Loading ...
Sorry, an error occurred while loading the content.

Re: [podcasters] Re: Live Show ?Hardware help

Expand Messages
  • Jason
    Easy peezy... Yeti blue and abelton Sent from my iPad ... [Non-text portions of this message have been removed]
    Message 1 of 10 , Feb 6, 2012
    • 0 Attachment
      Easy peezy... Yeti blue and abelton

      Sent from my iPad

      On Feb 6, 2012, at 7:06 PM, "Dave Mansueto" <tacomancini@...> wrote:

      > In this circumstance, you could also probably use the aux send bus (usually used for effects) to send a mix that is different then the monitor mix and master output to the guest. This maybe could save you the need of a second mixer and/or monitor mixer. But that mackie solution sure does look nice!
      >
      > davem
      >
      > --- In podcasters@yahoogroups.com, Derrick Young <derrickyoung95@...> wrote:
      > >
      > > Thanks so Much Dave. I think i have this figured out with the information
      > > you have provided. I think I need a combination of both options.
      > >
      > > using a mackie mixer or one with comparable features I can send my mic to
      > > the monitor when muted. then a small headphone mixer on the ALT outs so if
      > > i want to say rude comment about guest on phone i would just turn off their
      > > monitor port. I think spending a little more on the headphone amp/mixer is
      > > the key. the Mackie HMX-56 looks like a viable option
      > >
      > >
      > >
      > > On Sat, Feb 4, 2012 at 2:12 AM, Dave Mansueto <tacomancini@...> wrote:
      > >
      > > > **
      > > >
      > > >
      > > > Some mixers like Mackies have alternate routing. Like the mute buttons on
      > > > the 1202 and up actually send the signal to a different set of outputs. So
      > > > you put the primary left/rights out to your recorder, or the air, and you
      > > > mute your mic, but bring it back into the monitors (yours and the hosts) by
      > > > selecting both the main outs and alt 3/4 with the monitor selector. This
      > > > was a Mackie first feature, that is often copied by other mixer companies.
      > > >
      > > > The other option is to buy a second mixer, a simple 4 channel cheapie
      > > > behrenger would do. Then sub mix the monitor output from your primary mixer
      > > > with your producer mic source and send that output to the headphone
      > > > distribution amplifier.
      > > >
      > > > Dave M
      > > >
      > > >
      > > > --- In podcasters@yahoogroups.com, "derrick_young_95" <derrickyoung95@>
      > > > wrote:
      > > > >
      > > > > If this is not the right venue for this question or if the traffic on
      > > > this group has dropped off, I would also appreciate any information on
      > > > where might be a suitable place to ask this question.
      > > > >
      > > > > I have tried 2 local music stores that deal in pro audio and 2 ebay
      > > > sellers but have yet to get any kind of useful answer
      > > > >
      > > > >
      > > > > Derrick
      > > > >
      > > > >
      > > > > --- In podcasters@yahoogroups.com, "derrick_young_95" <derrickyoung95@>
      > > > wrote:
      > > > > >
      > > > > > We ran a weekly live show for about 18 month or so but the time it
      > > > took to do the show was starting to get to us so we packed it for a year to
      > > > get caught up on life. So we are now getting ready to relaunch the show but
      > > > I am really looking to take the Audio quality and fix a few short comings
      > > > we had previously.
      > > > > >
      > > > > > Our set up has a 12 channel mixer with 2 microphones plugged in. A
      > > > telephone is attached to the 3rd line and computer to the 4th line for
      > > > bumpers, lead in and such.
      > > > > >
      > > > > > So the host of the show is on Mic one. I as the producer am on mic2
      > > > and sometimes contribute and add to the on air conversation. guest being
      > > > being interviewed is on the phone (obviously).
      > > > > >
      > > > > > So what i want to be able to do is to talk through my mic to the host
      > > > or the guest without it going on air.
      > > > > >
      > > > > > so if the host is talking i can say to the guest on phone, we will be
      > > > live in 20 seconds. Or if the guest is a flop I can say to the host Wrap
      > > > things up this is a bust. But I still need to be able to talk on air if
      > > > needed.
      > > > > >
      > > > > > Currently we have 1 headset attached to the monitor port on the mixer.
      > > > So the host does not have a head set but I will be adding a 4 channel
      > > > headset amp to rectify this part.
      > > > > >
      > > > > > Anyway how do i make this happen?
      > > > > >
      > > > >
      > > >
      > > >
      > > >
      > >
      > >
      > > [Non-text portions of this message have been removed]
      > >
      >
      >
      >
      >
      > TODAY(Beta) • Powered by Yahoo!
      > Adorable rescue dog becomes ad sensation
      > This lovable pup helped shed light on an important cause while making his debut in a Super Bowl ad.
      > Privacy Policy

