Loading ...
Sorry, an error occurred while loading the content.
 

Re: Getting content from ListView32 window

Expand Messages
  • Dennis K. Paulsen
    I/We ll need to look at this issue. If you have the time to document the bug at http://sourceforge.net/projects/winguitest please do so.. Thanks, Dennis ...
    Message 1 of 3 , Apr 29, 2005
      I/We'll need to look at this issue. If you have the time to
      document the bug at http://sourceforge.net/projects/winguitest
      please do so..


      Thanks,
      Dennis

      --- In perlguitest@yahoogroups.com, "alex_73_1" <alex_73_1@y...>
      wrote:
      >
      >
      > Hi,
      >
      > Great module, I started using it and run into slight problem.
      > I'm mapping and unmapping drives in WinXP, so when I get to
      > disconnect network drive window, it consist of ListView32
      > window with list of currently connected drives. After
      > executing GetListViewContets on this window, I get back a list
      with 5
      > items, which is the correct number of drives currently mapped, but
      > when I try to print out contents of the items, it just print
      blanks.
      > So I can't figure out which disk to select with SelListViewItem.
      >
      > Here is the piece of code I use:
      >
      > ##...bunch of code to get the window.....
      > @disconnect_drive_window = FindWindowLike(0, "Disconnect Network
      > Drives");
      > @ndrives_list_window = FindWindowLike($disconnect_drive_window
      > [0], "Network Drives", "SysListView32", DRIVES_LIST_BOX);
      > my @lst = GetListViewContents($ndrives_list_window[0]);
      > for (@lst) {
      > print "[$_]\n";
      > }
      >
      > Any help would be appriciated...
      >
      > Also as a side note, if I want to help with the development or
      > contribute to the development who do I ask?:)
    • alex_73_1
      Will do so tonight... Any way I can contribute to this module? Alex. ... but
      Message 2 of 3 , May 1, 2005
        Will do so tonight... Any way I can contribute to this module?

        Alex.
        --- In perlguitest@yahoogroups.com, "Dennis K. Paulsen"
        <ctrondlpaulsden@y...> wrote:
        >
        > I/We'll need to look at this issue. If you have the time to
        > document the bug at http://sourceforge.net/projects/winguitest
        > please do so..
        >
        >
        > Thanks,
        > Dennis
        >
        > --- In perlguitest@yahoogroups.com, "alex_73_1" <alex_73_1@y...>
        > wrote:
        > >
        > >
        > > Hi,
        > >
        > > Great module, I started using it and run into slight problem.
        > > I'm mapping and unmapping drives in WinXP, so when I get to
        > > disconnect network drive window, it consist of ListView32
        > > window with list of currently connected drives. After
        > > executing GetListViewContets on this window, I get back a list
        > with 5
        > > items, which is the correct number of drives currently mapped,
        but
        > > when I try to print out contents of the items, it just print
        > blanks.
        > > So I can't figure out which disk to select with SelListViewItem.
        > >
        > > Here is the piece of code I use:
        > >
        > > ##...bunch of code to get the window.....
        > > @disconnect_drive_window = FindWindowLike(0, "Disconnect Network
        > > Drives");
        > > @ndrives_list_window = FindWindowLike($disconnect_drive_window
        > > [0], "Network Drives", "SysListView32", DRIVES_LIST_BOX);
        > > my @lst = GetListViewContents($ndrives_list_window[0]);
        > > for (@lst) {
        > > print "[$_]\n";
        > > }
        > >
        > > Any help would be appriciated...
        > >
        > > Also as a side note, if I want to help with the development or
        > > contribute to the development who do I ask?:)
      Your message has been successfully submitted and would be delivered to recipients shortly.