Loading ...
Sorry, an error occurred while loading the content.

Re: [ov-10fans] Question about quarter-circle vanes/disks on the wing-tops of OV-10s

Expand Messages
  • John
    The spoilers on the OV-10 were installed to compensate for the short wing. Without them the adverse yaw would be very hard to deal with. They were always ready
    Message 1 of 3 , Nov 11, 2012
    • 0 Attachment
      The spoilers on the OV-10 were installed to compensate for the short wing. Without them the adverse yaw would be very hard to deal with. They were always ready to pop up, as the flight control system was 100% mechanical

      John van Etten


      On Nov 11, 2012, at 1:17 PM, Jim Hodgson <txavi8or@...> wrote:

       

      Hi John,


      They are spoilers that aid the turning capability of the Bronco.  For instance at max knots, the Bronco has a 500' turn radius.

      Regards,

      Jim


      On Nov 11, 2012, at 11:53 AM, "jwhangen" <jwhangen@...> wrote:

       

      Good Afternoon Everyone,

      Just 2 questions about the quarter-circle vanes/disks that come out of the OV-10s wing when aerilons are at maximum deflection:   

      These things:   http://www.scaleaero.com/images/Spoiler@...

      1)  If the (for example) right aerilon is fully down, then the vanes on the left (opposite) wing would be deployed full up?  And vice-versa?

      2) the photos I see of these always show them as being white.    Would that hold true for a VMO-2 -A model from the mid-1970s?   Wasn't sure if maybe they'd be painted red so they'd stand out more visually to show that they are deployed.

      Thank you as always!
      John



    Your message has been successfully submitted and would be delivered to recipients shortly.