I just need to add a couple of lines to reactivate the potentiometer function, so no problem there.
It takes a bit of tweaking but you can get control of both duty and frequency that way.
The 'V' command will display the version number, however, just for the sake of testing the
display I would prefer to use a test button instead of having the display shown every
time the unit powers up.
I'll look into these things when I return and hope this makes it a more useable device
To: fixitsan2 <fixitsan@...
Sent: Sun, 17 Apr 2011 13:44
Subject: IV17 smartsocket software
Yes that's what I meant.
The output to the FET does have a pulse, but it's not influenced by the
It looks like the pins are outputs and not analog inputs.
And for a test of the drivers, it would be nice if the displays would indicate
the version number of the program during startup.
In any case, I wish you a good stay in Switzerland and an even better return
>-- Oorspronkelijk bericht --
>Date: Sat, 16 Apr 2011 22:01:16 -0000
>From: "fixitsan2" <fixitsan@...>
>To: "Guus" <guus.assmann@...>
>Subject: Re: IV17 smartsocket software
>If you mean by software to support the 40V circuit' an output form the pic
>to switch a fet for example then no, this is not included (it may be working
>but I'm only 30% sure)
>I will look into this for when I get back to the UK, I am working in
>at the moment for another week or so and do not have have any hardware to
>test the code with me.