Loading ...
Sorry, an error occurred while loading the content.

Avoiding writes to USB flash disk

Expand Messages
  • mrthreeplates
    Hi, For those of you using the NSLU2 with only a flash disk, you may be interested in this. I ve been looking into minimizing writes to prolong the life of
    Message 1 of 1 , Aug 31 10:18 PM
    • 0 Attachment
      Hi,

      For those of you using the NSLU2 with only a flash
      disk, you may be interested in this. I've been
      looking into minimizing writes to prolong the life
      of the flash disk. This is probably not a big deal,
      but why burn out something sooner than necessary?

      I discovered that simply accessing a file (reading) can
      cause the OS to update that file's access time. This
      causes a write to the filesystem even though you didn't
      intend it. You could mount the filesystem read-only,
      but that becomes inconvienent.

      There are a couple of ways you can prevent this, one
      is on a per-file basis and the other is filesystem wide.

      To turn off the updating of the access times, mount
      the filesystem with "noatime". I just tested this
      with a vfat filesystem and it seemed to work.

      If you already have your vfat filesystem mounted (e.g.
      with a single usb flash drive like me), you can type this
      (as root):

      Note: (first check the output of the mount or df commands to
      make sure your devices are the same).

      # mount -t vfat -o remount,noatime /dev/sdb1 /share/flash/data

      If you want to verify that this is working (to
      check i/o stats), type the following command:

      # cat /proc/stat

      ...
      disk_io: (8,1):(953,949,52698,4,4)
      ...

      This means there were 953 total I/Os to my device
      (I assume 8,1 means /dev/sdb1). There were 949 reads
      and 4 writes.

      If you run the cat command in a loop in one window and do activity
      in another, you can play around and get feedback on what you
      are doing and how it affects the filesystem.

      Regards,

      George
    Your message has been successfully submitted and would be delivered to recipients shortly.