Prime numbers and primality testing is a Restricted Group with 1118 members.
 Prime numbers and primality testing

 Restricted Group,
 1118 members
Re: [PrimeNumbers] just a question...
Expand Messages
 anyone can see that if n^2 +m^2 is prime, then 'n' is even and 'm' is odd, but not both and not neither.
you can plainly see that 'n' even and 'm' even would immediately make the sum even; so the answer
to your question is... no, a smart mathematician would not even suggest the even/even case; (even)^2
is only (even) and the sum of two such things would be even; the same is true of (odd)^2 + (odd)^2;
I'm sure that you can visualize that conclusion; also, if the sum is not prime, then it can be shown
that the sum would contain a unique prime factor 'r' such that p(k) < r < (p(k))^2, and the other would
then have to be 'q' such that q > (p(k))^2. enjoy! so the idea is very, very valid; we can discriminate
the values of 'n' and 'm' very easily. *qed
 Original Message 
From: Chris Caldwell <caldwell@...>
To: leavemsg1 <leavemsg1@...>
Cc: primenumbers@yahoogroups.com
Sent: Fri, April 9, 2010 10:38:35 AM
Subject: RE: [PrimeNumbers] just a question...
> if Hardy and Wright proved that there are infinitely many primes of
the form n^2 +m^2 and n^2 +m^2 +1,
> then isn't n^2 +1 just a 'particular' of the earlier form, written as
n^2 +1^2.
First, it was Fermat who showed p = n^2+m^2 if and only if p is 1 (mod
4), not Hardy and Wright; and since we
can easily show there are infinitely many such primes p....
Second n^2 + 1 is subcase of n^2+m^2, but that is the wrong direction.
(2a)^2+(2b)^2 is also a subcase,
so should it follow that there are infinitely many primes of that form
too?
So there is nothing salvable in that old discussion.
CC   In primenumbers@yahoogroups.com,
Bill Bouris <leavemsg1@...> wrote:
> anyone can see that if n^2 + m^2 is prime,
That was, of course, precisely the point made sagely by Chris.
> then 'n' is even and 'm' is odd,
> but not both and not neither
You seem, Bill, to be able to appreciate part of the sense of
Chris's point. Yet you still seem not to be able to abandon
your foolish claim that an infinity of primes of the form
"n^2 + m^2" proves an infinity of primes of the form "n^2 + 1".
Please do abandon it and then we can all go back to sleep.
David  In other words, it is proven that there are infinetily many primes of the form n^2+m^2 but not for a determined n or m
[Nontext portions of this message have been removed]  Robin Garcia: In other words, it is proven that there are infinetily
many primes of the form n^2+m^2 but not for a determined n or m
Yes. When you fix either n or m, then you make the set a lot thinner
(a much smaller set). The smaller the set, the harder it is to show it
contains infinitely many primes. For example, it is easy to show
n^2+m^2 has infinitely many primes, n^2+m^4 is much harder, and n^2+1 is
currently beyond our reach.
Chris.
(Here "smaller" is often measured in the sense of natural densities,
what percentage of them have this form less than x as x gets large.
They are all countably infinite, so have a onetoone correspondences.)  Greetings all,
Can someone please help with validating if the following 62digit number is a prime or not:
11108195956680805165653650502135350605769090617575464617311659
I am aware of IsProbablePrime but need a definite primality test.
If I have to run the primality test on my machine then how do I get a rough estimate of the time it would take on say 2.33GHz QuadCore Intel CPU with 4Gb RAM? Even to the nearest month would be useful to know before I start the run.
Thank you all,
Ali
www.heliwave.com
[Nontext portions of this message have been removed]  using PARI/gp,
? ?isprime
isprime(x,{flag=0}): true(1) if x is a (proven) prime number, false(0) if not. If flag is 0 or omitted, use a combination of
algorithms. If flag is 1, the primality is certified by the PocklingtonLehmer Test. If flag is 2, the primality is certified
using the APRCL test.
? isprime(11108195956680805165653650502135350605769090617575464617311659,1)
%11 =
[2 2 1]
[37 2 1]
[47 2 1]
[283 2 1]
[79539191 2 1]
[134903310001 2 1]
?
M.
 In primenumbers@yahoogroups.com, Ali Adams <alipoland@...> wrote:
>
> Greetings all,
> ï¿½
> Can someone please help with validating if the following 62digit number is a prime or not:
> ï¿½
> 11108195956680805165653650502135350605769090617575464617311659
> ï¿½
> I am aware of IsProbablePrime but need a definite primality test.
> ï¿½
> If I have to run the primality test on my machine then how do I get a rough estimateï¿½of the time it would take onï¿½say 2.33GHz QuadCore Intel CPU with 4Gb RAM? Even to the nearest month would be useful to know before I start the run.
> ï¿½
> Thank you all,
> ï¿½
> Ali
> www.heliwave.com
>
>
>
>
> [Nontext portions of this message have been removed]
>  Greetings ,
UBASIC , running the supplied primality test , APRTCLE , on
an 11yearold Pentium II at 266MHz , produced this output :
11108195956680805165653650502135350605769090617575464617311659 is prime.
0:00:04
4 seconds on the wall clock .
Without experience running these programs , it is difficult even
to ballpark run times .
As you become more experienced , it will become easier .
It would help if someone would collect experience from people
and organize it .
Even isolated cases would be somewhat helpful .
I don't know if there is a textbook that gives recent info .
Some web sites have some data , but how can they be located ?
Cheers ,
Walter
http://upforthecount.com  Thanks Walter for your help.
What about this 309digit number?
259336006801222696014182798990654577020329185417451253947966996203374778056958592994128470622708352120230964321433370545343196089458222530238878359827583627468563462233210398589090852507947007265127498998595582306765369537411175275870858814651979141558307396316154291312142703185675301452916463755740936626397
How do I estimate how long it would take?
And even if after few days/weeks the result is prime.
What is the meaning of the certificate to be validated by other programs mean?
Is there still a chance that it is not 100% prime?
Is the Elliptic Curve Method approximate?
Sorry for so many questions and thanks in advance.
Ali Adams
God > infinity
www.heliwave.com
________________________________
From: Walter Nissen <nissen@...>
To: Ali Adams <alipoland@...>; primenumbers@yahoogroups.com
Cc: nissen@...
Sent: Fri, April 23, 2010 10:44:14 AM
Subject: Re: [PrimeNumbers] 62digit IsPrime
Greetings ,
UBASIC , running the supplied primality test , APRTCLE , on
an 11yearold Pentium II at 266MHz , produced this output :
11108195956680805165653650502135350605769090617575464617311659 is prime.
0:00:04
4 seconds on the wall clock .
Without experience running these programs , it is difficult even
to ballpark run times .
As you become more experienced , it will become easier .
It would help if someone would collect experience from people
and organize it .
Even isolated cases would be somewhat helpful .
I don't know if there is a textbook that gives recent info .
Some web sites have some data , but how can they be located ?
