Re: main.cf: How to remove "mynetworks"?
- On Sun, Oct 28, 2012 at 02:40:27PM -0400, btb@... wrote:
> On Oct 28, 2012, at 12.47, thorsopia@... wrote:Unsetting mynetworks should be quite safe, acting just as if any
> > I don't want to send emails directly from my server. (I'm going
> > to connect from a client.)
> > I have the following settings in "main.cf":
> > mynetworks = 127.0.0.0/8
> > smtpd_recipient_restrictions =
> > permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
> > I guess that I should remove "permit_mynetworks", but what about
> > "mynetworks"? Should I remove that line or it will be enough to
> > use the following?
> > mynetworks =
> i'm a fan of not using mynetworks as well, and prefer to use
> check_client_access for what mynetworks was traditionally used
> to accomplish. to be thorough, you'd do both. do keep in mind
> though that there are a number of other parameters whose defaults
> reference mynetworks or permit_mynetworks. this doesn't mean it
> can't be done, and it works fine for me, but you just need to be
> aware that other adjustments may be necessary as well, depending
> on the particulars of your setup.
address checked is not within $mynetworks.
The good thing about mynetworks is that all other things that use
$mynetworks are consistent. These are supposed to be the hosts under
your direct control.
http://rob0.nodns4.us/ -- system administration and consulting
Offlist GMX mail is seen only if "/dev/rob0" is in the Subject: