Loading ...
Sorry, an error occurred while loading the content.

4722Ad: NuttX configuration for Olimex STM32-P207 board

Expand Messages
  • Lederhilger Martin
    Nov 14, 2013
      Ad: NuttX configuration for Olimex STM32-P207 board


       the attachment contains a patch file which

      - adds CAN_TSEG1 and CAN_TSEG2 options to the Kconfig file of STM32. This is
      necessary so that CAN_TSEG2 can be set to 8 for the Olimex board to achive a
      baud rate of exactly 250 kbps - previously CAN_TSEG2 was set to the default
      value of 7 which leads to a slightly different baud rate causing transmission

      - disables loopback mode for CAN - otherwise received packets are not seen.
      Note that the CAN example is disabled too.

      This patch file applies to nuttx-6.31.


      Martin Lederhilger

    • Show all 2 messages in this topic