager
      sometimes.)

      I did take out the "return", since that isn't needed, and the extra 8
      characters make it easier to keep the code from wrapping :-).

      See if that helps.

      Randy
      --
      """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
      Randy J. Ray rjray@...
      Campbell, CA rjray@...
      <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>
    • adam roth
      ... Adding - uri( urn:SprintPCS ) is doing something -- as you can see below, but the minutes element is still bound to a new namesp3 -- which is set to:
      Message 2 of 8 , Jun 30, 2002
      • 0 Attachment

         I've had trouble with the submission form, so I've sent this again:
        ---------------------------------------------------------------------------------------------

        Adding ->uri('urn:SprintPCS') is doing something -- as you can see below,
        but the 'minutes' element is still bound to a new namesp3 -- which is set to:
        http://namespaces.soaplite.com/perl -- and that puts us back to the beginning.

        Any ideas on how to set the minutes element to the urn:SprintPCS namespace?
        (the code you gave me looks like it should work, but the XML response disagrees)

        Thanks,
        ADam

        ##########################
        # Updated Perl Module Code  #
        ##########################


        sub getMinutes(){

        shift;

        return SOAP::Data->type('minutes')->uri('urn:SprintPCS')->value({
        minutesUsed =>SOAP::Data->type(int => 1000),
        minutesLeft =>SOAP::Data->type(int => 500)});
        }

        ##########################
        # Updated XML Response      #
        ##########################

        <?xml version="1.0" encoding="UTF-8" ?>
        <SOAP-ENV:Envelope xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
        xmlns:namesp3="http://namespaces.soaplite.com/perl"
        SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
        xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
        xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
        xmlns:xsd="http://www.w3.org/1999/XMLSchema">

         <SOAP-ENV:Body>
          <namesp1:getMinutesResponse xmlns:namesp1="urn:SprintPCS">
           <namesp2:s-gensym3 xmlns:namesp2="urn:SprintPCS" xsi:type="namesp3:minutes">
            <minutesLeft xsi:type="xsd:int">500</minutesLeft>
            <minutesUsed xsi:type="xsd:int">1000</minutesUsed>
           </namesp2:s-gensym3>
          </namesp1:getMinutesResponse>
         </SOAP-ENV:Body>
        </SOAP-ENV:Envelope>
          rjray@... wrote:

        You are on the right track in noting that the <minutes> element was given the
        wrong namespace for your purposes. When you don't give your out-going data an
        explicit namespace, SOAP::Lite tries to deduce one. For simple types it's much
        easier, but the complex types need *something* that goes beyond the xsd
        namespace, so http://namespaces.soaplite.com/perl gets used when there is no
        additional info.

        Good news is, this is easy to fix:

        sub getMinutes(){

            SOAP::Data->type('minutes')->uri('urn:SprintPCS')
                      ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
                                minutesLeft =>SOAP::Data->type(int => 500)});
        }

        (Apologies for the slight formatting changes, XEmacs gets a little eager
        sometimes.)

        I did take out the "return", since that isn't needed, and the extra 8
        characters make it easier to keep the code from wrapping :-).

        See if that helps.

        Randy
        --
        """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
        Randy J. Ray                                                rjray@...
        Campbell, CA                                                     rjray@...
        <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>


        To unsubscribe from this group, send an email to:
        soaplite-unsubscribe@yahoogroups.com



        Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



        Do You Yahoo!?
        Sign-up for Video Highlights of 2002 FIFA World Cup

      • aroth816
        While waiting for a reply, I ve tried a few other things. Ive noticed that the same code (wsdl,cgi,perl module) generates a different XML response using a
        Message 3 of 8 , Jul 1, 2002
        • 0 Attachment
          While waiting for a reply, I've tried a few other things. Ive noticed
          that the same code (wsdl,cgi,perl module) generates a different XML
          response using a windows vs a linux server. The problem we are
          dealing with is that the linux server is returning an incorrect
          namespace on the complex type -- and the C#/java/whatever client
          cannot understand it.

