RE: [perseus_SDR] Perseus and CW & RTTY Reverse
- Fabio,It seems that Commander and Logger32 hasn't followed the changes in Perseus. This was changed one or two years ago.You have to contact the developer to correct this.73,Guido.
Van: perseus_SDR@yahoogroups.com [mailto:perseus_SDR@yahoogroups.com] Namens IZ8MBW Fabio
Verzonden: maandag 26 augustus 2013 10:30
Onderwerp: [perseus_SDR] Perseus and CW & RTTY ReverseI use the latest version of Commander (by DXLab) to sync the Yaesu FT-857D VFO with the Perseus SDR receiver (so Perseus will follow the Yaesu VFO/Modes and vice versa).The problem is: every time on the Yaesu I choose CW and DIG (Digital modes) the Perseus goes always in reverse mode, example:Yaesu FT-857D CW -> Perseus CW ReverseYaesu FT-857D DIG -> Perseus RTTY ReverseYaesu FT-857D CW Reverse -> Perseus CWI have tried also another software that supports CAT (Logger32 that supports both generic Icom and Perseus) connected to Perseus (so without Commander) and always I sent via CAT the mode CW, the Perseus goes in Reverse CW, the same happens for RTTY....So it seem that the problem is not Commander and/or Logger32, but the Perseus software that "recognize" the CW mode as Reverse CW and RTTY as Reverse RTTY....There are some settings in the Perseus to solve it? Or there is a workaround?Many many thanks!!Best 73Fabio, IZ8MBW
Geen virus gevonden in dit bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 2013.0.3392 / Virusdatabase: 3211/6607 - datum van uitgifte: 08/25/13