Loading ...
Sorry, an error occurred while loading the content.
 

Re: [serapier] Fw: [Mid-MOF] Rapier helms

Expand Messages
  • Gassion
    I also have two helms that I ll be selling as soon as I get them finished. I should have them done soon and will post some pictures. Gassion ... From: Wendy
    Message 1 of 3 , Mar 1, 2006
      I also have two helms that I'll be selling as soon as I get them finished.
      I should have them done soon and will post some pictures.

      Gassion

      ----- Original Message -----
      From: "Wendy Colbert" <rapierlady@...>
      To: "serapier" <SErapier@yahoogroups.com>
      Sent: Tuesday, February 28, 2006 6:10 PM
      Subject: [serapier] Fw: [Mid-MOF] Rapier helms


      > For those looking for rapier safe helms.
      > Irene
      >
      > -----Forwarded Message-----
      >>From: Marco-Borromei <marco-borromei@...>
      >>Sent: Feb 28, 2006 6:03 PM
      >>To: mkmof@yahoogroups.com
      >>Subject: [Mid-MOF] Rapier helms
      >>
      >>With Cut&Thrust impending, and since its been a while since the topic has
      >>been discussed...
      >>
      >>What is a Rapier Helm and how do you get one?
      >>Well, Master Don Warder Kevin has a fine article about that here:
      >>http://www.companyofthebronzering.org/library/technology/rapierhelmet.pdf
      >>
      >>Now, I've been making some helms for the last few years, and have decided
      >>to offer 3 opportunities to help people get a helm.
      >>
      >>First, I have patterns for faceplate conversions on SOME helms. If you
      >>have one of these helms, I will give you the pattern to convert it
      >>yourself or have an experienced armorer convert it for you. I also have
      >>large sheets of the perf steel necessary and will sell it by the SQ. IN.
      >>so you don't need to shell out $130 for a sheet you'll never use.
      >>
      >>Second, if you have a helm, I may be able to convert it for you. Yes, I
      >>charge for this service, and no I can't convert Morions... Email me with
      >>a pic of your helm and we'll go from there. There is at least one other
      >>armorer out there who advertises this service, so by all means shop
      >>around.
      >>
      >>Third, I'm selling 4 [right now, more later] stock helm designs fully
      >>converted for the rapier field. http://www.marco-borromei.com
      >>
      >>Fourth and finally, I'll always offer advise on helm purchase, design,
      >>conversion,.etc. If you're thinking about buying one, I may be able to
      >>answer certain questions about certain vendors and products. I do NOT get
      >>any kickback from other people's sales, nor does my free advice have any
      >>warranty on it. But I'll wager I've held more helms in my hands than most
      >>folks. The web page above has additional info on helms including
      >>measurements as I acquire them.
      >>
      >>To wrap it up, helms are cool.
      >>
      >>Marco
      >>
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      >
    • Dale Oliver
      ... G ... topic has been discussed... ... .pdf ... decided to offer 3 opportunities to help people get a helm. ... If you have one of these helms, I will give
      Message 2 of 3 , Mar 1, 2006
        --- I like the Corinthian one, too bad it's gold.

        G


        In serapier@yahoogroups.com, Wendy Colbert <rapierlady@...> wrote:
        >
        > For those looking for rapier safe helms.
        > Irene
        >
        > -----Forwarded Message-----
        > >From: Marco-Borromei <marco-borromei@...>
        > >Sent: Feb 28, 2006 6:03 PM
        > >To: mkmof@yahoogroups.com
        > >Subject: [Mid-MOF] Rapier helms
        > >
        > >With Cut&Thrust impending, and since its been a while since the
        topic has been discussed...
        > >
        > >What is a Rapier Helm and how do you get one?
        > >Well, Master Don Warder Kevin has a fine article about that here:
        >
        >http://www.companyofthebronzering.org/library/technology/rapierhelmet
        .pdf
        > >
        > >Now, I've been making some helms for the last few years, and have
        decided to offer 3 opportunities to help people get a helm.
        > >
        > >First, I have patterns for faceplate conversions on SOME helms.
        If you have one of these helms, I will give you the pattern to
        convert it yourself or have an experienced armorer convert it for
        you. I also have large sheets of the perf steel necessary and will
        sell it by the SQ. IN. so you don't need to shell out $130 for a
        sheet you'll never use.
        > >
        > >Second, if you have a helm, I may be able to convert it for you.
        Yes, I charge for this service, and no I can't convert Morions...
        Email me with a pic of your helm and we'll go from there. There is
        at least one other armorer out there who advertises this service, so
        by all means shop around.
        > >
        > >Third, I'm selling 4 [right now, more later] stock helm designs
        fully converted for the rapier field. http://www.marco-borromei.com
        > >
        > >Fourth and finally, I'll always offer advise on helm purchase,
        design, conversion,.etc. If you're thinking about buying one, I may
        be able to answer certain questions about certain vendors and
        products. I do NOT get any kickback from other people's sales, nor
        does my free advice have any warranty on it. But I'll wager I've
        held more helms in my hands than most folks. The web page above has
        additional info on helms including measurements as I acquire them.
        > >
        > >To wrap it up, helms are cool.
        > >
        > >Marco
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.