Re: [podcasters] Re: Need Advice: Multi-Location Talkshoe Hardware
>Ahh... gotcha .. I think.
> I love what I call button pushing software and making promos. There is
> nothing better than being able to do that live and to do it well to save on
> editing time.
Actually, I will confess that my "real job" title is technologist - which
where I work translates to, "he who handles anything with a plug." I'm a
programmer (VB.NET, ColdFusion & SQL), a hardware tech, network
administrator and contractor-wrangler.
As far as podcasting as a whole goes, I've only done one other project and
that was where I killed myself editing. Now there are few times when I
actually go in and edit and they all focus around catastrophic problems
And this sort of discussion is a reason I love podcasting so much. There is
> not one single way of doing things.So long as we don't start extolling the virtues of various Linux
distributions, I'm good with that!
[Non-text portions of this message have been removed]
- I don't see any reason why you should stop using Talkshoe if it's worked
well for you so far. As far as your technical requirements go, you may be
able to work it out by using an external USB/Firewire mixer with an Aux Send
control (like the Alesis MultiMix series of mixers). The setup would look
something look this:
1.) Host uses standard audio mic (not a USB mic) connected to the mixer.
2.) Co-host VOIP's into host's computer. His audio (along with the audio
from pre-recorded clips, etc.) is sent from the built-in audio output of the
host's computer into a channel on the external mixer.
3.) Talkshoe is set to use the external mixer as its "input device."
4.) Create a mix-minus signal using the Aux Sends of the mixer, zeroing out
the Send of the channel that the co-host is on and connect that to the
built-in audio input of the host's computer. Send that mix-minus signal to
the host's VOIP software so he can communicate with the co-host and not have
to worry about feedback issues. NOTE: This setup will likely eliminate the
co-host's ability to hear the pre-recorded audio, if that matters.
This should work, but it's only theoretical. It'd really depend on how well
Talkshoe plays with the external mixer. For example, I have a Tascam FW-1884
Firewire mixer. It will work with Skype but Skype will only recognize
channel one on the mixer. If the same were to hold true with Talkshoe, this
setup wouldn't work. (Also, to clarify - I'm using a Mac.) So, what I'm
saying is, I don't have an exact answer for you. But hopefully, this gives
you some ideas to work with.
On Wed, Jan 20, 2010 at 9:00 AM, C. Hatton Humphrey <chumphrey@...>wrote:
> I should have prefaced the variety of things that I'm using Talkshoe for -
> it helps to set all the facts out ahead of time and I apologize for not
> doing so.
> We make use of Talkshoe for a few reasons:
> * No need to handle the recording aspect of things. This was the biggest
> asset for us as when we started the show my co-host did not have a computer
> at his disposal during recordings and mine was unreliable. The computer
> issues have since been resolved but we don't want to make too many changes.
> * Coming in a close second is the reduced (but not removed) need to edit.
> Time is not something that I have an overabundance of and my past
> podcasting endeavors have always included a volume of editing that I never
> seemed to have time to do. By making the decision *not* to edit unless
> specifically required, I ensure that we actually have a show that comes out
> * The call, as it is being recorded, can be streamed live into SecondLife,
> where we have an audience that interacts with the show. BTR does NOT allow
> this... I've tried ;)
> * We can take calls during the recording of the show without pre-arranging
> them. Most of the time this is a good thing.
> So the question really is what equipment can I use to make the show sound
> good on TalkShoe with the assumption that both my co-host and I are able to
> VoIP in? I still need to be able to play audio clips into the recording,
> which could be done from another computer (and another VoIP connection) if
> needed. Removing the "live recording" aspects - the text chat, audio stream
> and call-in capabilities - would be counterproductive.
> Thanks again for the comments!
> [Non-text portions of this message have been removed]
http://shawnogram.com/ - multimedia blog
http://booksandwich.com/ - book reviews and more
http://haikuoffrustration.com/ - submit your own!
[Non-text portions of this message have been removed]
> This should work, but it's only theoretical. It'd really depend on how wellThat does, thanks! I knew it wasn't "pushbutton simple" but it does
> Talkshoe plays with the external mixer. For example, I have a Tascam FW-1884
> Firewire mixer. It will work with Skype but Skype will only recognize
> channel one on the mixer. If the same were to hold true with Talkshoe, this
> setup wouldn't work. (Also, to clarify - I'm using a Mac.) So, what I'm
> saying is, I don't have an exact answer for you. But hopefully, this gives
> you some ideas to work with.
give me a place to start looking! The good thing is that I'm already
using a directed input to the show using X-Lite to dial in.
To paraphrase Erk, there seem to be as many different solutions as
there are wire colors. Figuring out which one will work best (and
simplest) is going to be the fun challenge!