Loading ...
Sorry, an error occurred while loading the content.

Re: [snowkiteidaho] Never mind

Expand Messages
  • Gear Daddy LLC
    Do or use compressed air....it will instantly burn holes in bladder. Eddy Petranek
    Message 1 of 12 , Nov 6, 2010
    • 0 Attachment
      Do or use compressed air....it will instantly burn holes in bladder.  

      Eddy Petranek 


      On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

       

      Greg do you have a air compressor ?
      ----- Original Message -----
      Sent: Saturday, November 06, 2010 6:40 PM
      Subject: [snowkiteidaho] Never mind

       

      Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
      Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
      Open to better suggestions.
      Sent via BlackBerry by AT&T

    • Greg Danley
      You say do not use compressed air? Sent via BlackBerry by AT&T ... From: Gear Daddy LLC Sender: snowkiteidaho@yahoogroups.com Date:
      Message 2 of 12 , Nov 6, 2010
      • 0 Attachment
        You say do not use compressed air?

        Sent via BlackBerry by AT&T


        From: Gear Daddy LLC <geardaddyllc@...>
        Sender: snowkiteidaho@yahoogroups.com
        Date: Sat, 6 Nov 2010 22:17:33 -0600
        To: snowkiteidaho@yahoogroups.com<snowkiteidaho@yahoogroups.com>
        ReplyTo: snowkiteidaho@yahoogroups.com
        Subject: Re: [snowkiteidaho] Never mind

         

        Do or use compressed air....it will instantly burn holes in bladder.  

        Eddy Petranek 


        On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

         

        Greg do you have a air compressor ?
        ----- Original Message -----
        Sent: Saturday, November 06, 2010 6:40 PM
        Subject: [snowkiteidaho] Never mind

         

        Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
        Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
        Open to better suggestions.
        Sent via BlackBerry by AT&T

      • Gear Daddy LLC
        Sorry do not use compressed air Eddy Petranek
        Message 3 of 12 , Nov 6, 2010
        • 0 Attachment
          Sorry do not use compressed air

          Eddy Petranek 


          On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

           

          You say do not use compressed air?

          Sent via BlackBerry by AT&T


          From: Gear Daddy LLC <geardaddyllc@...>
          Date: Sat, 6 Nov 2010 22:17:33 -0600
          Subject: Re: [snowkiteidaho] Never mind

           

          Do or use compressed air....it will instantly burn holes in bladder.  

          Eddy Petranek 


          On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

           

          Greg do you have a air compressor ?
          ----- Original Message -----
          Sent: Saturday, November 06, 2010 6:40 PM
          Subject: [snowkiteidaho] Never mind

           

          Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
          Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
          Open to better suggestions.
          Sent via BlackBerry by AT&T

        • Greg Danley
          Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there. Sent via BlackBerry by AT&T ... From: Gear Daddy LLC
          Message 4 of 12 , Nov 6, 2010
          • 0 Attachment
            Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

            Sent via BlackBerry by AT&T


            From: Gear Daddy LLC <geardaddyllc@...>
            Sender: snowkiteidaho@yahoogroups.com
            Date: Sat, 6 Nov 2010 22:35:22 -0600
            To: snowkiteidaho@yahoogroups.com<snowkiteidaho@yahoogroups.com>
            ReplyTo: snowkiteidaho@yahoogroups.com
            Subject: Re: [snowkiteidaho] Never mind

             

            Sorry do not use compressed air

            Eddy Petranek 


            On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

             

            You say do not use compressed air?

            Sent via BlackBerry by AT&T


            From: Gear Daddy LLC <geardaddyllc@...>
            Date: Sat, 6 Nov 2010 22:17:33 -0600
            Subject: Re: [snowkiteidaho] Never mind

             

            Do or use compressed air....it will instantly burn holes in bladder.  