      [Non-text portions of this message have been removed]
    • Donald
      Dave, I believe you can achieve the same thing with the Behringer X1204USB using the source to Phone/Ctrl-Room settings Donald L. The Free COO
      Message 2 of 10 , Mar 8, 2012
      • 0 Attachment
        Dave,

        I believe you can achieve the same thing with the Behringer X1204USB
        using the source to Phone/Ctrl-Room settings

        Donald L.

        The Free COO <http://www.spreaker.com/show/the_free_coo>


        --- In podcasters@yahoogroups.com, "Dave Mansueto" <tacomancini@...>
        wrote:
        >
        > Some mixers like Mackies have alternate routing. Like the mute buttons
        on the 1202 and up actually send the signal to a different set of
        outputs. So you put the primary left/rights out to your recorder, or the
        air, and you mute your mic, but bring it back into the monitors (yours
        and the hosts) by selecting both the main outs and alt 3/4 with the
        monitor selector. This was a Mackie first feature, that is often copied
        by other mixer companies.
        >
        > The other option is to buy a second mixer, a simple 4 channel cheapie
        behrenger would do. Then sub mix the monitor output from your primary
        mixer with your producer mic source and send that output to the
        headphone distribution amplifier.
        >
        > Dave M
        >
        > --- In podcasters@yahoogroups.com, "derrick_young_95" derrickyoung95@
        wrote:
        > >
        > > If this is not the right venue for this question or if the traffic
        on this group has dropped off, I would also appreciate any information
        on where might be a suitable place to ask this question.
        > >
        > > I have tried 2 local music stores that deal in pro audio and 2 ebay
        sellers but have yet to get any kind of useful answer
        > >
        > >
        > > Derrick
        > >
        > >
        > > --- In podcasters@yahoogroups.com, "derrick_young_95"
        <derrickyoung95@> wrote:
        > > >
        > > > We ran a weekly live show for about 18 month or so but the time it
        took to do the show was starting to get to us so we packed it for a year
        to get caught up on life. So we are now getting ready to relaunch the
        show but I am really looking to take the Audio quality and fix a few
        short comings we had previously.
        > > >
        > > > Our set up has a 12 channel mixer with 2 microphones plugged in. A
        telephone is attached to the 3rd line and computer to the 4th line for
        bumpers, lead in and such.
        > > >
        > > > So the host of the show is on Mic one. I as the producer am on
        mic2 and sometimes contribute and add to the on air conversation. guest
        being being interviewed is on the phone (obviously).
        > > >
        > > > So what i want to be able to do is to talk through my mic to the
        host or the guest without it going on air.
        > > >
        > > > so if the host is talking i can say to the guest on phone, we will
        be live in 20 seconds. Or if the guest is a flop I can say to the host
        Wrap things up this is a bust. But I still need to be able to talk on
        air if needed.
        > > >
        > > > Currently we have 1 headset attached to the monitor port on the
        mixer. So the host does not have a head set but I will be adding a 4
        channel headset amp to rectify this part.
        > > >
        > > > Anyway how do i make this happen?
        > > >
        > >
        >




        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.