Cheers ,
Walter
http://upforthecount.com
[Nontext portions of this message have been removed]  Hi All,
Walter Nissen wrote:>UBASIC , running the supplied primality test , APRTCLE , on
I also use that program for numbers below 250 digits. I have modified
>an 11yearold Pentium II at 266MHz , produced this output :
it to run in batch mode: an input file has the serial number (from my
database) of the PrP and the PrP itself, one per line. The output file
has the same serial number followed by "P" for prime, "C" for composite
or "U" for undetermined (this last has never happened). If anyone is
interested, I will happily email them the code.
>Without experience running these programs, it is difficult even
I have over 100,000 data points for the Ubasic code but they are of no
>to ballpark run times.
use for statistics as I do not record which processor did the run and
the code does not usually run with exclusive use of the CPU.
For larger PrPs, I (and almost everyone else) use Primo, available from
http://www.ellipsa.eu/public/primo/primo.html
I have collected stats on around 2600 runs of Primo. For estimating
purposes I use the data from the 64 largest primes I have proved with
the latest major release (all 3.x versions). Currently:
Let K = Kilo Digits = (Base 10 log of input number) / 1000
Let G = GigaHertz * Days
Then G = 0.0346 * (K ^ 4.49)
Those stats are based on inputs from about 3000 to 7400 digits. For small
inputs, this estimate (0.01 GHz seconds for the 62 digit input) is swamped
by overhead.
HTH,
Andy  It can't be prime because it's not pseudoprime.
I suggest you install PARI/gp (done in less than a minute)
and do such preliminary checks prior to posting in this group.
Maximilian
 In primenumbers@yahoogroups.com, Ali Adams <alipoland@...> wrote:
>
> Thanks Walterï¿½for your help.
>
> What about this 309digit number?
>
> 259336006801222696014182798990654577020329185417451253947966996203374778056958592994128470622708352120230964321433370545343196089458222530238878359827583627468563462233210398589090852507947007265127498998595582306765369537411175275870858814651979141558307396316154291312142703185675301452916463755740936626397
>
> How do I estimate how long it would take?
> ï¿½
> And even if after few days/weeks the result is prime.
> What is the meaning of the certificate to be validated by other programs mean?
> ï¿½
> Is there still a chance that it is not 100% prime?
> ï¿½
> Is the Elliptic Curve Method approximate?
> ï¿½
> Sorry for so many questions and thanks in advance.
> ï¿½
> Ali Adams
> God > infinity
> www.heliwave.com
>
>
>
>
> ________________________________
> From: Walter Nissen <nissen@...>
> To: Ali Adams <alipoland@...>; primenumbers@yahoogroups.com
> Cc: nissen@...
> Sent: Fri, April 23, 2010 10:44:14 AM
> Subject: Re: [PrimeNumbers] 62digit IsPrime
>
> Greetings ,
>
> UBASIC , running the supplied primality test , APRTCLE , on
> an 11yearold Pentium II at 266MHz , produced this output :
>
> 11108195956680805165653650502135350605769090617575464617311659 is prime.
> ï¿½ 0:00:04
>
> 4 seconds on the wall clock .
> Without experience running these programs , it is difficult even
> to ballpark run times .
> As you become more experienced , it will become easier .
> It would help if someone would collect experience from people
> and organize it .
> Even isolated cases would be somewhat helpful .
> I don't know if there is a textbook that gives recent info .
> Some web sites have some data , but how can they be located ?
>
> Cheers ,
>
> Walter
> http://upforthecount.com
>
>
>
>
> [Nontext portions of this message have been removed]
>  The next prime number is your number+334
N=...626731
PRIMO takes 6,25s to create a certificate.
Best
Norman
[Nontext portions of this message have been removed]  On 04/21/2010 09:01 PM, Ali Adams wrote:
> Greetings all,
(in another posting, asked)
>
> Can someone please help with validating if the following 62digit
> number is a prime or not:
>
> 11108195956680805165653650502135350605769090617575464617311659
>
> I am aware of IsProbablePrime but need a definite primality test.
> What about this 309digit number?
(Which is not even probableprime, as one single strong pseudoprime
>259336006801222696014182798990654577020329185417451253947966996203374778056958592994128470622708352120230964321433370545343196089458222530238878359827583627468563462233210398589090852507947007265127498998595582306765369537411175275870858814651979141558307396316154291312142703185675301452916463755740936626397
test shows.)
I'm about to sermonize, so be prepared, my brothers and sisters.
Whenever someone says they "need" a definite primality test, they, by
their actions, usually prove that they don't understand that a
primalityproving test, by itself, is not an infallible proof of
primality (in the real world) and they rarely if ever do the correct
thing to decrease the probability of error, giving them a result that's
effectively no more certain than a working pseudoprime test (and, by
probabilities and failure modes that I'll cite here, probably quite a
bit weaker. And by "quite a bit" I mean 20 orders of magnitude, easy.)
Note: Keep in mind that all of this analysis applies in the *real
world*, not to some perfect, fictitious mathematical abstraction where
programmers don't make errors and hardware never fails and you can
ignore most algorithms and divide out big pesky constants because the
ideal theoretical asymptotic performance is always what you get when you
run programs.
It is simple to implement and perform a strong pseudoprime test in
which the probability that a randomlychosen composite number is
mistakenly stated to be prime is so low that it would never happen in
your lifetime.[1] Not only that, you can trivially make the probability
of this mistake so low that you could test trillions of numbers every
second for the lifetime of the universe, and the probability of *any* of
those tests failing are still astronomically low, and that's even taking
the old ultraconservative bound that as many as 1/4 of strong
pseudoprime tests can fail. See citations in the link below for numbers
about how conservative that estimate really is.
Many people have pointed out over the years that the probability that
your *hardware* or *software* fails (say, due to a highenergy particle
passing through your processor, or random thermal drift of electrons[2],
or a bad transistor) during your primality test or primality "proof"
becomes rapidly much, much higher than the probability that, say, a
RabinMiller test incorrectly declares a composite to be prime.
Depending on the size of the number, this is true *even if you only do
one pass of a RabinMiller test*, and the probability of error in the
algorithm is far less than the probability of hardware failure, possibly
by hundreds or thousands of tens of thousands of *orders of magnitude*!
It may also be far, far more probable that the number you meant to
test or the reply (with certificate) was corrupted during communication
with someone else. For example, TCP only has a 16bit checksum, and can
miss, say, two singlebit errors separated by 16 bits, for a possible
undetected error rate of 2^16, or 1/65536 in a noisy channel. (Other
errorcorrecting algorithms apply to communication across the internet,
and most channels have fairly good s/n ratios so the endtoend
probability of error is luckily usually lower than this.)
There's also the probability that Yahoo does something stupid with
the long line and cuts off a digit or something. (Some would say the
probability of Yahoo's software doing something stupid when adding their
cruft to a posting is 1, but that's being mean. Their software isn't
really that bad. The probability is actually 1epsilon.)
To see approximate probabilities of the RabinMiller test failing
for certain number sizes, even with a *single* round of tests, see:
http://primes.utm.edu/notes/prp_prob.html
Those probabilities of failure, especially for large numbers, are
mindbogglingly small! Far smaller than the probability of some other
source of error.