            Eddy Petranek 


            On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

             

            Greg do you have a air compressor ?
            ----- Original Message -----
            Sent: Saturday, November 06, 2010 6:40 PM
            Subject: [snowkiteidaho] Never mind

             

            Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
            Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
            Open to better suggestions.
            Sent via BlackBerry by AT&T

          • Steve Linane
            Greg Every air compressor has a regulator you can turn it down to 30lb to start and go up from there . Don t want to contradict EDDY but I have used my
            Message 5 of 12 , Nov 7, 2010
            • 0 Attachment
              
              Greg
              Every air compressor has a regulator you can turn it down to 30lb to start and go up from there  . Don't want to contradict EDDY but I have used my compressor to inflate my kites and didn't burn a hole or other wise start them on fire .. First when the kite is very dry open the Velcro ends and just try shacking it out . No doubt the sand is stuck along the way so some wrinkling and light hitting with your hand mite loosen it . the problem with water or air is getting access to the individual bladders .   The sand cant get in when it is inflated so it  most likely its getting in when it is in the bag or on the beach when you roll it up . the ends of the struts are like a tub that folds over and Velcro's in place , very hard for sand to get through there ,most likely it gets in around the inflation valve or valves if yours isn't a single pump . I have found sand inside my bladders at times ( only noticed when I had removed them from kite ) and this was a easy fix just inflate the bladder and pore the sand out the inflation valve . Sand will get in from the pump , on the beach and leavening the cap open in the bag .
              ----- Original Message -----
              Sent: Saturday, November 06, 2010 10:07 PM
              Subject: Re: [snowkiteidaho] Never mind

               

              Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

              Sent via BlackBerry by AT&T


              From: Gear Daddy LLC <geardaddyllc@...>
              Date: Sat, 6 Nov 2010 22:35:22 -0600
              Subject: Re: [snowkiteidaho] Never mind

               

              Sorry do not use compressed air

              Eddy Petranek 


              On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

               

              You say do not use compressed air?

              Sent via BlackBerry by AT&T


              From: Gear Daddy LLC <geardaddyllc@...>
              Date: Sat, 6 Nov 2010 22:17:33 -0600
              Subject: Re: [snowkiteidaho] Never mind

               

              Do or use compressed air....it will instantly burn holes in bladder.  

              Eddy Petranek 


              On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

               

              Greg do you have a air compressor ?
              ----- Original Message -----
              Sent: Saturday, November 06, 2010 6:40 PM
              Subject: [snowkiteidaho] Never mind

               

              Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
              Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
              Open to better suggestions.
              Sent via BlackBerry by AT&T

            • Gear Daddy LLC
              Steve is right you need to turn PSI down to ~10psi. Otherwise, you will burn a hole in bladder. No the bladder does not Burst in to flames, but that would be
              Message 6 of 12 , Nov 7, 2010
              • 0 Attachment
                Steve is right you need to turn PSI down to ~10psi.  Otherwise, you will burn a hole in bladder. No the bladder does not Burst in to flames, but that would be fun. Better off not using compressor as this will spoil the heck out of you, and you'll never want to pump again. My understanding of your email was that the sand was between casing and bladder??? low psi will not blast sand out ends of kite wing tip velcro ends!!!

                You guys who are still out there playing on the water...My hat is off to you!  Maybe next season I'll play a little later in year, having more fun with my little Calvin. Just pulled out my snow kites and knocking the dust off them :-)!!!  Maybe sometime soon??? or maybe we will water kite year round.  Climate Change???

                Eddy @ Gear Daddy LLC
                208-863-6966

                On Nov 7, 2010, at 7:21 AM, Steve Linane wrote:

                 

                

                Greg
                Every air compressor has a regulator you can turn it down to 30lb to start and go up from there  . Don't want to contradict EDDY but I have used my compressor to inflate my kites and didn't burn a hole or other wise start them on fire .. First when the kite is very dry open the Velcro ends and just try shacking it out . No doubt the sand is stuck along the way so some wrinkling and light hitting with your hand mite loosen it . the problem with water or air is getting access to the individual bladders .   The sand cant get in when it is inflated so it  most likely its getting in when it is in the bag or on the beach when you roll it up . the ends of the struts are like a tub that folds over and Velcro's in place , very hard for sand to get through there ,most likely it gets in around the inflation valve or valves if yours isn't a single pump . I have found sand inside my bladders at times ( only noticed when I had removed them from kite ) and this was a easy fix just inflate the bladder and pore the sand out the inflation valve . Sand will get in from the pump , on the beach and leavening the cap open in the bag .
                ----- Original Message -----
                Sent: Saturday, November 06, 2010 10:07 PM
                Subject: Re: [snowkiteidaho] Never mind

                 

                Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

                Sent via BlackBerry by AT&T


                From: Gear Daddy LLC <geardaddyllc@...>
                Date: Sat, 6 Nov 2010 22:35:22 -0600
                Subject: Re: [snowkiteidaho] Never mind

                 

                Sorry do not use compressed air

                Eddy Petranek 


                On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

                 

                You say do not use compressed air?

