Loading ...
Sorry, an error occurred while loading the content.

Re: [sierra_wilderness_radio] Re: Kc2 Wattmeter rf cal adjustment "touchy"

Expand Messages
  • Kelly E. McClelland
    Rob, Thank you very much for this tip! Good catch and easy to see how it might trip one up during the build. I ll take a close look and see if that might be
    Message 1 of 4 , Jun 26, 2010
    • 0 Attachment
      Rob,

      Thank you very much for this tip! Good catch and easy to see how it
      might trip one up during the build.

      I'll take a close look and see if that might be the same on mine.
      Appreciate your taking time to send this along.

      73,
      Kelly K4UPG

      On 6/26/2010 8:03 PM, rasteenb wrote:
      >
      >
      >
      > Hi kelly:
      >
      > I fixed mine. Diode D16 was installed backwards.
      > D16 is located very close to the antenna jack and the RF cal pot.
      > I also replaced C80 with a simple jumper to take one side of the pot
      > straight to ground.
      >
      > Take a look and see if that's the issue. The diode was marked with a
      > yellow stripe instead of the usual black stripe which may have
      > confused the person who built my sierra.
      >
      > 72,
      > Rob KA8JBY
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.