Loading ...
Sorry, an error occurred while loading the content.
 

put put battleship

Expand Messages
  • RyanN
    A long time ago, I had a lot of time on my hands and built little ships out of paper and tape- mainly to make july 4th more fun. nothing beats a little war in
    Message 1 of 7 , May 17, 2012
      A long time ago, I had a lot of time on my hands and built little ships out of paper and tape- mainly to make july 4th more fun. nothing beats a little war in the driveway.

      Well, over the past 5 years I've improved one thing or another, model after model, series after series have been constant improvements.  My most popular model can support a 20 lb barbell without caving. impressive for paper.
      (I would post pictures, but I haven't found any upload forms yet.)

      Anywho, I wanted to add the putput engine to one of the water-capable models.

      I ran into a few problems.

      1.) I could never perfect a boiler- every prototype leaked.  I used JB weld to fix a tin can together. I need a better epoxy glue, but I'm not sure which one I need.

      2.) Any boiler system I built (that could work temporarily) was insufficient to push large, heavy crafts.
      Typical ship dimensions:
      approx 3~4 ft. length,  approx 9 in. width, approx 3~4 in. height.   general weight, approx 10~15 lbs.
    • Sparks, Matthew
      http://imgur.com/ free photo sharing. ... -- *Matthew Sparks* Systems Administrator The McClatchy Company 2100 Q St. Sacramento, CA 95816 (916) 321-1887
      Message 2 of 7 , May 17, 2012
        http://imgur.com/  
        free photo sharing.


        On Thu, May 17, 2012 at 6:25 AM, RyanN <deridex120@...> wrote:


        A long time ago, I had a lot of time on my hands and built little ships out of paper and tape- mainly to make july 4th more fun. nothing beats a little war in the driveway.

        Well, over the past 5 years I've improved one thing or another, model after model, series after series have been constant improvements.  My most popular model can support a 20 lb barbell without caving. impressive for paper.
        (I would post pictures, but I haven't found any upload forms yet.)

        Anywho, I wanted to add the putput engine to one of the water-capable models.

        I ran into a few problems.

        1.) I could never perfect a boiler- every prototype leaked.  I used JB weld to fix a tin can together. I need a better epoxy glue, but I'm not sure which one I need.

        2.) Any boiler system I built (that could work temporarily) was insufficient to push large, heavy crafts.
        Typical ship dimensions:
        approx 3~4 ft. length,  approx 9 in. width, approx 3~4 in. height.   general weight, approx 10~15 lbs.





        --
        Matthew Sparks
        Systems Administrator
        The McClatchy Company
        2100 Q St.
        Sacramento, CA 95816
        (916) 321-1887

      • zoomkat
        ... You could fairly inexpensivly move up to brazing copper and steel with a map gas torch. Brazed joints and seams allow for very high temperatures that
        Message 3 of 7 , May 18, 2012
          -- In pop-pop-steamboats@yahoogroups.com, "RyanN" <deridex120@...> wrote:
          > Anywho, I wanted to add the putput engine to one of the water-capable
          > models.
          >
          > I ran into a few problems.
          >
          > 1.) I could never perfect a boiler- every prototype leaked. I used JB weld to fix a tin can together. I need a better epoxy glue, but I'm not sure which one I need.

          You could fairly inexpensivly move up to brazing copper and steel with a map gas torch. Brazed joints and seams allow for very high temperatures that facilitate flashing water and generating rapid pressure spikes. If the joined engine surfaces are sufficiently distant from the heat source, JBWeld might still be useable.


          > 2.) Any boiler system I built (that could work temporarily) was
          insufficient to push large, heavy crafts. Typical ship dimensions:
          approx 3~4 ft. length, approx 9 in. width, approx 3~4 in. height.
          general weight, approx 10~15 lbs.

          Better performing 1/4" tube engines are starting to appear. I think there is still interest in building larger pop pop engines, if only to have 15 min of fame for having made the largest successful operating engine. There is a picture on the net of a large ~3' German pop pop that appears to have two flat boilers.
        • RyanN
          here are some photos. http://i.imgur.com/A21cx.jpg?1 http://i.imgur.com/MFUWl.jpg?1
          Message 4 of 7 , May 21, 2012
            here are some photos.

