Re: Towing bikes with xtracycle
- Good information David. Thanks, I'll keep an eye on it. Thankfully I'm a tad under 200lbs but it does have a rather heavy electric hub wheel and a bunch of heavy batteries in back.
Oddly, I was just talking to someone looking to unload a pugsly fork and I was considering the swap. I think I'll get it just "in case". At least that's how I'll justify to the wife that I need to spend more money on bikes :)
I'm waiting for the side car too. My goal is 3 sets of batteries so I can comfortably ride to the Midwest Renewable Energy Fair next spring with all my camping gear and such. It's about 150 miles and hilly.
--- In firstname.lastname@example.org, dr2chase@... wrote:
> On 2012-10-25, at 7:50 AM, anthonyeberger <anthonyeberger@...> wrote:
> > Than again, I'm also the weirdo riding my Xtra with a front suspension fork which many think is a no no too :)
> Eventually, it is a no no. I wore mine out quite a lot after just a few years, which is what precipitated the Big D upgrade. Donor bike was reassembled and rebuilt to best of ability and sold for small $ to a much lighter person (with a warning about the fork -- it wasn't unusable, just getting old fast under my use) and sold the FreeRadical to someone on this list.
> The thing I am coming to appreciate more and more is that (modern) bicycles really are not much overbuilt, which is why you need to keep an eye on that fork; the longer wheelbase adds a lot to the load on the front wheel. And if you already weigh over 200lbs, and drive on our wonderful Northeastern roads....
- I was thinking the same thing - although it may need to be a polymer plank so as not to scratch wheel / fork and maybe a cut out for any disc brake haulage?
How would you secure the planks - drill into the aluminium?
- Drill through the wood on the inside of the wideloader bar and thread stainless steel hose clamps (or zip ties) through and around the wideloader bar. Or, on the bottom of the board use the little clamps used to mount pipe or conduit to a wall.
- How does the Yuba Mundo avoid having a towed bikes fork, stem,
handlebar, etc. rub or bump against the long tail framing? From the
photos it looks like there is some sort of narrow black plastic bumper
screwed horizontally to the long tail framing, but I do not see how it
alone prevents the towed bike from leaning away from the hauling bike. I
would imagine tie-downs of some sort must be needed to restrain the bike
against the long tail framing, which is why that plastic strip is
necessary as protection between the two bikes.
According to the photos, I would not think it would be too hard at all to
make a similar track-slot for an Xtracycles wide loaders. Someone
mentioned just attaching planks with cut out slots in them across the top
of the wide loaders. I do not think that would even be necessary. You
might be able to get away with just using two lengths of conduit or bars
between the front and back tubing of the wide-loaders separated by a
space, which would be the width of the tire you want to slip through.
Along the bars you would drill in adjustment holes to screw in a front
bumper for the appropriately diameter wheel(s) you intend to haul. The
rear tubing of the wide-loader would function as the back bumper of the
slot. The only major concern to this idea would be the possible need to
include some kind of padding or soft bumper system so that the tire rim
and/or spokes do not rub against the metal of the bars you use on either
side of the slot.