          The XML response in windows is returning this:


          <?xml version="1.0" encoding="UTF-8"?>
          <SOAP-ENV:Envelope xmlns:SOAP-
          ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-
          ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
          xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
          xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
          xmlns:xsd="http://www.w3.org/1999/XMLSchema"
          xmlns:xmlsoap="http://xml.apache.org/xml-soap">
          <SOAP-ENV:Body>
          <namesp1:getMinutesResponse xmlns:namesp1="urn:SprintPCS">
          <namesp2:s-gensym4xmlns:namesp2="urn:SprintPCS"
          xsi:type="xmlsoap:Map">
          <item>
          <key xsi:type="xsd:string"/>
          <value xsi:type="xsd:int">500</value>
          </item>
          <item>
          <key xsi:type="xsd:string">minutesUsed</key>
          <value xsi:type="xsd:int">1000</value>
          </item>
          </namesp2:s-gensym4>
          </namesp1:getMinutesResponse><
          /SOAP-ENV:Body>
          </SOAP-ENV:Envelope>

          Notice the xsi:type="xmlsoap:Map" -- this is the difference between
          the response when returned on windows and linux. The linux server
          would return the same except for this line:

          <namesp2:s-gen sym3 xmlns:namesp2="urn:SprintPCS"
          xsi:type="namesp3:minutes">

          Summarized:
          WINDOWS SERVER: xsd:type="xmlsoap:Map"
          LINUX SERVER : xsd:type="namesp3:minutes"

          Now, the complex type is 'minutes'... so perhaps neither of these is
          right. (Why are there differences anyway??) But I have had the
          windows server work before with complex types. However, I need this
          to work on Linux. So if the SOAP authors or anybody very knowledgable
          with this, take a look at this thread and see if you could let me
          know how I can get complex types to be sent over the wire correctly>

          Thanks.
          Adam



          --- In soaplite@y..., adam roth <aroth816@y...> wrote:
          >
          > I've had trouble with the submission form, so I've sent this again:
          > --------------------------------------------------------------------
          -------------------------
          >
          > Adding ->uri('urn:SprintPCS') is doing something -- as you can see
          below,
          > but the 'minutes' element is still bound to a new namesp3 -- which
          is set to:
          > http://namespaces.soaplite.com/perl -- and that puts us back to the
          beginning.
          >
          > Any ideas on how to set the minutes element to the urn:SprintPCS
          namespace?
          > (the code you gave me looks like it should work, but the XML
          response disagrees)
          >
          > Thanks,
          > ADam
          >
          > ##########################
          > # Updated Perl Module Code #
          > ##########################
          >
          >
          > sub getMinutes(){
          >
          > shift;
          >
          > return SOAP::Data->type('minutes')->uri('urn:SprintPCS')->value({
          > minutesUsed =>SOAP::Data->type(int => 1000),
          > minutesLeft =>SOAP::Data->type(int => 500)});
          > }
          >
          > ##########################
          > # Updated XML Response #
          > ##########################
          >
          > <?xml version="1.0" encoding="UTF-8" ?>
          > <SOAP-ENV:Envelope xmlns:SOAP-
          ENC="http://schemas.xmlsoap.org/soap/encoding/"
          > xmlns:namesp3="http://namespaces.soaplite.com/perl"
          > SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
          > xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
          > xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
          > xmlns:xsd="http://www.w3.org/1999/XMLSchema">
          >
          > <SOAP-ENV:Body>
          > <namesp1:getMinutesResponse xmlns:namesp1="urn:SprintPCS">
          > <namesp2:s-gensym3 xmlns:namesp2="urn:SprintPCS"
          xsi:type="namesp3:minutes">
          > <minutesLeft xsi:type="xsd:int">500</minutesLeft>
          > <minutesUsed xsi:type="xsd:int">1000</minutesUsed>
          > </namesp2:s-gensym3>
          > </namesp1:getMinutesResponse>
          > </SOAP-ENV:Body>
          > </SOAP-ENV:Envelope>
          > rjray@b... wrote:
          > You are on the right track in noting that the <minutes> element was
          given the
          > wrong namespace for your purposes. When you don't give your out-
          going data an
          > explicit namespace, SOAP::Lite tries to deduce one. For simple
          types it's much
          > easier, but the complex types need *something* that goes beyond the
          xsd
          > namespace, so http://namespaces.soaplite.com/perl gets used when
          there is no
          > additional info.
          >
          > Good news is, this is easy to fix:
          >
          > sub getMinutes(){
          >
          > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
          > ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
          > minutesLeft =>SOAP::Data->type(int =>
          500)});
          > }
          >
          > (Apologies for the slight formatting changes, XEmacs gets a little
          eager
          > sometimes.)
          >
          > I did take out the "return", since that isn't needed, and the extra
          8
          > characters make it easier to keep the code from wrapping :-).
          >
          > See if that helps.
          >
          > Randy
          > --
          > """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
          """""""""""
          > Randy J. Ray
          rjray@b...
          > Campbell, CA
          rjray@s...
          > <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>
          >
          > Yahoo! Groups SponsorADVERTISEMENT
          >
          > To unsubscribe from this group, send an email to:
          > soaplite-unsubscribe@y...
          >
          >
          >
          > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
          Service.
          >
          >
          >
          > ---------------------------------
          > Do You Yahoo!?
          > Sign-up for Video Highlights of 2002 FIFA World Cup
        • aroth816
          The thread I am talking about can be found here: http://groups.yahoo.com/group/soaplite/message/1661 http://groups.yahoo.com/group/soaplite/message/1663
          Message 4 of 8 , Jul 1, 2002
          • 0 Attachment
            The thread I am talking about can be found here:

