Loading ...
Sorry, an error occurred while loading the content.

Re: IV17 smartsocket software

Expand Messages
  • fixitsan2
    There are a couple of vendors of IV-17 tubes watching out for the boards for this project to appear. They still have many hundreds of tubes in stock but for
    Message 1 of 6 , Apr 18, 2011
    • 0 Attachment
      There are a couple of vendors of IV-17 tubes watching out for the boards for this project to appear. They still have many hundreds of tubes in stock but for how long is anyone's guess !

      Best Wishes
      Chris

      --- In smartsockets@yahoogroups.com, "guus.assmann@..." <guus.assmann@...> wrote:
      >
      > Hello Chris,
      >
      > This is how it's done.
      > Mind you, there's some mistakes still, the drivers for the DP are not correct.
      > And also, the voltage regulator is like the 7805 layout.
      > This will be corrected in future.
      > To connect more PCB's, simply don't mount the TO220 components and screw
      > the PCB's together.
      > I will make a couple of new PCB's with the errors corrected.
      >
      > BR/
      > Guus
      >
      > >-- Oorspronkelijk bericht --
      > >To: smartsockets@yahoogroups.com
      > >From: "fixitsan2" <fixitsan@...>
      > >Date: Mon, 18 Apr 2011 15:15:08 -0000
      > >Subject: [smartsockets] Re: IV17 smartsocket software
      > >Reply-To: smartsockets@yahoogroups.com
      > >
      > >
      > >
      > >Okay Guus, well done with making it all fit on a single side, that opens
      > >up real possibilities to make these boards at home i think.
      > >
      > >chris
      > >
      > >--- In smartsockets@yahoogroups.com, "guus.assmann@" <guus.assmann@>
      > >wrote:
      > >>
      > >> Hello Chris,
      > >>
      > >> PCB is single sided. And so I've used the pinout from the schematics.
      > >> This seemed easier, as there are a lot of wires to connect the displays
      > >to
      > >> the drivers anyway. Changing the connections wouls not have made the routing
      > >> easier.
      > >>
      > >> BR/
      > >> Guus
      > >>
      > >> >-- Oorspronkelijk bericht --
      > >> >To: smartsockets@yahoogroups.com
      > >> >From: "fixitsan2" <fixitsan@>
      > >> >Date: Sun, 17 Apr 2011 14:44:08 -0000
      > >> >Subject: [smartsockets] Re: IV17 smartsocket software
      > >> >Reply-To: smartsockets@yahoogroups.com
      > >> >
      > >> >
      > >> >
      > >> >
      > >> >--- In smartsockets@yahoogroups.com, "Guus" <guus.assmann@> wrote:
      > >> >>
      > >> >> Hello Chris,
      > >> >>
      > >> >> Finally I've managed to get a PCB desiged and it seems to work.
      > >> >
      > >> >
      > >> >Out of interest, did you use the pin remapping feature or are yoiu just
      > >> using
      > >> >the original pinouts dictated by the software ?
      > >> >
      > >>
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.