Loading ...
Sorry, an error occurred while loading the content.

14948Re: [sdr-radio-com] Re: version 1.5 crashing when tx mute is selected and I hit the cw key to transmit.

Expand Messages
  • Stu C
    May 1, 2013
      Hi Robert,

      I'm not feeling exactly inspired but here are some questions;
      Do you accept default locations during install?
      Have you tried running it in compatibility mode (something like XP SP3)?
      Have you tried running the program as an administrator?

      My thoughts are that it tries to access something, location or control
      that Windows 7 UAC does not permit.

      If your V2 beta is reporting out of date that is fixed by getting the
      current one but obviously V2 does not have external radio control
      implemented yet.


      On 01/05/2013 18:11, kh2br wrote:
      > the specific error I am getting is:
      > SDRConsole.exe caused ACCESS_VIOLATION in module "C:\Program Files (x86)\SDR-RADIO.com\SDRConsole.exe" at 0023:00428540
      > I removed version 1.5 and version 2
      > I found a old beta version from year 2011
      > I installed that version and enabled only the external radio control.
      > I did not start the sdr radio.
      > on the external radio control I enabled mute on TX
      > Result= no crash... worked just fine. could tx with out a crash.
      > that beta will not play the sdr radio because the license is expired.
      > radio control works good.
      > installed v1.5 beta 1068 and when I enable mute on tx, when I key the cw key, Result = Crash with the following error message.
      > SDRConsole.exe caused ACCESS_VIOLATION in module "C:\Program Files (x86)\SDR-RADIO.com\SDRConsole.exe" at 0023:00428540
      > I removed all of sdr-radio files and also those in
      > C:\Users\Simon\AppData\Roaming\SDR-RADIO.com
      > Same problem all over again. This is a very stubborn problem and
      > I think I need some help, I dont know what else to do.
      > Robert KH2BR
      > --- In sdr-radio-com@yahoogroups.com, "kh2br" <rholsti@...> wrote:
      >> That did not last long, the problem is back again. This time I saw a error message and it says..
      >> " windows mfc application is not working"
      >> the computer is windows 7
      >> Robert KH2BR
      >> --- In sdr-radio-com@yahoogroups.com, "kh2br" <rholsti@> wrote:
      >>> I FIXED IT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      >>> :) :) :) :)
      >>> --- In sdr-radio-com@yahoogroups.com, "kh2br" <rholsti@> wrote:
      >>>> My joy has run out. I dont know what I did to mess my sdr software up but tried to solve my problem and ran out of ideas.
      >>>> The main rig is a FT-950 and sdr radio is a fifi sdr.
      >>>> main rig is connected to com-1
      >>>> external Radio frequency control works fine.
      >>>> when tx mute is not selected and I transmit, all is fine.
      >>>> when TX Mute "IS" selected and I transmit, I get a crash.
      >>>> Restored computer to a earlier date.. no fix.
      >>>> removed, and replaced sdr-radio program, no fix.
      >>>> com port, radio and sdr-radio program settings match.
      >>>> Put radio on a dummy load, same problem.
      >>>> removed other stuff connected to the computer, still no fix.
      >>>> When it crashes, I get a please wait box.
      >>>> I turned the power down to 5 watts, that did not fix it so rf is not getting in.
      >>>> Are there any hidden files that I need to remove?
      >>>> Any and all help apprecieated.
      >>>> Robert KH2BR
      > ------------------------------------
      > - - -
      > DX Cluster: http://dxcluster.ham-radio.ch/Yahoo! Groups Links
    • Show all 20 messages in this topic