Re: Postscreen config
- On Mon, Apr 29, 2013 at 09:48:00AM +0200, Marko Weber | ZBF wrote:
> Am 2013-04-24 15:59, schrieb Tony Nelson:snip
> >After reading through the recent Postscreen DNSBL threads I decided
> >to give it a try.
> >I used Rob's example from http://rob0.nodns4.us/postscreen.html 
> >as a leaping off point, but chose to leave pipelining disabled until
> >I'm sure I understand what I have going on.
> in robs config example, have you SEEN this:Hahaha, no, Tony had not seen that, because those were warnings I
added because of his feedback. :)
> ### Postscreen Howto and *UNDERSTAND* it *BEFORE* you enable the--
> ### following tests!
> postscreen_bare_newline_action = enforce
> postscreen_bare_newline_enable = yes
> postscreen_non_smtp_command_enable = yes
> postscreen_pipelining_enable = yes
> ### ADDENDUM: Any one of the foregoing three *_enable settings may
> ### significant and annoying mail delays.
> READ the postscreen howto, and understand what happens.
> i would not recommend you to enable this.
http://rob0.nodns4.us/ -- system administration and consulting
Offlist GMX mail is seen only if "/dev/rob0" is in the Subject: