Loading ...
Sorry, an error occurred while loading the content.

13663Re: [rootsradicals] Re: Disc rotor

Expand Messages
  • ray marko
    Sep 19, 2011
    • 0 Attachment
      so 180/185 ? I don't think I need to go so big as 220,
      I just want it to fit...( and stop in weather or not ) 
      thanks for the input ...
      ~m

      On Mon, Sep 19, 2011 at 9:43 PM, Mark Brenner <raymarko@...> wrote:
      On a free rad if I didn't mention...

      ~marko

      On Sep 19, 2011, at 21:24, "Rich W" <astronut1001@...> wrote:

       

      On what bike?

      Disk rotor size required is typically dependent on the caliper mount/adapter that is used to install the disc caliper on the fork. I have read of Big Dummys using front calipers from 160mm to the 203mm size depending on the parts used to install the disc brake calipers.

      A quick measurement from the center of the wheel axle line to the top of the slot in the caliper should give you the maximum rotor radius then multiply x2 to get the diameter you need.

      Rich Wood

      --- In rootsradicals@yahoogroups.com, Mark Brenner <raymarko@...> wrote:
      >
      > What's the correct size? 160 mm is to small...
      >
      > ~marko
      >


    • Show all 12 messages in this topic