            http://groups.yahoo.com/group/soaplite/message/1661
            http://groups.yahoo.com/group/soaplite/message/1663
            http://groups.yahoo.com/group/soaplite/message/1664


            Thanks,
            Adam

            --- In soaplite@y..., "aroth816" <aroth816@y...> wrote:
            > While waiting for a reply, I've tried a few other things. Ive
            noticed
            > that the same code (wsdl,cgi,perl module) generates a different XML
            > response using a windows vs a linux server. The problem we are
            > dealing with is that the linux server is returning an incorrect
            > namespace on the complex type -- and the C#/java/whatever client
            > cannot understand it.
            >
            > The XML response in windows is returning this:
            >
            >
            > <?xml version="1.0" encoding="UTF-8"?>
            > <SOAP-ENV:Envelope xmlns:SOAP-
            > ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-
            > ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
            > xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            > xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
            > xmlns:xsd="http://www.w3.org/1999/XMLSchema"
            > xmlns:xmlsoap="http://xml.apache.org/xml-soap">
            > <SOAP-ENV:Body>
            > <namesp1:getMinutesResponse xmlns:namesp1="urn:SprintPCS">
            > <namesp2:s-gensym4xmlns:namesp2="urn:SprintPCS"
            > xsi:type="xmlsoap:Map">
            > <item>
            > <key xsi:type="xsd:string"/>
            > <value xsi:type="xsd:int">500</value>
            > </item>
            > <item>
            > <key xsi:type="xsd:string">minutesUsed</key>
            > <value xsi:type="xsd:int">1000</value>
            > </item>
            > </namesp2:s-gensym4>
            > </namesp1:getMinutesResponse><
            > /SOAP-ENV:Body>
            > </SOAP-ENV:Envelope>
            >
            > Notice the xsi:type="xmlsoap:Map" -- this is the difference between
            > the response when returned on windows and linux. The linux server
            > would return the same except for this line:
            >
            > <namesp2:s-gen sym3 xmlns:namesp2="urn:SprintPCS"
            > xsi:type="namesp3:minutes">
            >
            > Summarized:
            > WINDOWS SERVER: xsd:type="xmlsoap:Map"
            > LINUX SERVER : xsd:type="namesp3:minutes"
            >
            > Now, the complex type is 'minutes'... so perhaps neither of these
            is
            > right. (Why are there differences anyway??) But I have had the
            > windows server work before with complex types. However, I need this
            > to work on Linux. So if the SOAP authors or anybody very
            knowledgable
            > with this, take a look at this thread and see if you could let me
            > know how I can get complex types to be sent over the wire correctly>
            >
            > Thanks.
            > Adam
            >
            >
            >
            > --- In soaplite@y..., adam roth <aroth816@y...> wrote:
            > >
            > > I've had trouble with the submission form, so I've sent this
            again:
            > > ------------------------------------------------------------------
            --
            > -------------------------
            > >
            > > Adding ->uri('urn:SprintPCS') is doing something -- as you can
            see
            > below,
            > > but the 'minutes' element is still bound to a new namesp3 --
            which
            > is set to:
            > > http://namespaces.soaplite.com/perl -- and that puts us back to
            the
            > beginning.
            > >
            > > Any ideas on how to set the minutes element to the urn:SprintPCS
            > namespace?
            > > (the code you gave me looks like it should work, but the XML
            > response disagrees)
            > >
            > > Thanks,
            > > ADam
            > >
            > > ##########################
            > > # Updated Perl Module Code #
