Re: [rootsradicals] Rack stuck in Free Radical frame
- I can make two suggestions. Oil of wintergreen, which you can get from a
pharmacy and heat. I learned about oil of wintergreen from an old
machinist. It's better than most penetrating oils. From boating I learned
that heat helps. Use a small torch and heat for a while, take the heat
away and apply something like WD-40. Work the joint/bolt and repeat. If
you do it several times, it will usually work loose. You don't need to get
the metal red hot. It doesn't have to get hot enough to peel paint. The
point is to make the metal expand and contract, to break the corrosion
free. I would recommend using anti-seize on the parts, after you get them
apart. You can get it at auto parts stores. Don't use it on anything that
must stay tight by friction, like a seat post bolt. I made that mistake
once. Had to take everything apart and clean the anti-seize out. The bolt
would not remain tight and my seat would tilt while riding.
> I used my Free Radical heavily during the last winter and
> now for the first time in ~10 months wanted to remove the
> racks to do some maintanance on my bicycle.
> Unfortunatly the water and salt removed all the
> lubricant i put in the vertical tubes into which
> the rack slides in.
> The rack is stuck solid within the free radical.
> There is some whitish "rust" and neither MoS nor
> WD-40 could help.
> So basically im stuck here.
> Thankfull for every hint/comment