Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-linux] Re: telnet to Redboot

Expand Messages
  • Thomas Noel
    Already set just that way. ... If you can read this, thank a teacher. If you are reading it in English, thank a soldier
    Message 1 of 13 , Aug 30, 2004
    • 0 Attachment
      Already set just that way.
      On Aug 30, 2004, at 6:25 AM, paulbart1234 wrote:

      > --- In nslu2-linux@yahoogroups.com, "painlesstom" <tnoel@m...> wrote:
      >> I am unable to connect to a Redboot prompt on either my "bricked"
      > unit
      >> or my factory-fresh working unit. Results on both are the same:
      >
      > It's possible that if you're disconnecting from your home
      > network/connecting direct to the NSLU2, on the temporary loss of
      > ethernet connection, your PC has reset its connection info/is trying
      > to DHCP an address again. In this case, you wouldn't have any
      > network connectivity until you get an address (which you won't
      > receive if you've disconnected from the home net).
      >
      > Something to try: configure your PC's network adapter to have
      > a 'fixed/static' IP (like: 192.168.0.2, netmask 255.255.255.0).
      >
      > - Paulb
      >
      >
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      If you can read this, thank a teacher.
      If you are reading it in English, thank a soldier
    Your message has been successfully submitted and would be delivered to recipients shortly.