Loading ...
Sorry, an error occurred while loading the content.

putty & ftp not working

Expand Messages
  • Mohana sundaram Palanisamy
    hai friends,    i have a single pc with windows xp. after that i installed vmware 5 and i installed rhel 5 in the vmware.     i connected the linux in the
    Message 1 of 3 , Sep 24, 2010
    • 0 Attachment
      hai friends,
       
       i have a single pc with windows xp. after that i installed vmware 5 and i installed rhel 5 in the vmware.
       
        i connected the linux in the windows through putty. it didn't work, and i acces the file through ftp, it also didn't work.
       
       i configured the briged network when the vmware was installed. but one think i have no hub, switch and the network cable.
       
       is there any possibilities to access the both this without connect switch,hub, lan and network cable?.

      with regards..

      Mohana sundaram Palanisamy



      [Non-text portions of this message have been removed]
    • varughese_tonu
      Hi.... You have done everything correctly...viz network in bridge mode... etc.. ... Hope you know how to assign and IP address in Linux(using setup or neat
      Message 2 of 3 , Sep 24, 2010
      • 0 Attachment
        Hi....

        You have done everything correctly...viz network in bridge mode... etc..

        >>>You need to do one thing and that is you have to disable to virtual network cards from the Network window.

        >>>Then give your host machine an IP address and also provide IP address to the Virtual OS(linux) in the same range.(eg: 192.168.1.1 & 192.168.1.2).

        Hope you know how to assign and IP address in Linux(using setup or neat command)

        Now... you are all set to access your virtual machine using Putty(ssh)

        Please get revert with the details if it does not works..


        Tonu Varughese


        --- In redhat@yahoogroups.com, Mohana sundaram Palanisamy <msundaramgroups@...> wrote:
        >
        >
        > hai friends,
        >  
        >  i have a single pc with windows xp. after that i installed vmware 5 and i installed rhel 5 in the vmware.
        >  
        >   i connected the linux in the windows through putty. it didn't work, and i acces the file through ftp, it also didn't work.
        >  
        >  i configured the briged network when the vmware was installed. but one think i have no hub, switch and the network cable.
        >  
        >  is there any possibilities to access the both this without connect switch,hub, lan and network cable?.
        >
        > with regards..
        >
        > Mohana sundaram Palanisamy
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >
      • Ahmed Sharif
        On Fri, Sep 24, 2010 at 8:55 PM, Mohana sundaram Palanisamy
        Message 3 of 3 , Sep 24, 2010
        • 0 Attachment
          On Fri, Sep 24, 2010 at 8:55 PM, Mohana sundaram Palanisamy <
          msundaramgroups@...> wrote:

          >
          >
          > hai friends,
          >
          > i have a single pc with windows xp. after that i installed vmware 5 and i
          > installed rhel 5 in the vmware.
          >
          > i connected the linux in the windows through putty. it didn't work, and i
          > acces the file through ftp, it also didn't work.
          >
          > i configured the briged network when the vmware was installed. but one
          > think i have no hub, switch and the network cable.
          >
          > is there any possibilities to access the both this without connect
          > switch,hub, lan and network cable?.
          >
          > with regards..
          >
          > Mohana sundaram Palanisamy
          >
          > [Non-text portions of this message have been removed]
          >
          >
          > ,_._,___
          >

          It seems you don't have any network connectivity in your windows machine. In
          that case you should change the vmware network settings to "Host-Only".
          After that you should check the IP address assigned to the VMnet1 network
          adapter of your windows machine, then assign an IP address of the same block
          to your guest OS (RHEL5 in this case). It should work now.

          there are three types of network settings in vmware. Bridge, NAT and
          Host-Only. Try to learn the purpose of each and then you can figure out what
          is perfect for you.

          Thanks
          Ahmed Sharif


          [Non-text portions of this message have been removed]
        Your message has been successfully submitted and would be delivered to recipients shortly.