Loading ...
Sorry, an error occurred while loading the content.

Re: [perseus_SDR] Re: AGC SET UP

Expand Messages
  • elan paim
    Hello Roelof many thanks for this info i set it now on low and it much better this way , it was on 25 as default. thank you Elan ... From: Roelof Bakker
    Message 1 of 5 , Aug 4, 2009
    • 0 Attachment
      Hello Roelof
      many thanks for this info i set it now on low and it much better this way , it was on 25 as
      default.
      thank you

      Elan


      --- On Tue, 4/8/09, Roelof Bakker <roelof@...> wrote:

      From: Roelof Bakker <roelof@...>
      Subject: Re: [perseus_SDR] Re: AGC SET UP
      To: perseus_SDR@yahoogroups.com
      Date: Tuesday, 4 August, 2009, 9:37 PM

       
      Hello Elan,

      I assume that you are talking about the AGC threshold setting.
      For weak signal work, either CW or AM a low setting will work best.
      My setting for AGC threshold is 8.

      However for weak signal work the AGC is mostly switched off.
      I only use it to get a more stable reading on the dBm scale.

      I hope this helps.

      Best regards,
      Roelof Bakker, pa0rdt

    Your message has been successfully submitted and would be delivered to recipients shortly.