Loading ...
Sorry, an error occurred while loading the content.

1389Re: [sawsmith] Re: Looking for a Motor

Expand Messages
  • kevin hammill
    Nov 13, 2011
    • 0 Attachment
      Hey;
       
      I spent time looking at the saw yesterday.  I used a new 20 amp breaker with a 10 foot 14x3 gauge copper.  I didn't have any 12 guage.  
       
      I by-passed the switch as well.
       
      If the motor is free from the lower pulley assembly is will reach intended rpm's.  I'm guessing. 
       
      When I put the belt on the motor and the lower shaft without a pulley on the lower shaft.  The motor trips the breaker.
       
      I going to bring the motor in to a repair shop.
       
      Kevin

      --- On Sun, 11/6/11, grandpadon47 <grandpadon47@...> wrote:

      From: grandpadon47 <grandpadon47@...>
      Subject: [sawsmith] Re: Looking for a Motor
      To: sawsmith@yahoogroups.com
      Date: Sunday, November 6, 2011, 12:05 PM

       
      Kevin: Did you get your saw fixed? Just wondering. I bought another brown one yesterday pluged it into a 25 foot orange extention cord. It started right up. I thought about you and decided to ask. just wondering. grandpadon in Missouri

      --- In sawsmith@yahoogroups.com, kevin hammill <kevin4150@...> wrote:
      >
      > Thanks
      >  
      > I'm going to dig into this weekend.  Using all the suggestions.  I have replaced the bearings which was one suggestion.
      >  
      > Kevin
      >
      > --- On Tue, 10/18/11, DON WATTS <djwatts9@...> wrote:
      >
      >
      > From: DON WATTS <djwatts9@...>
      > Subject: [sawsmith] Re: Looking for a Motor
      > To: sawsmith@yahoogroups.com
      > Date: Tuesday, October 18, 2011, 1:03 AM
      >
      >
      >
      >  
      >
      >
      >
      >
      > You have received some good suggestions.  My 2 cents worth. 
      >  
      > 1.  Try a different receptacle.
      > 2.  The breaker could be faulty; it happens.
      >

    • Show all 20 messages in this topic