Note that for the 309digit number posted above, the probability of a
strong pseudoprime test mistakenly returning "prime" for a composite
number is less than 5.8*10^29. Is that probability higher than other
probabilities we've already listed? (And note that since a strong
pseudoprime test easily catches that the number is actually composite.
No matter what base you choose. I'm sure that many here wouldn't
hesistate to give a cash reward for anyone who can find *any* prime base
smaller than the number for which a strong pseudoprime test fails. I
will initially offer all the money in my wallet. And I haven't even
tried to look for one. I'm that confident in the probabilities, or my
wallet is at its usual sad level.)
It's hard to approximate the probability that a particular piece of
software or hardware or communication will fail, but you can never
expect your primality "proof" to be any stronger than the most likely
error in the chain.
If you really *need* a prime number, you *must* then be sure to take
the certificate produced by one program's prime number proof *and verify
this certificate*, presumably with different software on a different
machine and hardware architecture! (I feel I should repeat this
sentence many times!) And then verify it again with another piece of
software! If you *don't* do this, the probability that the primality
"proof" is in error is approximately the probability of the thing most
likely to go wrong in the entire chain. (Again, maybe cosmic rays,
software bugs, Pentiums, race conditions in software, power glitches,
probability of human error, etc.) The primality certificate gives you a
way of verifying (without performing the whole proof again) that the
proof is indeed valid for that number.
However, there's nothing that prevents even the *verification* of the
certificate from having a similar unlikely failure! (Or similar
implementation bugs.)[3] Assuming the implementations and hardware are
completely independent, the best you can do is to multiply the
probability of failure in both systems. Thus, if the probability of
failure in each system independently is 10^32, then the probability
that *both* fail completely independently but in a way that gives the
same flawed result is at best 10^64. Look at the URL cited above and
compare that to the probability of a probableprime test failing. Is it
larger or smaller? If the probability is larger, the likelihood of your
"proof" being better than a pseudoprime test is purely illusory.
I'm not sure what the exact failure probability for a single
instruction is in modern hardware, but it's almost certainly *not*
better than 10^32. (Multiply this by the number of instructions
required to perform the calculation.)
One of the best sources of information I've seen about actual failure
rates in installed hardware was done by the SETI@Home team, (which had
the world's largest distributed supercomputer at some points) which
cited detected error rates in returned work units (each work unit was
given to at least two people for validation, so errors could be
detected.) I don't remember the exact numbers, but the actual failure
rate appeared to be many, many orders of magnitude lower than 10^32. I
don't seem to be able to find these stats at the moment. Does anyone
have the link?[4]
If you haven't verified a primality certificate independently to
decrease your probability of hardware or software error, (and there is
*always* a nonzero probability of error on real physical hardware and
where humans are involved, even in a primality "proof") you're likely
not doing any better than a probabilistic prime test, in which the
unreliability of hardware, software, communications, and humans, rapidly
become the limiting factors.
You're also much more likely that some random mischiefmaker will say,
"sure it's prime" when it's not because they're annoyed with you for not
doing these simple tests yourself, and for refusing to take advice on
tools that will do the work for you. But if people didn't refuse to
listen, I wouldn't get a chance to gratuitously sermonize.
If you didn't verify the primality certificate as many ways as
possible, you clearly can't claim you understand that you "need" a prime
number, and don't really understand the probability of all the different
ways that failure could have occurred. Do you even know that the
primality certificate that was posted here was valid for the number you
gave, or did someone maybe miss the last digit digit during
cutandpaste? Do you even know that the certificate was anything but a
cat walking across a keyboard? The probability that *you*
cutandpasted the number incorrectly is orders of magnitude higher than
probability of failure of a pseudoprime algorithm.[5]
Homework: 1.) Can anyone else estimate probabilities of certain
types of errors? What do you think are the probabilities of various
failure modes in posting "prove this number prime for me" to a public
group? Do any of those probabilities exceed that of failure of a
probabilistic test? (Hint: The answer is yes.)
2.) Even if you get a provable prime number handed down impeachably
from the ghost of Fermat, what's the probability that when you're
*using* this prime number that something goes wrong in those
calculations? (Hint: Weakest link in the chain.)
================
Footnotes:
[1] I intentionally state "randomlychosen" because there are ways
to generate a very sparse set of numbers that can fool one of these
tests if you know in advance the bases it's going to test, which is why
most RabinMiller tests choose some bases randomly if there is the
potential for adversarial assault. See, for example:
François Arnault, Constructing Carmichael numbers which are strong
pseudoprimes to several bases, Journal of Symbolic Computation, v.20
n.2, p.151161, Aug. 1995
[2] There's a certain nonzero probability that an electron will go
"the wrong way" and potentially tunnel "backwards" through a potential
barrier. As voltages used in processors get lower, and as gates get
smaller and the number of electrons required to switch a gate get fewer,
this becomes increasingly more probable. (I don't have my "Feynman
Lectures on Computation" at hand or I'd post some equations for this
probability. Very highly recommended!
http://tinyurl.com/9q4p8o )
[3] Multiple programmers creating similar software bugs is more
common than you might think. Sun's Java implementation had a famous bug
in their calculation of the Jacobi symbol, which caused
primalitytesting routines to fail:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4624738
When I implemented a function to calculate the Jacobi symbol in my
Frink programming language ( http://futureboy.us/frinkdocs/ ) I
initially created a similar bug, because my algorithm didn't work for
some negative numbers either. I didn't use Sun's algorithm, but I can
see how they went wrong. The algorithm often cited on the web, in
several number theory books, etc. needs preconditioning to handle
negative numbers correctly. Even more insanely, when evaluating
negative numbers, Java uses different sign conventions for the %
(modulus) operator (used for "int" values) and the BigInteger.mod(n)
function! It's easy to see how Sun even confuses their own programmers.
This bug in Sun's implementation caused some significant pain. Their
primality testing was originally a probabilistic RabinMiller test (with
probabilities that can easily be set that it won't return a wrong result
during the lifetime of the universe, and many users set them *way*
higher than that to be very safe) yet that bug caused failures much more
often, and introduced a method of failure that RabinMiller *can't*
produce, (RabinMiller can't ever declare a prime to be composite, but
it can, very rarely, declare a composite to be probably prime,) which is
why this failure mode was particularly unexpected to a lot of people,
and caused numbers above a certain size to fail mysteriously and
sporadically.
Note: When I was informed of this bug in my implementation of my
JacobiSymbol[x] function, (it didn't affect my primality testing, which
has always worked properly,) I was ashamed that I wasn't able to release
a fix until I got home from work later that day. Sun, on the other
hand, took *3 years* to release a fix. (This bug was present in Java
versions 1.3 through 1.4.2.)
[4] Of course, some of their "failures" were due to intentional
attempts of people to corrupt their results, so exact probabilities of
failure are impossible to come by. There were interesting stories,
though, of *all* or *almost all* of the work units returned by several
wellmeaning participants returning incorrect results. The SETI team
contacted these people and were able to verify that their computers'
floatingpoint units were indeed failing. (Sometimes subtly enough to
not make everything crash, but enough to make all extended calculations
wrong.) This is interesting and probably indicates that the frequency
of subtly or explicitly broken processors in the world is far less than
10^9, setting a bound for what reliability we might expect for
primality testing.