            > > ##########################
            > >
            > >
            > > sub getMinutes(){
            > >
            > > shift;
            > >
            > > return SOAP::Data->type('minutes')->uri('urn:SprintPCS')->value({
            > > minutesUsed =>SOAP::Data->type(int => 1000),
            > > minutesLeft =>SOAP::Data->type(int => 500)});
            > > }
            > >
            > > ##########################
            > > # Updated XML Response #
            > > ##########################
            > >
            > > <?xml version="1.0" encoding="UTF-8" ?>
            > > <SOAP-ENV:Envelope xmlns:SOAP-
            > ENC="http://schemas.xmlsoap.org/soap/encoding/"
            > > xmlns:namesp3="http://namespaces.soaplite.com/perl"
            > > SOAP-
            ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
            > > xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            > > xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
            > > xmlns:xsd="http://www.w3.org/1999/XMLSchema">
            > >
            > > <SOAP-ENV:Body>
            > > <namesp1:getMinutesResponse xmlns:namesp1="urn:SprintPCS">
            > > <namesp2:s-gensym3 xmlns:namesp2="urn:SprintPCS"
            > xsi:type="namesp3:minutes">
            > > <minutesLeft xsi:type="xsd:int">500</minutesLeft>
            > > <minutesUsed xsi:type="xsd:int">1000</minutesUsed>
            > > </namesp2:s-gensym3>
            > > </namesp1:getMinutesResponse>
            > > </SOAP-ENV:Body>
            > > </SOAP-ENV:Envelope>
            > > rjray@b... wrote:
            > > You are on the right track in noting that the <minutes> element
            was
            > given the
            > > wrong namespace for your purposes. When you don't give your out-
            > going data an
            > > explicit namespace, SOAP::Lite tries to deduce one. For simple
            > types it's much
            > > easier, but the complex types need *something* that goes beyond
            the
            > xsd
            > > namespace, so http://namespaces.soaplite.com/perl gets used when
            > there is no
            > > additional info.
            > >
            > > Good news is, this is easy to fix:
            > >
            > > sub getMinutes(){
            > >
            > > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
            > > ->value({ minutesUsed =>SOAP::Data->type(int =>
            1000),
            > > minutesLeft =>SOAP::Data->type(int =>
            > 500)});
            > > }
            > >
            > > (Apologies for the slight formatting changes, XEmacs gets a
            little
            > eager
            > > sometimes.)
            > >
            > > I did take out the "return", since that isn't needed, and the
            extra
            > 8
            > > characters make it easier to keep the code from wrapping :-).
            > >
            > > See if that helps.
            > >
            > > Randy
            > > --
            >
            > """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
            > """""""""""
            > > Randy J. Ray
            > rjray@b...
            > > Campbell, CA
            > rjray@s...
            > > <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>
            > >
            > > Yahoo! Groups SponsorADVERTISEMENT
            > >
            > > To unsubscribe from this group, send an email to:
            > > soaplite-unsubscribe@y...
            > >
            > >
            > >
            > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
            > Service.
            > >
            > >
            > >
            > > ---------------------------------
            > > Do You Yahoo!?
            > > Sign-up for Video Highlights of 2002 FIFA World Cup
          • Paul Kulchenko
            Hi, Randy! ... That s correct. ... it ll put the ELEMENT in urn:SprintPCS namespace, but doesn t change the TYPE/SCHEMA namespace. To do that, you need to
            Message 5 of 8 , Jul 2, 2002
            • 0 Attachment
              Hi, Randy!

