Re: [perseus_SDR] Re: Alternative VAC?
- Hi Dirk,
> Thanks for the tip, but if resampling is supposed to be the problem, how doI assumed spectral distortions, the same that I initially oberserved here when
> you explain that it can work perfectly for say, one hour, and then suddenly
> cause the glitch I described? Also note that the phenomenon was reported for a
> wide variety of hardware and OS-versions.
using Speclab. After setting in/out SR to 31250 those disapeared entirely.
In your case it seems that after a while there is a buffer overrun or another
hickup that causes a brief loss of samples. The reason I don't know of course.
What I meant to say is, that VAC works flawlessly here when set to 31250 /
In my case there was another problem: The output-audio of SpecLab showed buffer
overuns, causing brief clicks. The reason: The soundcard fetches samples from
SpecLab at its own rate, that might be a slightly different than the
Perseus-VAC-delivered rate. Once I enabled SpecLab's audio resampler the
problem was gone.
Jurgen Bartels Suellwarden, N. Germany
Ant. hor: 29-45MHz 7-el, 45-87MHz 11-el, FM 15.11, Band-3:13-el, UHF:48-el
TV: Winradio G305 / Fly2000 + video noise filter & variable IF BW
FM: Downconverter + Perseus + Speclab as WFM demod.
MW: 300m Bev 260°, 30 x 4m EWE 320° with JB-terminator, Winradio & Perseus