Loading ...
Sorry, an error occurred while loading the content.

1112RE: Using IV-17 smartsocket with usb>ttl adapter

Expand Messages
  • julietmikebravo
    Dec 28, 2013

      Recently I hooked up the smartsocket to my Raspberry Pi, first via a USB->TTL adapter, later using the on board GPIO UART. Suddenly no problem sending commands to the board:


      Seems like using Linux with cheap USB->TTL adapters is problematic, everything works fine just echo'ing stuff from bash like this:

      sudo echo -ne "MS\70\4\1 text text text"

      Works like a charm now :)

    • Show all 12 messages in this topic