Loading ...
Sorry, an error occurred while loading the content.

13432RE: [sdr-radio-com] Data Analyser Noise burst and other quirks

Expand Messages
  • Guido Schotmans
    Feb 1, 2013
    • 0 Attachment
      Huh ?  1110 kHz is the centre freq, not the upper freq. So 1110-600=510 kHz

      Van: sdr-radio-com@yahoogroups.com [mailto:sdr-radio-com@yahoogroups.com] Namens D. Visser
      Verzonden: vrijdag 1 februari 2013 1:31
      Aan: sdr-radio-com@yahoogroups.com
      Onderwerp: Re: [sdr-radio-com] Data Analyser Noise burst and other quirks



      Yr project start is wrong.
      You have a bw of 1200 khz and mid freq of 1110
      Thats impossible...so below zero

      David Visser

      Verzonden vanaf Iphone

      Op 31 jan. 2013 om 11:50 heeft "Guido Schotmans" <guidoschotmans@...> het volgende geschreven:


      Hello Simon,
      Here is the second case about the File Analyser.
      Picture 1b gives the settings of the loaded project
      Picture 2b gives the result when clicking with the player cursor in the waterfall : Player frequency is not updated
      Picture 3b another click in the WF. Everything OK
      Picture 4b : click further upward in the WF. The whole spectrum becomes one noise bulb. It happens everywhere in that time region. Not only with clicking but also with Fast Forward of the player, but when starting play back at the beginning of the file and don't touch it anymore and everything goes well.
      Picture 5b : clicking very near to the end of the file in the upper part of the WF causes the player to stop.  Clicking again in lower parts doesn't work anymore. You have to click on the stop button of the player to get it working again.

      Geen virus gevonden in dit bericht.
      Gecontroleerd door AVG - www.avg.com
      Versie: 2013.0.2897 / Virusdatabase: 2639/6070 - datum van uitgifte: 01/31/13

    • Show all 3 messages in this topic