[5] Don't laugh. This happened on this very list. A few years ago,
an intrepid researcher stated that they had been running a computer for
3+ years to find the factors of one of the RSA factoring challenge
numbers. Awesome persistence! And then one day it beeped! (I can't
imagine the excitement!) He announced to this list that he had
submitted his solution to RSA and was awaiting confirmation of the
factors, and he wasn't sure if the numbers were factors. I asked him
the obvious question, "did you multiply the two factors together and did
they come up with the original number?" The next day, with a leaden
heart, he responded to me and indicated that he had accidentally cut off
a digit when pasting in the original RSA number to his factoring
program. It still hurts me to think about it.

Alan Eliasen
eliasen@...
http://futureboy.us/  Alan Eliasen wrote:
> It is simple to implement and perform a strong pseudoprime test in
The below is largely my own speculation not based on careful research.
> which the probability that a randomlychosen composite number is
> mistakenly stated to be prime is so low that it would never happen in
> your lifetime.[1] Not only that, you can trivially make the probability
> of this mistake so low that you could test trillions of numbers every
> second for the lifetime of the universe, and the probability of *any* of
> those tests failing are still astronomically low, and that's even taking
> the old ultraconservative bound that as many as 1/4 of strong
> pseudoprime tests can fail. See citations in the link below for numbers
> about how conservative that estimate really is.
Your numbers apparently assume there are no hardware, software,
operator or other errors when the pseudoprime tests are performed.
But they can have the same type of errors as primality proofs.
In practice it seems more important to use independent reliable software
and hardware for the pseudoprime tests than to run a large number of them.
And if you both have pseudoprime tests saying composite and probable
prime on a large number then be extremely careful before claiming to have
proved compositeness.
Fast pseudoprime test programs may implement more complicated
algorithms with greater risk of programming error, and may be written
in assembler that tends to produce more errors for human programmers
(partly because of increassed source code size), so it may be better to
run a smaller number of pseudoprime tests with a slow simple program
than a large number with a fast program.
If you run the same type of pseudoprime test with multiple supposedly
independent programs then some things risk causing the same error,
for example:
An error in a text read by multiple programmers.
A systematic hardware error affecting operations likely to be performed
by different programs implementing the same algorithm.
A tricky part of the implementation which may fool multiple programmers.
An error in a software library or other routine used by multiple programs.
So it also seems a good idea in practice to use different types of
pseudoprime tests instead of many uses of the one with the best
theoretical accuracy.
If the same person makes many tests then a copyandpaste error
or lack of honesty, knowledge, intelligence, carefulness or other
human factors (some of them may affect yourself without your
knowledge) can make all tests invalid, so also get multiple people
to run tests.
In brief, if you want to increase the "real" chance that a number is
prime then I think you should bet more on independence of as
much as possible (software, hardware, algorithms, people, source
of the number), than on increasing the number of pseudoprime tests.
And aim for not only two independent of something but as many as
possible or practical.
However, in practice the negative consequences of an alleged prime
being composite are usually so small that I don't think people should
bother with all my advice (I don't myself).
Most large primes are just announced with no practical consequence
(except maybe to the reputation of you or the used software) if
somebody else proves them composite.
It will often be more important to an audience of an announced prime
that you say "Trusted program X proved primality" than you argue
about the microscopic risk that something went wrong in all the
pseudoprime tests.

Jens Kruse Andersen  Thank you for the reply Alan and advice taken well.
Here in China I don't have access to the PRIMO website and the one I am using now is http://www.alpertron.com.ar/ECM.HTM which says composite but still no prime factors out yet.
I am interested in either the number being a prime and then see if its digit sum is also prime (additve prime number). Alternatively if composite then the maths stop and the interpretation of the prime factors starts.
Thank you again for your advice and I am a software engineer and I know the weakest link :)
Salam,
Ali
God > infinity
________________________________
From: Alan Eliasen <eliasen@...>
To: Ali Adams <alipoland@...>; Prime Number <primenumbers@yahoogroups.com>
Sent: Sun, April 25, 2010 3:59:17 PM
Subject: [PrimeNumbers] Strong pseudosermon (was 62digit IsPrime)
On 04/21/2010 09:01 PM, Ali Adams wrote:
> Greetings all,
>
> Can someone please help with validating if the following 62digit
> number is a prime or not:
>
> 1110819595668080516 5653650502135350 6057690906175754 64617311659
>
> I am aware of IsProbablePrime but need a definite primality test.
(in another posting, asked)
> What about this 309digit number?
>259336006801222696 0141827989906545 7702032918541745 1253947966996203 3747780569585929 9412847062270835 2120230964321433 3705453431960894 5822253023887835 9827583627468563 4622332103985890 9085250794700726 5127498998595582 3067653695374111 7527587085881465 1979141558307396 3161542913121427 0318567530145291 6463755740936626 397
(Which is not even probableprime, as one single strong pseudoprime
test shows.)
I'm about to sermonize, so be prepared, my brothers and sisters.
Whenever someone says they "need" a definite primality test, they, by
their actions, usually prove that they don't understand that a
primalityproving test, by itself, is not an infallible proof of
primality (in the real world) and they rarely if ever do the correct
thing to decrease the probability of error, giving them a result that's
effectively no more certain than a working pseudoprime test (and, by
probabilities and failure modes that I'll cite here, probably quite a
bit weaker. And by "quite a bit" I mean 20 orders of magnitude, easy.)
Note: Keep in mind that all of this analysis applies in the *real
world*, not to some perfect, fictitious mathematical abstraction where
programmers don't make errors and hardware never fails and you can
ignore most algorithms and divide out big pesky constants because the
ideal theoretical asymptotic performance is always what you get when you
run programs.
It is simple to implement and perform a strong pseudoprime test in
which the probability that a randomlychosen composite number is
mistakenly stated to be prime is so low that it would never happen in
your lifetime.[1] Not only that, you can trivially make the probability
of this mistake so low that you could test trillions of numbers every
second for the lifetime of the universe, and the probability of *any* of
those tests failing are still astronomically low, and that's even taking
the old ultraconservative bound that as many as 1/4 of strong
pseudoprime tests can fail. See citations in the link below for numbers
about how conservative that estimate really is.
Many people have pointed out over the years that the probability that
your *hardware* or *software* fails (say, due to a highenergy particle
passing through your processor, or random thermal drift of electrons[2] ,
or a bad transistor) during your primality test or primality "proof"
becomes rapidly much, much higher than the probability that, say, a
RabinMiller test incorrectly declares a composite to be prime.
Depending on the size of the number, this is true *even if you only do
one pass of a RabinMiller test*, and the probability of error in the
algorithm is far less than the probability of hardware failure, possibly
by hundreds or thousands of tens of thousands of *orders of magnitude*!
It may also be far, far more probable that the number you meant to
test or the reply (with certificate) was corrupted during communication
with someone else. For example, TCP only has a 16bit checksum, and can
miss, say, two singlebit errors separated by 16 bits, for a possible
undetected error rate of 2^16, or 1/65536 in a noisy channel. (Other
errorcorrecting algorithms apply to communication across the internet,
and most channels have fairly good s/n ratios so the endtoend
probability of error is luckily usually lower than this.)
