Loading ...
Sorry, an error occurred while loading the content.

Re: Power SDR

Expand Messages
  • sv1uh
    Dear Christos It¢s so useful links and thank you very much. 73, Babis sv1uh
    Message 1 of 5 , Jul 25 2:15 PM
    • 0 Attachment
      Dear Christos
      It¢s so useful links and thank you very much.
      73, Babis sv1uh



      --- In powersdr-iq@yahoogroups.com, "sv1eia" <sv1eia@...> wrote:
      >
      > Ok,
      >
      > I guess you have the PowerSDR-IQ v1.19.x installed there.
      >
      > You have to make sure that is is configured explicitly as the FA-66 (and not as unsupported although it is a FA-66, the system cannot auto-identify it) in the list of audio cards in PowerSDR-IQ audio setup page.
      > You can refer to this guide
      > Edirol FA-66 setup
      > -> http://support.flex-radio.com/Downloads.aspx?id=46
      >
      >
      > Also, although quite extensive, the manual is a must-read if you want to have proper operations and handling, you can see it here
      >
      > PowerSDR manual, read chapter 7 for main operations
      > -> http://support.flex-radio.com/Downloads.aspx?id=43
      >
      > These and other useful links on configuration and operations can be seen in the links section of the group here
      > -> http://groups.yahoo.com/group/powersdr-iq/links
      >
      > 73,
      > Christos SV1EIA
      >
      >
      > --- In powersdr-iq@yahoogroups.com, "sv1uh" <sv1uh@> wrote:
      > >
      > > Hi Christos
      > > I need to use VOX mode, as ptt, to Lima SDR. I can¢t to do that. I use a supported card, Edirol FA-66.
      > > Babis sv1uh
      > >
      > >
      > >
      > > --- In powersdr-iq@yahoogroups.com, "sv1eia" <sv1eia@> wrote:
      > > >
      > > > Geia sou Charalampe,
      > > >
      > > > From what I understand, although you're not saying any details about your configuration, you probably use an "unsupported" audio card.
      > > > VOX amongst other functions is not available in such configurations.
      > > > You need to have a supported card for that to work.
      > > >
      > > > 73,
      > > > Christos SV1EIA
      > > >
      > > >
      > > > --- In powersdr-iq@yahoogroups.com, "sv1uh" <sv1uh@> wrote:
      > > > >
      > > > > Hi
      > > > > How can I use the vox of the Power SDR program? I¢m using a Lima sdr.
      > > > > sv1uh
      > > > >
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.