Loading ...
Sorry, an error occurred while loading the content.

3004Re: Soundblaster X-FI causes Blue Screen of Death

Expand Messages
  • ericwd9
    Jan 30, 2014
    • 0 Attachment
      I think the "GUI" enebles you to set up the Audio paths and levels but I really don't know that "card" at all.
      Regards Eric VK5ZAG
      SR6.3/MoBo4.3/USB2SDR/PSDR-IQ/5W 160=10m seamless.

      --- In powersdr-iq@yahoogroups.com, Albert Gerheim <alpg49@...> wrote:
      >
      > Hey! That voltage setting seems to do the trick. I ran it down to 0.5,
      > and I can work JT65/9 simultaneously. I'll have to try my 40, 30, 20
      > softrock, which had a bigger problem. THe problem on 15 is that higher
      > audio frequencies get attenuated somewhere. So I can work with 0-3kHz OK,
      > but if I try to work JT65+JT9 in WSJT-X, audio at 4kHz gets attenuated
      > (yes, I checked the transmit filter). :-)
      >
      > I may have to run it waaaaay down to 0.2 or 0.1. We'll see...
      >
      > Thanks!
      >
      >
      >
      > On Wed, Jan 29, 2014 at 3:15 PM, Albert Gerheim <alpg49@...> wrote:
      >
      > > I had a D44, then bought a computer with low form factor which doesn't
      > > accept the card. I gave the D44 away to someone in exchange for a donation
      > > to Wounded Warrior Project. I used the unsupported X-FI card for quite
      > > some time, then I had a disk crash, and had to rebuild the PC. At the
      > > moment, I can work 15 at 1 Watt, and that's all I need for now.
      > >
      > > Yes, I've fooled with the voltage setting, as well as the PA settings.
      > > PSDR produces more audio to compensate for the low "external" gains.
      > >
      > >
      > >
      > >
      > > On Wed, Jan 29, 2014 at 2:44 PM, <sv1eia@...> wrote:
      > >
      > >>
      > >>
      > >> Albert,
      > >>
      > >> As said many times, if you want to have something good, use D44 of FA66.
      > >>
      > >> One thing that you can try if you want, is to change the 'voltage'
      > >> setting on the audio setup pages.
      > >> If it is show 1.0 volts, reduce it to 0.7v, that will make the audio to
      > >> be a bit higher regardless that you lower the value..
      > >>
      > >>
      > >
      > >
      > >
      > > --
      > > Al Gerheim, K1QN
      > > Celebrating 50 years in ham radio!
      > >
      > >
      >
      >
      > --
      > Al Gerheim, K1QN
      > Celebrating 50 years in ham radio!
      >
    • Show all 12 messages in this topic