Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-linux] Possible brick recovery?

Expand Messages
  • Jim Thompson
    I am full of doubt that this is in RedBoot. (Its fairly standard in PMON to checksum the flash before attempting to boot it, this trick basically makes sure
    Message 1 of 3 , Aug 29, 2004
    • 0 Attachment
      I am full of doubt that this is in RedBoot. (Its fairly standard in
      PMON to checksum the flash before attempting to boot it, this trick
      basically makes sure
      the flash checksum fails.)

      but I'll be delighted if I'm wrong.

      On Aug 29, 2004, at 6:55 AM, Tommy B wrote:

      >
      > I wrote the Openwrt post. The NSLU2 uses a different bootloader. The
      > source for the upgrade is provided by linksys.
      > I might be worth our time to figure it out. Then you can just hold the
      > power button or reset button for >3 seconds and
      > trigger the upgrade.
      >
      >
      >
      > smakofsky wrote:
      >
      >> Anyone try out this method for the WRT54G on the NSLU2?
      >>
      >> http://voidmain.is-a-geek.net:81/redhat/wrt54g_revival.html
      >> http://openwrt.org/forum/viewtopic.php?t=17
      >>
      >> Looks like it's basically the same flash chip, any thoughts if
      >> shorting pins 15/16 on the flash at poweron will put it into a
      >> failsafe mode or not?
      >>
      >>
      >>
      >>
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >>
      >>
      >>
      >>
      >
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.