Loading ...
Sorry, an error occurred while loading the content.

Re: [powersdr-iq] Re: query on transmit setup

Expand Messages
  • Martin
    For a paddle, the contacts should be: Pin 4 common Pin 6 & 7 Paddle left / right. For a bug, take 6 or 7 . ... -- Ohne CW ist es nur CB.. 73, Martin DM4iM
    Message 1 of 7 , Jun 7, 2013
    • 0 Attachment
      For a paddle, the contacts should be:

      Pin 4 common

      Pin 6 & 7 Paddle left / right.

      For a bug, take 6 or 7 .


      Am 07.06.2013 06:34, schrieb ericwd9:
      > Keying the key input jack to the softrock does not tell PSDR that
      > you are transmitting. When running PSDR you must key the softrock
      > through PSDR via a serial com port. Setup/DSP/Keying. Your key
      > connects to the COM port and you key PSDR which in turn keys the
      > softrock.
      >
      > Regards 73 Eric VK5ZAG
      >


      --

      Ohne CW ist es nur CB..

      73, Martin DM4iM
    • Martin
      Sorry: This applies to a 9-pin SUB-D. For a paddle, the contacts should be: Pin 4 common Pin 6 & 7 Paddle left / right. For a bug, take 6 or 7 . -- Ohne CW ist
      Message 2 of 7 , Jun 7, 2013
      • 0 Attachment
        Sorry: This applies to a 9-pin SUB-D.


        For a paddle, the contacts should be:

        Pin 4 common

        Pin 6 & 7 Paddle left / right.

        For a bug, take 6 or 7 .



        --

        Ohne CW ist es nur CB..

        73, Martin DM4iM
      Your message has been successfully submitted and would be delivered to recipients shortly.