Loading ...
Sorry, an error occurred while loading the content.

Re: Small RC pop-pop boat video

Expand Messages
  • Daryl
    Pete, Tried to PM you but it would not go through.Are you still around? Daryl.
    Message 1 of 11 , May 20, 2013
    • 0 Attachment
      Pete, Tried to PM you but it would not go through.Are you still around? Daryl.

      --- In pop-pop-steamboats@yahoogroups.com, "Pete" <georgeyyy@...> wrote:
      >
      > Kenneth,
      >
      > I had heard of SpaceClaim a couple of years ago. I think that it was from England. I did go to there Website. It List for around $2500. No mention of Annual maintenance cost. It's a direct modeler which is to my liking as that is what KeyCreator is. They are much more intuitive and easier to use than the History based modelers. I will have to do some more research and try to get a trial copy when Alibre trial runs out. Thanks.
      >
      > --- In pop-pop-steamboats@yahoogroups.com, <kenneth@> wrote:
      > >
      > > Pete,
      > >
      > > If the free "123D Design" software is not enough CAD horsepower for your
      > > tasks, investigate the new SpaceClaim software. It is my understanding that
      > > you can get it; by explicitly asking for a lower price, for approximately
      > > the same "under $2k" Alibre Design Professional product that you have
      > > referenced.
      > >
      > >
      > > ----- Original Message -----
      > > From: "Pete" <georgeyyy@>
      > > To: <pop-pop-steamboats@yahoogroups.com>
      > > Sent: Saturday, March 16, 2013 4:56 AM
      > > Subject: [pop-pop-steamboats] Re: Small RC pop-pop boat video
      > >
      > >
      > > Hi Kenneth,
      > >
      > > I am a retired Mechanical CAD Designer with 25 years of CAD experience on
      > > several different packages. I used Cadkey/Keycreator since 1994. In 2009 I
      > > learned Solidworks but took a voluntary layoff in 2010. I never got really
      > > proficient with it. Last year I was contacted by a friend who designs steam
      > > engines he as a project that he bid on in Michigan. He asked me if I would
      > > do the CAD work for him. I can't afford the $5K for Keycreator or the over
      > > $10K for Solidworks. I have been looking at Alibre Design Professional. It
      > > sells for $2300 but includes a $400 annual maintenance contract. They sent a
      > > trial copy to me to use for a month. It seems quite impressive. Thursday
      > > they called and offered the package to me for under $2K. I'm between a rock
      > > and a hard place because the contract hasn't been awarded yet. Retirement is
      > > so much fun!
      > >
      > > --- In pop-pop-steamboats@yahoogroups.com, <kenneth@> wrote:
      > > >
      > > >
      > > > Regarding "... when looking for CAD software ..." -
      > > > the free '123D Design' software was recently dicovered here.
      > > > It looks terrific for free.
      > > > What CAD options have you found?
      > > >
      > > >
      > > > ----- Original Message -----
      > > > From: "Frank McNeill" <frankmcneilll@>
      > > > To: <pop-pop-steamboats@yahoogroups.com>
      > > > Sent: Friday, March 15, 2013 12:01 PM
      > > > Subject: [pop-pop-steamboats] Re: Small RC pop-pop boat video
      > > >
      > > > --- In pop-pop-steamboats@yahoogroups.com, "Pete" <georgeyyy@> wrote:
      > > > >
      > > > > I came across this video when looking for CAD software.
      > > > >
      > > > > http://www.youtube.com/watch?v=0LD8NtB9dMs You may have to cut and
      > > > > paste.
      > > > >
      > > > Hi Pete,
      > > > I thought the pop-pop steamboats crew had abandoned ship until I saw your
      > > > message.
      > > > Old Frank
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.