                Sent via BlackBerry by AT&T


                From: Gear Daddy LLC <geardaddyllc@...>
                Date: Sat, 6 Nov 2010 22:17:33 -0600
                Subject: Re: [snowkiteidaho] Never mind

                 

                Do or use compressed air....it will instantly burn holes in bladder.  

                Eddy Petranek 


                On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

                 

                Greg do you have a air compressor ?
                ----- Original Message -----
                Sent: Saturday, November 06, 2010 6:40 PM
                Subject: [snowkiteidaho] Never mind

                 

                Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
                Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
                Open to better suggestions.
                Sent via BlackBerry by AT&T








              • Steve Linane
                We are talking about sand between the bladder and the casing that s why I suggest 30 psi to start ., 10 psi to inflate but that is another subject / sand
                Message 7 of 12 , Nov 7, 2010
                • 0 Attachment
                  
                  We are talking about sand between the bladder and the casing that's why I suggest 30 psi to start ., 10 psi to inflate but that is another subject / sand  inside the bladder was a side note I interjected as a related topic for your edification
                   
                  Its 58 at the airport but the LP raws are low , I think I will go up for a look any way
                  ----- Original Message -----
                  Sent: Sunday, November 07, 2010 7:44 AM
                  Subject: Re: [snowkiteidaho] Never mind

                   

                  Steve is right you need to turn PSI down to ~10psi.  Otherwise, you will burn a hole in bladder. No the bladder does not Burst in to flames, but that would be fun. Better off not using compressor as this will spoil the heck out of you, and you'll never want to pump again. My understanding of your email was that the sand was between casing and bladder??? low psi will not blast sand out ends of kite wing tip velcro ends!!!


                  You guys who are still out there playing on the water...My hat is off to you!  Maybe next season I'll play a little later in year, having more fun with my little Calvin. Just pulled out my snow kites and knocking the dust off them :-)!!!  Maybe sometime soon??? or maybe we will water kite year round.  Climate Change???

                  Eddy @ Gear Daddy LLC
                  208-863-6966

                  On Nov 7, 2010, at 7:21 AM, Steve Linane wrote:

                   

                  

                  Greg
                  Every air compressor has a regulator you can turn it down to 30lb to start and go up from there  . Don't want to contradict EDDY but I have used my compressor to inflate my kites and didn't burn a hole or other wise start them on fire .. First when the kite is very dry open the Velcro ends and just try shacking it out . No doubt the sand is stuck along the way so some wrinkling and light hitting with your hand mite loosen it . the problem with water or air is getting access to the individual bladders .   The sand cant get in when it is inflated so it  most likely its getting in when it is in the bag or on the beach when you roll it up . the ends of the struts are like a tub that folds over and Velcro's in place , very hard for sand to get through there ,most likely it gets in around the inflation valve or valves if yours isn't a single pump . I have found sand inside my bladders at times ( only noticed when I had removed them from kite ) and this was a easy fix just inflate the bladder and pore the sand out the inflation valve . Sand will get in from the pump , on the beach and leavening the cap open in the bag .
                  ----- Original Message -----
                  Sent: Saturday, November 06, 2010 10:07 PM
                  Subject: Re: [snowkiteidaho] Never mind

                   

                  Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

                  Sent via BlackBerry by AT&T


                  From: Gear Daddy LLC <geardaddyllc@...>
                  Date: Sat, 6 Nov 2010 22:35:22 -0600
                  Subject: Re: [snowkiteidaho] Never mind

                   

                  Sorry do not use compressed air

                  Eddy Petranek 


                  On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

                   

                  You say do not use compressed air?

                  Sent via BlackBerry by AT&T


                  From: Gear Daddy LLC <geardaddyllc@...>
                  Date: Sat, 6 Nov 2010 22:17:33 -0600
                  Subject: Re: [snowkiteidaho] Never mind

                   

                  Do or use compressed air....it will instantly burn holes in bladder.  

                  Eddy Petranek 


                  On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

                   

                  Greg do you have a air compressor ?
                  ----- Original Message -----
                  Sent: Saturday, November 06, 2010 6:40 PM
                  Subject: [snowkiteidaho] Never mind

                   

                  Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
                  Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
                  Open to better suggestions.
                  Sent via BlackBerry by AT&T








                • Greg Danley
                  My question was about sand between the bladder and the casing. However after opening up the tip pockets and trying to wash out the leading edge casing I did
                  Message 8 of 12 , Nov 7, 2010
                  • 0 Attachment
                    My question was about sand between the bladder and the casing. However after opening up the tip pockets and trying to wash out the leading edge casing I did notice a few grains of sand on the inside of my bladder.

                    I am looking at the water at LP and there is not much happening YET. A few puffs are rolling down the pipe.
                    Will hang for a while, will post if it picks up.

                    Sent via BlackBerry by AT&T


                    From: "Steve Linane" <stevelinane@...>
                    Sender: snowkiteidaho@yahoogroups.com
                    Date: Sun, 7 Nov 2010 08:22:08 -0700
                    To: <snowkiteidaho@yahoogroups.com>
                    ReplyTo: snowkiteidaho@yahoogroups.com
                    Subject: Re: [snowkiteidaho] Never mind

                     

                    

                    We are talking about sand between the bladder and the casing that's why I suggest 30 psi to start ., 10 psi to inflate but that is another subject / sand  inside the bladder was a side note I interjected as a related topic for your edification
                     
                    Its 58 at the airport but the LP raws are low , I think I will go up for a look any way
                    ----- Original Message -----
                    Sent: Sunday, November 07, 2010 7:44 AM
                    Subject: Re: [snowkiteidaho] Never mind

                     

                    Steve is right you need to turn PSI down to ~10psi.  Otherwise, you will burn a hole in bladder. No the bladder does not Burst in to flames, but that would be fun. Better off not using compressor as this will spoil the heck out of you, and you'll never want to pump again. My understanding of your email was that the sand was between casing and bladder??? low psi will not blast sand out ends of kite wing tip velcro ends!!!


                    You guys who are still out there playing on the water...My hat is off to you!  Maybe next season I'll play a little later in year, having more fun with my little Calvin. Just pulled out my snow kites and knocking the dust off them :-)!!!  Maybe sometime soon??? or maybe we will water kite year round.  Climate Change???

                    Eddy @ Gear Daddy LLC
                    208-863-6966

                    On Nov 7, 2010, at 7:21 AM, Steve Linane wrote:

                     

                    

                    Greg
                    Every air compressor has a regulator you can turn it down to 30lb to start and go up from there  . Don't want to contradict EDDY but I have used my compressor to inflate my kites and didn't burn a hole or other wise start them on fire .. First when the kite is very dry open the Velcro ends and just try shacking it out . No doubt the sand is stuck along the way so some wrinkling and light hitting with your hand mite loosen it . the problem with water or air is getting access to the individual bladders .   The sand cant get in when it is inflated so it  most likely its getting in when it is in the bag or on the beach when you roll it up . the ends of the struts are like a tub that folds over and Velcro's in place , very hard for sand to get through there ,most likely it gets in around the inflation valve or valves if yours isn't a single pump . I have found sand inside my bladders at times ( only noticed when I had removed them from kite ) and this was a easy fix just inflate the bladder and pore the sand out the inflation valve . Sand will get in from the pump , on the beach and leavening the cap open in the bag .
                    ----- Original Message -----
                    Sent: Saturday, November 06, 2010 10:07 PM
                    Subject: Re: [snowkiteidaho] Never mind

                     

                    Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

                    Sent via BlackBerry by AT&T


                    From: Gear Daddy LLC <geardaddyllc@...>
                    Date: Sat, 6 Nov 2010 22:35:22 -0600
                    Subject: Re: [snowkiteidaho] Never mind

                     

                    Sorry do not use compressed air

                    Eddy Petranek 


                    On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

                     

                    You say do not use compressed air?

                    Sent via BlackBerry by AT&T


                    From: Gear Daddy LLC <geardaddyllc@...>
                    Date: Sat, 6 Nov 2010 22:17:33 -0600
                    Subject: Re: [snowkiteidaho] Never mind

                     

                    Do or use compressed air....it will instantly burn holes in bladder.  

                    Eddy Petranek 


                    On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

                     

                    Greg do you have a air compressor ?
                    ----- Original Message -----
                    Sent: Saturday, November 06, 2010 6:40 PM
                    Subject: [snowkiteidaho] Never mind

                     

                    Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
                    Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
                    Open to better suggestions.
                    Sent via BlackBerry by AT&T








                  • Greg Danley
                    La la la nina, shoot its gotta be 55 or so here at lucky peak, wind hasn t hit yet, don t know if these clouds are blocking it from comming in, looked good at
                    Message 9 of 12 , Nov 7, 2010
                    • 0 Attachment
                      La la la nina, shoot its gotta be 55 or so here at lucky peak, wind hasn't hit yet, don't know if these clouds are blocking it from comming in, looked good at airport. Your not missing much here!
                      I guess kite maintenance\hygene is a good topic. Thanks for replys.

                      Sent via BlackBerry by AT&T


                      From: Gear Daddy LLC <geardaddyllc@...>
                      Sender: snowkiteidaho@yahoogroups.com
                      Date: Sun, 7 Nov 2010 07:44:56 -0700
                      To: <snowkiteidaho@yahoogroups.com>
                      ReplyTo: snowkiteidaho@yahoogroups.com
                      Subject: Re: [snowkiteidaho] Never mind

                       

                      Steve is right you need to turn PSI down to ~10psi.  Otherwise, you will burn a hole in bladder. No the bladder does not Burst in to flames, but that would be fun. Better off not using compressor as this will spoil the heck out of you, and you'll never want to pump again. My understanding of your email was that the sand was between casing and bladder??? low psi will not blast sand out ends of kite wing tip velcro ends!!!


                      You guys who are still out there playing on the water...My hat is off to you!  Maybe next season I'll play a little later in year, having more fun with my little Calvin. Just pulled out my snow kites and knocking the dust off them :-)!!!  Maybe sometime soon??? or maybe we will water kite year round.  Climate Change???

                      Eddy @ Gear Daddy LLC
                      208-863-6966

                      On Nov 7, 2010, at 7:21 AM, Steve Linane wrote:

                       

                      

                      Greg
                      Every air compressor has a regulator you can turn it down to 30lb to start and go up from there  . Don't want to contradict EDDY but I have used my compressor to inflate my kites and didn't burn a hole or other wise start them on fire .. First when the kite is very dry open the Velcro ends and just try shacking it out . No doubt the sand is stuck along the way so some wrinkling and light hitting with your hand mite loosen it . the problem with water or air is getting access to the individual bladders .   The sand cant get in when it is inflated so it  most likely its getting in when it is in the bag or on the beach when you roll it up . the ends of the struts are like a tub that folds over and Velcro's in place , very hard for sand to get through there ,most likely it gets in around the inflation valve or valves if yours isn't a single pump . I have found sand inside my bladders at times ( only noticed when I had removed them from kite ) and this was a easy fix just inflate the bladder and pore the sand out the inflation valve . Sand will get in from the pump , on the beach and leavening the cap open in the bag .
                      ----- Original Message -----
                      Sent: Saturday, November 06, 2010 10:07 PM
                      Subject: Re: [snowkiteidaho] Never mind

                       

                      Thanks for the advice. Looks like there may be wind in the morning. Hope to see you out there.

                      Sent via BlackBerry by AT&T


                      From: Gear Daddy LLC <geardaddyllc@...>
                      Date: Sat, 6 Nov 2010 22:35:22 -0600
                      Subject: Re: [snowkiteidaho] Never mind

                       

                      Sorry do not use compressed air

                      Eddy Petranek 


                      On Nov 6, 2010, at 10:25 PM, "Greg Danley" <daflyinhawaiian64@...> wrote:

                       

                      You say do not use compressed air?

                      Sent via BlackBerry by AT&T


                      From: Gear Daddy LLC <geardaddyllc@...>
                      Date: Sat, 6 Nov 2010 22:17:33 -0600
                      Subject: Re: [snowkiteidaho] Never mind

                       

                      Do or use compressed air....it will instantly burn holes in bladder.  

                      Eddy Petranek 


                      On Nov 6, 2010, at 8:23 PM, "Steve Linane" <stevelinane@...> wrote:

                       

                      Greg do you have a air compressor ?
                      ----- Original Message -----
                      Sent: Saturday, November 06, 2010 6:40 PM
                      Subject: [snowkiteidaho] Never mind

                       

                      Ok for all those who are laughing their a--'s off I figured it out, sand really chafes when its in your shorts and you wear really tight jeans!
                      Also there are some handy velcro tabs at the ends of the kite (probably where the sand gets in) and a handy zipper in the middle of the main bladder that one can run the water hose in to rinse out the kite. I hope I got most if not all of it out.
                      Open to better suggestions.
                      Sent via BlackBerry by AT&T








                    Your message has been successfully submitted and would be delivered to recipients shortly.