Loading ...
Sorry, an error occurred while loading the content.

292878Re: Postscreen config

Expand Messages
  • /dev/rob0
    Apr 29, 2013
    • 0 Attachment
      On Mon, Apr 29, 2013 at 09:48:00AM +0200, Marko Weber | ZBF wrote:
      > Am 2013-04-24 15:59, schrieb Tony Nelson:
      > >After reading through the recent Postscreen DNSBL threads I decided
      > >to give it a try.
      > >
      > >I used Rob's example from http://rob0.nodns4.us/postscreen.html [1]
      > >as a leaping off point, but chose to leave pipelining disabled until
      > >I'm sure I understand what I have going on.
      snip

      > in robs config example, have you SEEN this:

      Hahaha, no, Tony had not seen that, because those were warnings I
      added because of his feedback. :)

      > ### Postscreen Howto and *UNDERSTAND* it *BEFORE* you enable the
      > ### following tests!
      > postscreen_bare_newline_action = enforce
      > postscreen_bare_newline_enable = yes
      > postscreen_non_smtp_command_enable = yes
      > postscreen_pipelining_enable = yes
      > ### ADDENDUM: Any one of the foregoing three *_enable settings may
      > cause
      > ### significant and annoying mail delays.
      >
      >
      > READ the postscreen howto, and understand what happens.
      > i would not recommend you to enable this.
      --
      http://rob0.nodns4.us/ -- system administration and consulting
      Offlist GMX mail is seen only if "/dev/rob0" is in the Subject:
    • Show all 6 messages in this topic