              > namespace, so http://namespaces.soaplite.com/perl gets used when
              > there is no additional info.
              That's correct.

              > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
              > ->value({ minutesUsed =>SOAP::Data->type(int =>
              > 1000),
              > minutesLeft =>SOAP::Data->type(int =>
              > 500)});
              it'll put the ELEMENT in 'urn:SprintPCS' namespace, but doesn't
              change the TYPE/SCHEMA namespace. To do that, you need to use
              maptype() method:

              # individual
              $server->serializer->maptype->{minutes} = 'urn:SprintPCS';

              or

              # all at once; will delete all existent mappings
              $server->serializer->maptype({minutes => 'urn:SprintPCS'});

              then in your code you just say:

              SOAP::Data->type('minutes')
              ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
              minutesLeft =>SOAP::Data->type(int => 500)});

              Best wishes, Paul.

              --- rjray@... wrote:
              > You are on the right track in noting that the <minutes> element was
              > given the
              > wrong namespace for your purposes. When you don't give your
              > out-going data an
              > explicit namespace, SOAP::Lite tries to deduce one. For simple
              > types it's much
              > easier, but the complex types need *something* that goes beyond the
              > xsd
              > namespace, so http://namespaces.soaplite.com/perl gets used when
              > there is no
              > additional info.
              >
              > Good news is, this is easy to fix:
              >
              > sub getMinutes(){
              >
              > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
              > ->value({ minutesUsed =>SOAP::Data->type(int =>
              > 1000),
              > minutesLeft =>SOAP::Data->type(int =>
              > 500)});
              > }
              >
              > (Apologies for the slight formatting changes, XEmacs gets a little
              > eager
              > sometimes.)
              >
              > I did take out the "return", since that isn't needed, and the extra
              > 8
              > characters make it easier to keep the code from wrapping :-).
              >
              > See if that helps.
              >
              > Randy
              > --
              >
              """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
              > Randy J. Ray
              > rjray@...
              > Campbell, CA
              > rjray@...
              > <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>
              >
              > ------------------------ Yahoo! Groups Sponsor
              >
              > To unsubscribe from this group, send an email to:
              > soaplite-unsubscribe@yahoogroups.com
              >
              >
              >
              > Your use of Yahoo! Groups is subject to
              > http://docs.yahoo.com/info/terms/
              >
              >


              __________________________________________________
              Do You Yahoo!?
              Sign up for SBC Yahoo! Dial - First Month Free
              http://sbc.yahoo.com
            • aroth816
              Thank You Paul. This worked great! Adam ... was ... the ... extra
              Message 6 of 8 , Jul 2, 2002
              • 0 Attachment
                Thank You Paul. This worked great!

                Adam

                --- In soaplite@y..., Paul Kulchenko <paulclinger@y...> wrote:
                > Hi, Randy!
                >
                > > namespace, so http://namespaces.soaplite.com/perl gets used when
                > > there is no additional info.
                > That's correct.
                >
                > > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
                > > ->value({ minutesUsed =>SOAP::Data->type(int =>
                > > 1000),
                > > minutesLeft =>SOAP::Data->type(int =>
                > > 500)});
                > it'll put the ELEMENT in 'urn:SprintPCS' namespace, but doesn't
                > change the TYPE/SCHEMA namespace. To do that, you need to use
                > maptype() method:
                >
                > # individual
                > $server->serializer->maptype->{minutes} = 'urn:SprintPCS';
                >
                > or
                >
                > # all at once; will delete all existent mappings
                > $server->serializer->maptype({minutes => 'urn:SprintPCS'});
                >
                > then in your code you just say:
                >
                > SOAP::Data->type('minutes')
                > ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
                > minutesLeft =>SOAP::Data->type(int => 500)});
                >
                > Best wishes, Paul.
                >
                > --- rjray@b... wrote:
                > > You are on the right track in noting that the <minutes> element
                was
                > > given the
                > > wrong namespace for your purposes. When you don't give your
                > > out-going data an
                > > explicit namespace, SOAP::Lite tries to deduce one. For simple
                > > types it's much
                > > easier, but the complex types need *something* that goes beyond
                the
                > > xsd
                > > namespace, so http://namespaces.soaplite.com/perl gets used when
                > > there is no
                > > additional info.
                > >
                > > Good news is, this is easy to fix:
                > >
                > > sub getMinutes(){
                > >
                > > SOAP::Data->type('minutes')->uri('urn:SprintPCS')
                > > ->value({ minutesUsed =>SOAP::Data->type(int =>
                > > 1000),
                > > minutesLeft =>SOAP::Data->type(int =>
                > > 500)});
                > > }
                > >
                > > (Apologies for the slight formatting changes, XEmacs gets a little
                > > eager
                > > sometimes.)
                > >
                > > I did take out the "return", since that isn't needed, and the
                extra
                > > 8
                > > characters make it easier to keep the code from wrapping :-).
                > >
                > > See if that helps.
                > >
                > > Randy
                > > --
                > >
                > """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
                """""""""""
                > > Randy J. Ray
                > > rjray@b...
                > > Campbell, CA
                > > rjray@s...
                > > <A HREF="http://www.svsm.org">Silicon Valley Scale Modelers</A>
                > >
                > > ------------------------ Yahoo! Groups Sponsor
                > >
                > > To unsubscribe from this group, send an email to:
                > > soaplite-unsubscribe@y...
                > >
                > >
                > >
                > > Your use of Yahoo! Groups is subject to
                > > http://docs.yahoo.com/info/terms/
                > >
                > >
                >
                >
                > __________________________________________________
                > Do You Yahoo!?
                > Sign up for SBC Yahoo! Dial - First Month Free
                > http://sbc.yahoo.com
              • Paul Kulchenko
                Hi, Adam! ... you should be able to do this: $min = bless {minutesUsed = 1000, minutesLeft = 500} = minutes ; and then use $min with the same result. Best
                Message 7 of 8 , Jul 2, 2002
                • 0 Attachment
                  Hi, Adam!

                  --- aroth816 <aroth816@...> wrote:
                  > Thank You Paul. This worked great!

                  in fact, instead of doing this:

                  > > SOAP::Data->type('minutes')
                  > > ->value({ minutesUsed =>SOAP::Data->type(int => 1000),
                  > > minutesLeft =>SOAP::Data->type(int => 500)});

                  you should be able to do this:

                  $min = bless {minutesUsed => 1000, minutesLeft => 500} => 'minutes';

                  and then use $min with the same result.

                  Best wishes, Paul.


                  __________________________________________________
                  Do You Yahoo!?
                  Sign up for SBC Yahoo! Dial - First Month Free
                  http://sbc.yahoo.com
                Your message has been successfully submitted and would be delivered to recipients shortly.