There's also the probability that Yahoo does something stupid with
the long line and cuts off a digit or something. (Some would say the
probability of Yahoo's software doing something stupid when adding their
cruft to a posting is 1, but that's being mean. Their software isn't
really that bad. The probability is actually 1epsilon.)
To see approximate probabilities of the RabinMiller test failing
for certain number sizes, even with a *single* round of tests, see:
http://primes. utm.edu/notes/ prp_prob. html
Those probabilities of failure, especially for large numbers, are
mindbogglingly small! Far smaller than the probability of some other
source of error.
Note that for the 309digit number posted above, the probability of a
strong pseudoprime test mistakenly returning "prime" for a composite
number is less than 5.8*10^29. Is that probability higher than other
probabilities we've already listed? (And note that since a strong
pseudoprime test easily catches that the number is actually composite.
No matter what base you choose. I'm sure that many here wouldn't
hesistate to give a cash reward for anyone who can find *any* prime base
smaller than the number for which a strong pseudoprime test fails. I
will initially offer all the money in my wallet. And I haven't even
tried to look for one. I'm that confident in the probabilities, or my
wallet is at its usual sad level.)
It's hard to approximate the probability that a particular piece of
software or hardware or communication will fail, but you can never
expect your primality "proof" to be any stronger than the most likely
error in the chain.
If you really *need* a prime number, you *must* then be sure to take
the certificate produced by one program's prime number proof *and verify
this certificate* , presumably with different software on a different
machine and hardware architecture! (I feel I should repeat this
sentence many times!) And then verify it again with another piece of
software! If you *don't* do this, the probability that the primality
"proof" is in error is approximately the probability of the thing most
likely to go wrong in the entire chain. (Again, maybe cosmic rays,
software bugs, Pentiums, race conditions in software, power glitches,
probability of human error, etc.) The primality certificate gives you a
way of verifying (without performing the whole proof again) that the
proof is indeed valid for that number.
However, there's nothing that prevents even the *verification* of the
certificate from having a similar unlikely failure! (Or similar
implementation bugs.)[3] Assuming the implementations and hardware are
completely independent, the best you can do is to multiply the
probability of failure in both systems. Thus, if the probability of
failure in each system independently is 10^32, then the probability
that *both* fail completely independently but in a way that gives the
same flawed result is at best 10^64. Look at the URL cited above and
compare that to the probability of a probableprime test failing. Is it
larger or smaller? If the probability is larger, the likelihood of your
"proof" being better than a pseudoprime test is purely illusory.
I'm not sure what the exact failure probability for a single
instruction is in modern hardware, but it's almost certainly *not*
better than 10^32. (Multiply this by the number of instructions
required to perform the calculation. )
One of the best sources of information I've seen about actual failure
rates in installed hardware was done by the SETI@Home team, (which had
the world's largest distributed supercomputer at some points) which
cited detected error rates in returned work units (each work unit was
given to at least two people for validation, so errors could be
detected.) I don't remember the exact numbers, but the actual failure
rate appeared to be many, many orders of magnitude lower than 10^32. I
don't seem to be able to find these stats at the moment. Does anyone
have the link?[4]
If you haven't verified a primality certificate independently to
decrease your probability of hardware or software error, (and there is
*always* a nonzero probability of error on real physical hardware and
where humans are involved, even in a primality "proof") you're likely
not doing any better than a probabilistic prime test, in which the
unreliability of hardware, software, communications, and humans, rapidly
become the limiting factors.
You're also much more likely that some random mischiefmaker will say,
"sure it's prime" when it's not because they're annoyed with you for not
doing these simple tests yourself, and for refusing to take advice on
tools that will do the work for you. But if people didn't refuse to
listen, I wouldn't get a chance to gratuitously sermonize.
If you didn't verify the primality certificate as many ways as
possible, you clearly can't claim you understand that you "need" a prime
number, and don't really understand the probability of all the different
ways that failure could have occurred. Do you even know that the
primality certificate that was posted here was valid for the number you
gave, or did someone maybe miss the last digit digit during
cutandpaste? Do you even know that the certificate was anything but a
cat walking across a keyboard? The probability that *you*
cutandpasted the number incorrectly is orders of magnitude higher than
probability of failure of a pseudoprime algorithm.[5]
Homework: 1.) Can anyone else estimate probabilities of certain
types of errors? What do you think are the probabilities of various
failure modes in posting "prove this number prime for me" to a public
group? Do any of those probabilities exceed that of failure of a
probabilistic test? (Hint: The answer is yes.)
2.) Even if you get a provable prime number handed down impeachably
from the ghost of Fermat, what's the probability that when you're
*using* this prime number that something goes wrong in those
calculations? (Hint: Weakest link in the chain.)
============ ====
Footnotes:
[1] I intentionally state "randomlychosen" because there are ways
to generate a very sparse set of numbers that can fool one of these
tests if you know in advance the bases it's going to test, which is why
most RabinMiller tests choose some bases randomly if there is the
potential for adversarial assault. See, for example:
François Arnault, Constructing Carmichael numbers which are strong
pseudoprimes to several bases, Journal of Symbolic Computation, v.20
n.2, p.151161, Aug. 1995
[2] There's a certain nonzero probability that an electron will go
"the wrong way" and potentially tunnel "backwards" through a potential
barrier. As voltages used in processors get lower, and as gates get
smaller and the number of electrons required to switch a gate get fewer,
this becomes increasingly more probable. (I don't have my "Feynman
Lectures on Computation" at hand or I'd post some equations for this
probability. Very highly recommended!
http://tinyurl. com/9q4p8o )
[3] Multiple programmers creating similar software bugs is more
common than you might think. Sun's Java implementation had a famous bug
in their calculation of the Jacobi symbol, which caused
primalitytesting routines to fail:
http://bugs. sun.com/bugdatab ase/view_ bug.do?bug_ id=4624738
When I implemented a function to calculate the Jacobi symbol in my
Frink programming language ( http://futureboy. us/frinkdocs/ ) I
initially created a similar bug, because my algorithm didn't work for
some negative numbers either. I didn't use Sun's algorithm, but I can
see how they went wrong. The algorithm often cited on the web, in
several number theory books, etc. needs preconditioning to handle
negative numbers correctly. Even more insanely, when evaluating
negative numbers, Java uses different sign conventions for the %
(modulus) operator (used for "int" values) and the BigInteger.mod( n)
function! It's easy to see how Sun even confuses their own programmers.
This bug in Sun's implementation caused some significant pain. Their
primality testing was originally a probabilistic RabinMiller test (with
probabilities that can easily be set that it won't return a wrong result
during the lifetime of the universe, and many users set them *way*
higher than that to be very safe) yet that bug caused failures much more
often, and introduced a method of failure that RabinMiller *can't*
produce, (RabinMiller can't ever declare a prime to be composite, but
it can, very rarely, declare a composite to be probably prime,) which is
why this failure mode was particularly unexpected to a lot of people,
and caused numbers above a certain size to fail mysteriously and
sporadically.
Note: When I was informed of this bug in my implementation of my
JacobiSymbol[ x] function, (it didn't affect my primality testing, which
has always worked properly,) I was ashamed that I wasn't able to release
a fix until I got home from work later that day. Sun, on the other
hand, took *3 years* to release a fix. (This bug was present in Java
versions 1.3 through 1.4.2.)
[4] Of course, some of their "failures" were due to intentional
attempts of people to corrupt their results, so exact probabilities of
failure are impossible to come by. There were interesting stories,
though, of *all* or *almost all* of the work units returned by several
wellmeaning participants returning incorrect results. The SETI team
contacted these people and were able to verify that their computers'
floatingpoint units were indeed failing. (Sometimes subtly enough to
not make everything crash, but enough to make all extended calculations
wrong.) This is interesting and probably indicates that the frequency
of subtly or explicitly broken processors in the world is far less than
10^9, setting a bound for what reliability we might expect for
primality testing.
[5] Don't laugh. This happened on this very list. A few years ago,
an intrepid researcher stated that they had been running a computer for
3+ years to find the factors of one of the RSA factoring challenge
numbers. Awesome persistence! And then one day it beeped! (I can't
imagine the excitement!) He announced to this list that he had
submitted his solution to RSA and was awaiting confirmation of the
factors, and he wasn't sure if the numbers were factors. I asked him
the obvious question, "did you multiply the two factors together and did
they come up with the original number?" The next day, with a leaden
heart, he responded to me and indicated that he had accidentally cut off
a digit when pasting in the original RSA number to his factoring
program. It still hurts me to think about it.

Alan Eliasen
eliasen@mindspring. com
http://futureboy. us/
[Nontext portions of this message have been removed]  On 04/25/2010 07:14 AM, Jens Kruse Andersen wrote:
> Your numbers apparently assume there are no hardware, software,
I didn't mean to imply in any way that pseudoprime tests were
> operator or other errors when the pseudoprime tests are performed.
> But they can have the same type of errors as primality proofs.
magically free of the same kinds of hardware/software/ human error. Of
course they're not, but perhaps I didn't state this clearly enough. The
limiting factor for reliability is always going to be the weakest link
in the chain (possibly the person cuttingandpasting in the number.)
> Fast pseudoprime test programs may implement more complicated
A RabinMiller algorithm can be written so simply that testing
> algorithms with greater risk of programming error, and may be written
> in assembler that tends to produce more errors for human programmers
> (partly because of increassed source code size), so it may be better to
> run a smaller number of pseudoprime tests with a slow simple program
> than a large number with a fast program.
against the trivial, nonoptimized version is likely always beneficial.
I definitely agree that the probability of undetected programming
errors increases with source size and complexity of algorithms, though.
We've all seen how hard it is to get even the multiplication of two
integers always correct using something like an FFT algorithm. From the
notes of the GMP project, many of these errors are even due to broken
compilers!
> If you run the same type of pseudoprime test with multiple supposedly
Don't forget the probability of cuttingandpasting the same wrong
> independent programs then some things risk causing the same error,
> for example:
> An error in a text read by multiple programmers.
> A systematic hardware error affecting operations likely to be performed
> by different programs implementing the same algorithm.
> A tricky part of the implementation which may fool multiple programmers.
> An error in a software library or other routine used by multiple programs.
number into all of those programs! Or receiving the wrong number due to
transmission errors.
The concept of independent verification reducing probability of error
rests on the idea that you don't have some sort of systematic error. If
you *do* have systematic error, no amount of independent validation will
improve your answers, and that needs to be understood.
> In brief, if you want to increase the "real" chance that a number is
Yes, my point was that reduction of error probability below the most
> prime then I think you should bet more on independence of as
> much as possible (software, hardware, algorithms, people, source
> of the number), than on increasing the number of pseudoprime tests.
> And aim for not only two independent of something but as many as
> possible or practical.
likely mode of failure could only be achieved by truly independent
tests. This means you have to look very closely indeed at eliminating
potential systematic errors. There are many of these failure modes and
some of their probabilities are very high. I cited human error or TCP
transmission error or mail/web client/server bugs as being
highprobability, systematic sources of failure.
The probability of these systematic errors probably also increases if
the number isn't of a simple form, e.g. 2^123451, but rather an
uncompressable number like the 300digit number cited, which has more
probability of corruption in transmission, errors in wrapping, or
undetected cutandpaste error, etc.

Alan Eliasen
eliasen@...
http://futureboy.us/  Alan you will be happy to see this article on the BBC, UK :)
http://news.bbc.co.uk/2/hi/technology/8637845.stm
Web security attack 'makes silicon chips more reliable'

An attack on a widely used web security system could soon help make silicon chips more powerful and reliable.
Many websites use cryptographic systems to scramble key data, such as credit card numbers, when customers pay.
Scientists have found that by varying the voltage to key parts of a computer's processor, the ability to keep this data secret is compromised.
The researchers also discovered that a method that helps chips beat the attack could also make them more reliable.
Secure sites
Many modern security systems, such as the ones websites use to encrypt the credit card numbers of their customers, are based around a system known as public key cryptography.
This uses two keys, one public and one private, to scramble data. One of the most widely used implementations of this is known as RSA authentication.
"If data is locked with a public key, it can only be unlocked with the corresponding private key," said Professor Todd Austin, from the electrical engineering and computer science department at the University of Michigan who helped conduct the research.
Within 10 years a chip will have transistor failures every day
Professor Valeria Bertacco
"It's the kind of algorithm you use when you go to a website and you see the little padlock in the lower right hand corner to indicate a secure connection," he said.
The keys take the form of large numbers more than 1,000 digits long. Security is ensured because trying to guess a private number by trying all possible combinations would take longer than the age of the universe, using current computer technology.
Professor Austin, working with Andrea Pellegrini and Professor Valeria Bertacco, found a much quicker route to guessing the keys by varying the voltage to a processor.
"You need to be able to control the voltage to the power source to the device," said Professor Bertacco. "By putting the voltage just below where it should be means the device makes computational mistakes  it suffers temporary transistor failure."
The voltage was varied when a target machine was communicating with another machine via the web and the data flying between the two was encrypted using the public key system.
"It makes one mistake every now and again," she said. "But we need just a few mistakes."
During their test, the three researchers collected 8800 corrupted signatures in 10 hours and then analysed them using software that could call on 81 separate machines to boost its number crunching power.
The end result of the research was an attack method that could extract all the parts of a 1024 bit key in about 100 hours.
'Error prone'
Initially, said Professor Bertacco, the work will lead to improvements in the way the public key security system works to make it less susceptible to such an attack. Future versions of the system will be "salted" with fake values to confuse any attempt to reconstruct a private key.
"It's part of the ongoing process of hardening RSA," said Professor Austin.
The implications of the research do not stop at security. It is also helping to produce error correction systems that spot when transistors fail and ensure that data is not corrupted as a result.
Professor Bertacco said the research would be useful when chips are made of even smaller components than those in use today. The widelyknown Moore's Law predicts that the number of transistors on a given size of silicon wafer doubles roughly every 18 months.
Often that doubling is due to the transistors on the chip getting smaller. The transistors on Intel's most up to date desktop computers are about 32 nanometres in size.
Intel has said that it expects to soon start producing chips with components 22 and 16nm wide. A nanometre is a billionth of a metre.
However, as components get smaller they can get less reliable and need error checking and correction software to help cope with any errors that get introduced.
"Our mainstream research in this area is to make microchips operate correctly even in the face of transistor failure," she said. "Within 10 years a chip will have transistor failures every day. As transistors get smaller so they are more prone to failure."

Ali
God > infinity
________________________________
From: Alan Eliasen <eliasen@...>
To: Ali Adams <alipoland@...>; Prime Number <primenumbers@yahoogroups.com>
Sent: Sun, April 25, 2010 3:59:17 PM
Subject: [PrimeNumbers] Strong pseudosermon (was 62digit IsPrime)
On 04/21/2010 09:01 PM, Ali Adams wrote:
> Greetings all,
>
> Can someone please help with validating if the following 62digit
> number is a prime or not:
>
> 1110819595668080516 5653650502135350 6057690906175754 64617311659
>
> I am aware of IsProbablePrime but need a definite primality test.
(in another posting, asked)
> What about this 309digit number?
>259336006801222696 0141827989906545 7702032918541745 1253947966996203 3747780569585929 9412847062270835 2120230964321433 3705453431960894 5822253023887835 9827583627468563 4622332103985890 9085250794700726 5127498998595582 3067653695374111 7527587085881465 1979141558307396 3161542913121427 0318567530145291 6463755740936626 397
(Which is not even probableprime, as one single strong pseudoprime
test shows.)
I'm about to sermonize, so be prepared, my brothers and sisters.
Whenever someone says they "need" a definite primality test, they, by
their actions, usually prove that they don't understand that a
primalityproving test, by itself, is not an infallible proof of
primality (in the real world) and they rarely if ever do the correct
thing to decrease the probability of error, giving them a result that's
effectively no more certain than a working pseudoprime test (and, by
probabilities and failure modes that I'll cite here, probably quite a
bit weaker. And by "quite a bit" I mean 20 orders of magnitude, easy.)
Note: Keep in mind that all of this analysis applies in the *real
world*, not to some perfect, fictitious mathematical abstraction where
programmers don't make errors and hardware never fails and you can
ignore most algorithms and divide out big pesky constants because the
ideal theoretical asymptotic performance is always what you get when you
run programs.
It is simple to implement and perform a strong pseudoprime test in
which the probability that a randomlychosen composite number is
mistakenly stated to be prime is so low that it would never happen in
your lifetime.[1] Not only that, you can trivially make the probability
of this mistake so low that you could test trillions of numbers every
second for the lifetime of the universe, and the probability of *any* of
those tests failing are still astronomically low, and that's even taking
the old ultraconservative bound that as many as 1/4 of strong
pseudoprime tests can fail. See citations in the link below for numbers
about how conservative that estimate really is.
Many people have pointed out over the years that the probability that
your *hardware* or *software* fails (say, due to a highenergy particle
passing through your processor, or random thermal drift of electrons[2] ,
or a bad transistor) during your primality test or primality "proof"
becomes rapidly much, much higher than the probability that, say, a
RabinMiller test incorrectly declares a composite to be prime.
Depending on the size of the number, this is true *even if you only do
one pass of a RabinMiller test*, and the probability of error in the
algorithm is far less than the probability of hardware failure, possibly
by hundreds or thousands of tens of thousands of *orders of magnitude*!
It may also be far, far more probable that the number you meant to
test or the reply (with certificate) was corrupted during communication
with someone else. For example, TCP only has a 16bit checksum, and can
miss, say, two singlebit errors separated by 16 bits, for a possible
undetected error rate of 2^16, or 1/65536 in a noisy channel. (Other
errorcorrecting algorithms apply to communication across the internet,
and most channels have fairly good s/n ratios so the endtoend
probability of error is luckily usually lower than this.)
There's also the probability that Yahoo does something stupid with
the long line and cuts off a digit or something. (Some would say the
probability of Yahoo's software doing something stupid when adding their
cruft to a posting is 1, but that's being mean. Their software isn't
really that bad. The probability is actually 1epsilon.)
To see approximate probabilities of the RabinMiller test failing
for certain number sizes, even with a *single* round of tests, see:
http://primes. utm.edu/notes/ prp_prob. html
Those probabilities of failure, especially for large numbers, are
mindbogglingly small! Far smaller than the probability of some other
source of error.
Note that for the 309digit number posted above, the probability of a
strong pseudoprime test mistakenly returning "prime" for a composite
number is less than 5.8*10^29. Is that probability higher than other
probabilities we've already listed? (And note that since a strong
pseudoprime test easily catches that the number is actually composite.
No matter what base you choose. I'm sure that many here wouldn't
hesistate to give a cash reward for anyone who can find *any* prime base
smaller than the number for which a strong pseudoprime test fails. I
will initially offer all the money in my wallet. And I haven't even
tried to look for one. I'm that confident in the probabilities, or my
wallet is at its usual sad level.)
It's hard to approximate the probability that a particular piece of
software or hardware or communication will fail, but you can never
expect your primality "proof" to be any stronger than the most likely
error in the chain.
If you really *need* a prime number, you *must* then be sure to take
the certificate produced by one program's prime number proof *and verify
this certificate* , presumably with different software on a different
machine and hardware architecture! (I feel I should repeat this
sentence many times!) And then verify it again with another piece of
software! If you *don't* do this, the probability that the primality
"proof" is in error is approximately the probability of the thing most
likely to go wrong in the entire chain. (Again, maybe cosmic rays,
software bugs, Pentiums, race conditions in software, power glitches,
probability of human error, etc.) The primality certificate gives you a
way of verifying (without performing the whole proof again) that the
proof is indeed valid for that number.
However, there's nothing that prevents even the *verification* of the
certificate from having a similar unlikely failure! (Or similar
implementation bugs.)[3] Assuming the implementations and hardware are
completely independent, the best you can do is to multiply the
probability of failure in both systems. Thus, if the probability of
failure in each system independently is 10^32, then the probability
that *both* fail completely independently but in a way that gives the
same flawed result is at best 10^64. Look at the URL cited above and
compare that to the probability of a probableprime test failing. Is it
larger or smaller? If the probability is larger, the likelihood of your
"proof" being better than a pseudoprime test is purely illusory.
I'm not sure what the exact failure probability for a single
instruction is in modern hardware, but it's almost certainly *not*
better than 10^32. (Multiply this by the number of instructions
required to perform the calculation. )
One of the best sources of information I've seen about actual failure
rates in installed hardware was done by the SETI@Home team, (which had
the world's largest distributed supercomputer at some points) which
cited detected error rates in returned work units (each work unit was
given to at least two people for validation, so errors could be
detected.) I don't remember the exact numbers, but the actual failure
rate appeared to be many, many orders of magnitude lower than 10^32. I
don't seem to be able to find these stats at the moment. Does anyone
have the link?[4]
If you haven't verified a primality certificate independently to
decrease your probability of hardware or software error, (and there is
*always* a nonzero probability of error on real physical hardware and
where humans are involved, even in a primality "proof") you're likely
not doing any better than a probabilistic prime test, in which the
unreliability of hardware, software, communications, and humans, rapidly
become the limiting factors.
