I'm seeking the same thing. I'm now using a 60GB notebook hard disk
(5,400 RPM - fast for notebook HDD), in a small external case. The idea
is that when I'm at home, I can plug it into my NSLU2 and share it
between several PCs. When I travel, I can just hook up the tiny drive to
my laptop via USB and carry my files/mp3s with me.
Since the data contained would be the same stuff I'd keep on my desktop,
it needs encrypting so that if it were lost/stolen whilst travelling,
I'd have a level of protection.
To avoid excess processing on the Slug, I think I'll create an image
file of a filesystem, then use the Slug's samba to share it. I can then
mount the image on each client PC and use it that way.
I hope that makes sense?!
> I would like to guard against my attached harddisk (to the NSLU2)
> being stolen and then accessed on a linux PC (thereby gaining access
> to all my stored files).
> Under linux you can setup a local loopback device encrypting the
> entire harddisk. This could be an ideal solution as you would only
> need to supply a password during bootup of the NSLU2 and from then on
> the disk is available for use as normal (and you'd normally leave the
> NSLU2 on).
> A URL... http://encryptionhowto.sourceforge.net/Encryption-HOWTO.html
> Has anyone tried doing something like this?
> My concerns are...
> 1. Is the NSLU2 box powerful enough to deal with the
> 2. The practicalities of specifying the password at bootup (NSLU2
> bootup is normally a non-interactive process).
> 3. I'm going to have to mess about with the Kernel as I assume the
> crypto modules won't be available.
> Any comments welcome.
> James Covey-Crump
> [ Moderator Note: All static information is slowly moving to the Wiki at http://www.nslu2-linux.org ]