            http://i.imgur.com/A21cx.jpg?1
            http://i.imgur.com/MFUWl.jpg?1

            --- In pop-pop-steamboats@yahoogroups.com, "RyanN" <deridex120@...> wrote:
            >
            > A long time ago, I had a lot of time on my hands and built little ships
            > out of paper and tape- mainly to make july 4th more fun. nothing beats a
            > little war in the driveway.
            > Well, over the past 5 years I've improved one thing or another, model
            > after model, series after series have been constant improvements. My
            > most popular model can support a 20 lb barbell without caving.
            > impressive for paper.
            > (I would post pictures, but I haven't found any upload forms yet.)
            >
            > Anywho, I wanted to add the putput engine to one of the water-capable
            > models.
            >
            > I ran into a few problems.
            >
            > 1.) I could never perfect a boiler- every prototype leaked. I used JB
            > weld to fix a tin can together. I need a better epoxy glue, but I'm not
            > sure which one I need.
            >
            > 2.) Any boiler system I built (that could work temporarily) was
            > insufficient to push large, heavy crafts.
            > Typical ship dimensions:
            > approx 3~4 ft. length, approx 9 in. width, approx 3~4 in. height.
            > general weight, approx 10~15 lbs.
            >
          • Slater Harrison
            How do you make it waterproof, Ryan? Just tape? From: pop-pop-steamboats@yahoogroups.com [mailto:pop-pop-steamboats@yahoogroups.com] On Behalf Of RyanN Sent:
            Message 5 of 7 , May 21, 2012

              How do you make it waterproof, Ryan? Just tape?

               

              From: pop-pop-steamboats@yahoogroups.com [mailto:pop-pop-steamboats@yahoogroups.com] On Behalf Of RyanN
              Sent: Monday, May 21, 2012 12:52 PM
              To: pop-pop-steamboats@yahoogroups.com
              Subject: [pop-pop-steamboats] Re: put put battleship

               

               

              here are some photos.

              http://i.imgur.com/A21cx.jpg?1
              http://i.imgur.com/MFUWl.jpg?1

              --- In pop-pop-steamboats@yahoogroups.com, "RyanN" <deridex120@...> wrote:
              >
              > A long time ago, I had a lot of time on my hands and built little ships
              > out of paper and tape- mainly to make july 4th more fun. nothing beats a
              > little war in the driveway.
              > Well, over the past 5 years I've improved one thing or another, model
              > after model, series after series have been constant improvements. My
              > most popular model can support a 20 lb barbell without caving.
              > impressive for paper.
              > (I would post pictures, but I haven't found any upload forms yet.)
              >
              > Anywho, I wanted to add the putput engine to one of the water-capable
              > models.
              >
              > I ran into a few problems.
              >
              > 1.) I could never perfect a boiler- every prototype leaked. I used JB
              > weld to fix a tin can together. I need a better epoxy glue, but I'm not
              > sure which one I need.
              >
              > 2.) Any boiler system I built (that could work temporarily) was
              > insufficient to push large, heavy crafts.
              > Typical ship dimensions:
              > approx 3~4 ft. length, approx 9 in. width, approx 3~4 in. height.
              > general weight, approx 10~15 lbs.
              >




              This message, together with any attachments, may contain information which is privileged and confidential. If the reader of this message is not the intended recipient or the agent responsible for delivering it to the intended recipient, you are hereby notified that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the message, along with any attachments.


            • Wes Goostrey
              Why can t I get to the two links to see what this battleship looks like ? I keep getting a page that says FORBIDDEN Wes ________________________________
              Message 6 of 7 , May 21, 2012
                Why can't I get to the two links to see what this battleship looks like ? I keep getting a page that says "FORBIDDEN"
                Wes


                From: Slater Harrison <Sharrison@...>
                To: "'pop-pop-steamboats@yahoogroups.com'" <pop-pop-steamboats@yahoogroups.com>
                Sent: Monday, May 21, 2012 12:46 PM
                Subject: RE: [pop-pop-steamboats] Re: put put battleship

                 
                How do you make it waterproof, Ryan? Just tape?
                 
                From: pop-pop-steamboats@yahoogroups.com [mailto:pop-pop-steamboats@yahoogroups.com] On Behalf Of RyanN
                Sent: Monday, May 21, 2012 12:52 PM
                To: pop-pop-steamboats@yahoogroups.com
                Subject: [pop-pop-steamboats] Re: put put battleship
                 
                 
                here are some photos.

                http://i.imgur.com/A21cx.jpg?1
                http://i.imgur.com/MFUWl.jpg?1

                --- In pop-pop-steamboats@yahoogroups.com, "RyanN" <deridex120@...> wrote:
                >
                > A long time ago, I had a lot of time on my hands and built little ships
                > out of paper and tape- mainly to make july 4th more fun. nothing beats a
                > little war in the driveway.
                > Well, over the past 5 years I've improved one thing or another, model
                > after model, series after series have been constant improvements. My
                > most popular model can support a 20 lb barbell without caving.
                > impressive for paper.
                > (I would post pictures, but I haven't found any upload forms yet.)
                >
                > Anywho, I wanted to add the putput engine to one of the water-capable
                > models.
                >
                > I ran into a few problems.
                >
                > 1.) I could never perfect a boiler- every prototype leaked. I used JB
                > weld to fix a tin can together. I need a better epoxy glue, but I'm not
                > sure which one I need.
                >
                > 2.) Any boiler system I built (that could work temporarily) was
                > insufficient to push large, heavy crafts.
                > Typical ship dimensions:
                > approx 3~4 ft. length, approx 9 in. width, approx 3~4 in. height.
                > general weight, approx 10~15 lbs.
                >



                This message, together with any attachments, may contain information which is privileged and confidential. If the reader of this message is not the intended recipient or the agent responsible for delivering it to the intended recipient, you are hereby notified that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the message, along with any attachments.




              • RyanN
                @Goostrey: I don t know why you get the forbidden error, but try this alternate link. I used photobucket.
                Message 7 of 7 , May 21, 2012
                  @Goostrey:
                  I don't know why you get the "forbidden" error, but try this alternate link. I used photobucket.
                  http://i26.photobucket.com/albums/c118/_Immortal_Rayden/100_0700.jpg
                  http://i26.photobucket.com/albums/c118/_Immortal_Rayden/263127_212660818776863_100000988404861_579398_2226617_n.jpg


                  @Harrison
                  The best way to insulate the paper properly from water is a solid layer of foil to cover the bottom, and at least the lower half of the side hull, (for water sloshing) this completely stops the paper from absorbing water, assuming there are no flaws in the foil coating. the surface tension between calm water and the foil also provides an excellent "glide" with a gentle push. additionally, aluminum foil bonds excellently to scotch tape- which is my tape of choice.

                  An undercoating of tape (of any kind) will produce air bubbles and pockets which will trap water. This destroys the adhesive and promotes "pulping" of the underside hull. Needless to say, too much "pulping" would render the ship unservicable.

                  --- In pop-pop-steamboats@yahoogroups.com, Wes Goostrey <wgoostrey@...> wrote:
                  >
                  > Why can't I get to the two links to see what this battleship looks like ? I keep getting a page that says "FORBIDDEN"
                  > Wes
                  >
                  >
                  >
                  > ________________________________
                  > From: Slater Harrison <Sharrison@...>
                  > To: "'pop-pop-steamboats@yahoogroups.com'" <pop-pop-steamboats@yahoogroups.com>
                  > Sent: Monday, May 21, 2012 12:46 PM
                  > Subject: RE: [pop-pop-steamboats] Re: put put battleship
                  >
                  >
                  >  
                  > How do you make it waterproof, Ryan? Just tape?
                  >  
                  > From:pop-pop-steamboats@yahoogroups.com [mailto:pop-pop-steamboats@yahoogroups.com] On Behalf Of RyanN
                  > Sent: Monday, May 21, 2012 12:52 PM
                  > To: pop-pop-steamboats@yahoogroups.com
                  > Subject: [pop-pop-steamboats] Re: put put battleship
                  >  
                  >  
                  > here are some photos.
                  >
                  > http://i.imgur.com/A21cx.jpg?1
                  > http://i.imgur.com/MFUWl.jpg?1
                  >
                  > --- In pop-pop-steamboats@yahoogroups.com, "RyanN" <deridex120@> wrote:
                  > >
                  > > A long time ago, I had a lot of time on my hands and built little ships
                  > > out of paper and tape- mainly to make july 4th more fun. nothing beats a
                  > > little war in the driveway.
                  > > Well, over the past 5 years I've improved one thing or another, model
                  > > after model, series after series have been constant improvements. My
                  > > most popular model can support a 20 lb barbell without caving.
                  > > impressive for paper.
                  > > (I would post pictures, but I haven't found any upload forms yet.)
                  > >
                  > > Anywho, I wanted to add the putput engine to one of the water-capable
                  > > models.
                  > >
                  > > I ran into a few problems.
                  > >
                  > > 1.) I could never perfect a boiler- every prototype leaked. I used JB
                  > > weld to fix a tin can together. I need a better epoxy glue, but I'm not
                  > > sure which one I need.
                  > >
                  > > 2.) Any boiler system I built (that could work temporarily) was
                  > > insufficient to push large, heavy crafts.
                  > > Typical ship dimensions:
                  > > approx 3~4 ft. length, approx 9 in. width, approx 3~4 in. height.
                  > > general weight, approx 10~15 lbs.
                  > >
                  > ________________________________
                  >
                  > This message, together with any attachments, may contain information which is privileged and confidential. If the reader of this message is not the intended recipient or the agent responsible for delivering it to the intended recipient, you are hereby notified
                  > that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the message, along with any attachments.
                  >
                Your message has been successfully submitted and would be delivered to recipients shortly.