You're also much more likely that some random mischiefmaker will say,
"sure it's prime" when it's not because they're annoyed with you for not
doing these simple tests yourself, and for refusing to take advice on
tools that will do the work for you. But if people didn't refuse to
listen, I wouldn't get a chance to gratuitously sermonize.
If you didn't verify the primality certificate as many ways as
possible, you clearly can't claim you understand that you "need" a prime
number, and don't really understand the probability of all the different
ways that failure could have occurred. Do you even know that the
primality certificate that was posted here was valid for the number you
gave, or did someone maybe miss the last digit digit during
cutandpaste? Do you even know that the certificate was anything but a
cat walking across a keyboard? The probability that *you*
cutandpasted the number incorrectly is orders of magnitude higher than
probability of failure of a pseudoprime algorithm.[5]
Homework: 1.) Can anyone else estimate probabilities of certain
types of errors? What do you think are the probabilities of various
failure modes in posting "prove this number prime for me" to a public
group? Do any of those probabilities exceed that of failure of a
probabilistic test? (Hint: The answer is yes.)
2.) Even if you get a provable prime number handed down impeachably
from the ghost of Fermat, what's the probability that when you're
*using* this prime number that something goes wrong in those
calculations? (Hint: Weakest link in the chain.)
============ ====
Footnotes:
[1] I intentionally state "randomlychosen" because there are ways
to generate a very sparse set of numbers that can fool one of these
tests if you know in advance the bases it's going to test, which is why
most RabinMiller tests choose some bases randomly if there is the
potential for adversarial assault. See, for example:
François Arnault, Constructing Carmichael numbers which are strong
pseudoprimes to several bases, Journal of Symbolic Computation, v.20
n.2, p.151161, Aug. 1995
[2] There's a certain nonzero probability that an electron will go
"the wrong way" and potentially tunnel "backwards" through a potential
barrier. As voltages used in processors get lower, and as gates get
smaller and the number of electrons required to switch a gate get fewer,
this becomes increasingly more probable. (I don't have my "Feynman
Lectures on Computation" at hand or I'd post some equations for this
probability. Very highly recommended!
http://tinyurl. com/9q4p8o )
[3] Multiple programmers creating similar software bugs is more
common than you might think. Sun's Java implementation had a famous bug
in their calculation of the Jacobi symbol, which caused
primalitytesting routines to fail:
http://bugs. sun.com/bugdatab ase/view_ bug.do?bug_ id=4624738
When I implemented a function to calculate the Jacobi symbol in my
Frink programming language ( http://futureboy. us/frinkdocs/ ) I
initially created a similar bug, because my algorithm didn't work for
some negative numbers either. I didn't use Sun's algorithm, but I can
see how they went wrong. The algorithm often cited on the web, in
several number theory books, etc. needs preconditioning to handle
negative numbers correctly. Even more insanely, when evaluating
negative numbers, Java uses different sign conventions for the %
(modulus) operator (used for "int" values) and the BigInteger.mod( n)
function! It's easy to see how Sun even confuses their own programmers.
This bug in Sun's implementation caused some significant pain. Their
primality testing was originally a probabilistic RabinMiller test (with
probabilities that can easily be set that it won't return a wrong result
during the lifetime of the universe, and many users set them *way*
higher than that to be very safe) yet that bug caused failures much more
often, and introduced a method of failure that RabinMiller *can't*
produce, (RabinMiller can't ever declare a prime to be composite, but
it can, very rarely, declare a composite to be probably prime,) which is
why this failure mode was particularly unexpected to a lot of people,
and caused numbers above a certain size to fail mysteriously and
sporadically.
Note: When I was informed of this bug in my implementation of my
JacobiSymbol[ x] function, (it didn't affect my primality testing, which
has always worked properly,) I was ashamed that I wasn't able to release
a fix until I got home from work later that day. Sun, on the other
hand, took *3 years* to release a fix. (This bug was present in Java
versions 1.3 through 1.4.2.)
[4] Of course, some of their "failures" were due to intentional
attempts of people to corrupt their results, so exact probabilities of
failure are impossible to come by. There were interesting stories,
though, of *all* or *almost all* of the work units returned by several
wellmeaning participants returning incorrect results. The SETI team
contacted these people and were able to verify that their computers'
floatingpoint units were indeed failing. (Sometimes subtly enough to
not make everything crash, but enough to make all extended calculations
wrong.) This is interesting and probably indicates that the frequency
of subtly or explicitly broken processors in the world is far less than
10^9, setting a bound for what reliability we might expect for
primality testing.
[5] Don't laugh. This happened on this very list. A few years ago,
an intrepid researcher stated that they had been running a computer for
3+ years to find the factors of one of the RSA factoring challenge
numbers. Awesome persistence! And then one day it beeped! (I can't
imagine the excitement!) He announced to this list that he had
submitted his solution to RSA and was awaiting confirmation of the
factors, and he wasn't sure if the numbers were factors. I asked him
the obvious question, "did you multiply the two factors together and did
they come up with the original number?" The next day, with a leaden
heart, he responded to me and indicated that he had accidentally cut off
a digit when pasting in the original RSA number to his factoring
program. It still hurts me to think about it.

Alan Eliasen
eliasen@mindspring. com
http://futureboy. us/
[Nontext portions of this message have been removed]  Alan,
Thank you for your thoughtful and considerate reply to the original poster, and to the group in general. I often have questions that I'd like to post here but do not because I fear being publicly flamed for my ignorance.
 In primenumbers@yahoogroups.com, Alan Eliasen <eliasen@...> wrote:
>
> On 04/21/2010 09:01 PM, Ali Adams wrote:
> > Greetings all,
> >
> > Can someone please help with validating if the following 62digit
> > number is a prime or not:
> >
> > 11108195956680805165653650502135350605769090617575464617311659
> >
> > I am aware of IsProbablePrime but need a definite primality test.
>
> (in another posting, asked)
> > What about this 309digit number?
>
>
<snip>   In primenumbers@yahoogroups.com,
"Jens Kruse Andersen" <jens.k.a@...> wrote:
> It will often be more important to an audience of an announced prime
Jens, as per usual, put his finger on the core of this debate.
> that you say "Trusted program X proved primality" than you argue
> about the microscopic risk that something went wrong in all the
> pseudoprime tests.
In primality proving, we subject ourselves to two disciplines:
1) do not proclaim a proof if you cannot understand the proof method
2) take reasonable precautions that your claim has not been
vitiated by egregious soft/hardware errors.
Alan's points are well put. Yet he has missed the essential
gravamen of Jens' dictum
> in practice the negative consequences of an alleged prime
Noone suffers if a cosmic ray hits your computer during a test.
> being composite are usually so small
Noone suffers if George's FFT's screw up during that test.
We are trying to be as careful and honest as humanly possible.
The pursuit of excellence is a greater cause than its achievement.
David
Your message has been successfully submitted and would be delivered to recipients shortly.