Loading ...
Sorry, an error occurred while loading the content.

Re: PowerSDR v2.4 for Homemade SDR transceivers

Expand Messages
  • sv1eia
    Hi Jos, That can be done with the use of VAC1 tab. From there you can re-direct the Rx and Tx streams. You can aave a look at the Flex PowerSDR manual too for
    Message 1 of 38 , Oct 22, 2012
    • 0 Attachment
      Hi Jos,

      That can be done with the use of VAC1 tab.
      From there you can re-direct the Rx and Tx streams.
      You can aave a look at the Flex PowerSDR manual too for details.
      Also you can see the links section
      -> http://groups.yahoo.com/group/powersdr-iq/links
      and specifically the one named "How to Setup VAC with PowerSDR"

      73,
      Christos SV1EIA


      --- In powersdr-iq@yahoogroups.com, Jos Stevens <pa3cce@...> wrote:
      >
      > Hi Christos
      >
      > I'm using the latest version for my homebrew equipment and it's running great on RX at "Unsupported
      > Card",  I can direct the Rx audio in- and outputs to where  I like.(I have several options).
      >
      > My queestion is : I don't see an option to direct the Tx audio in and outs likewise, is this not possible ?
      > I can do so when using HDSDR.
      >
      > Thanks
      > Jos
      >
      >
      >
      >
      > ________________________________
      > From: sv1eia <sv1eia@...>
      > To: powersdr-iq@yahoogroups.com
      > Sent: Wednesday, October 10, 2012 3:40 PM
      > Subject: [powersdr-iq] Re: PowerSDR v2.4 for Homemade SDR transceivers
      >
      >
      >  
      > Hi Alex,
      >
      > Follow the instructions in the .pdf file included in the archive.
      >
      > And read again the post in order to understand what needs to be done.
      >
      > 73,
      > Christos SV1EIA
      >
      > -
      >
    • sv1eia
      - http://groups.yahoo.com/group/powersdr-iq/message/2730
      Message 38 of 38 , Jan 23, 2013
      • 0 Attachment
        -> http://groups.yahoo.com/group/powersdr-iq/message/2730


        --- In powersdr-iq@yahoogroups.com, "Kent" wrote:
        >
        > Hello Christos
        >
        > I have tried to follow the link but it does not work
        > I have tried to find the file on the group's page but can not find it.
        > Were can I find it?
        >
        > Best regards
        >
        > SM3SJN/Kent
        >
        > --- In powersdr-iq@yahoogroups.com, "sv1eia" wrote:
        > >
        > > Hi,
        > >
        > > Here is the latest version of PowerSDR application that can be used from the homebrew SDR users for rigs compatible with the USB ATTiny DG8SAQ/PE0GKO firmware
        > >
        > > -> http://code.google.com/p/powersdr-iq/downloads/detail?name=PowerSDRv2_for_Homemade_Rigs.zip
        > >
        > > It is a new concept that it looks to me should move forward and that is to have the homemade rigs act emulating as the SDR1000, thus any integration and the following of the main application advances from a developer's view are much easier.
        > > So that is the main direction of this setup. Instructions on how to do this are included , with links for any required download.
        > >
        > > The principle is that the main installer from FlexRadio will be used and only a couple of files included in the above archive will simply copied onto the PowerSDR program installation folder to perform the USB firmware integration/emulation. As simple as that.
        > >
        > > Of course all platforms are supported XP/Vista/W7 on 32/64 bits and a USB ATTiny firmware signed driver for all of them is also included.
        > >
        > > This is for non-commercial use and at user's responsibility, meant only for homemade rigs and home users that want to have experimentation and get acquainted with SDR.
        > >
        > > Enjoy & 73,
        > > Christos SV1EIA
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.