Loading ...
Sorry, an error occurred while loading the content.
 

Re: out of band

Expand Messages
  • sv1eia
    Mike, Have a look at the previous posts. Your question is answered. 73, Christos SV1EIA
    Message 1 of 7 , Jun 30, 2011
      Mike,

      Have a look at the previous posts.
      Your question is answered.

      73,
      Christos SV1EIA


      --- In powersdr-iq@yahoogroups.com, miclevel@... wrote:
      >
      > Hi Christos ---
      >
      > I have a related question --
      > I will be using powersdr-iq and ensemble as a microwave transverter I/F at whatever "out of band" frequency
      > my downconverter crystal happens to fall on (for example, 19 MHz, etc) ...
      > will the software prevent me from transmitting?
      > Is there an overall disable of the out of band checking?
      >
      > Thanks!
      >
      > Mike K6ML
      >
      > ----- Original Message -----
      > From: "LA3JJ" <la3jj@...>
      > To: powersdr-iq@yahoogroups.com
      > Sent: Thursday, June 30, 2011 1:51:46 AM
      > Subject: [powersdr-iq] Re: The WSPR channel on 60m
      >
      >
      >
      >
      >
      >
      > Oh, sorry, when using extended and tuning to 5.287200 the band indicator switches to 80m and even if it displays "out of band" I am now able to tx on 60m and thats the main thing. Thank you!
      >
      > 73, Jon
      >
      > --- In powersdr-iq@yahoogroups.com , "sv1eia" <sv1eia@> wrote:
      > >
      > > Did you select 'Extended' ?
      > >
      > >
      > > --- In powersdr-iq@yahoogroups.com , "LA3JJ" <la3jj@> wrote:
      > > >
      > > > Well, I've tried that Christos but it will only let me tx on the 5 channels from 5.330 to 5.403 Mhz. The WSPR frequency is at 5.288700 and is allowed in UK, Iceland, Norway among others. It seems to me that PSDR sticks to the 5 channels and just enables tx in the relevant countries. The regulation in my country is not for channels at all. I can use the 60m band fully. I think there is a similar situation in UK, where there may be an aditional channel for around 5.288. There is hopefully some datbase setting that can be changed?
      > > > I do have a sked with Ross in Afganistan this evening....
      > > > 73, Jon
      > > >
      > > > --- In powersdr-iq@yahoogroups.com , "sv1eia" <sv1eia@> wrote:
      > > > >
      > > > > Hi Jon,
      > > > >
      > > > > -> Setup->General->Hardware Config->Region
      > > > >
      > > > > And select what is appropriate.
      > > > >
      > > > > 73,
      > > > > Christos SV1EIA
      > > > >
      > > > >
      > > > > --- In powersdr-iq@yahoogroups.com , "LA3JJ" <la3jj@> wrote:
      > > > > >
      > > > > > Hi Christos,
      > > > > > I tried today to put a QRPp signal on 60m WSPR, but the PowerSDR will not let me tx on the WSPR "channel". Is there a way to override the out of band warning? I am allowed to transmit on the full 60m band. The PSDR seems to be ony for the US channels.
      > > > > >
      > > > > > 73, Jon
      > > > > >
      > > > >
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.